Caterpillar SKID STEER LOADER 277 - catalog of spare parts
Dimensions
Track Width - 6.3 ft.
Length with Bucket - 12.2 Feet in
Length without bucket - 9.6 feet in
Height to Cab Top - 6.9 Feet in
Ground clearance - 13.9 inches
Ground clearance at Max Lift and Dump - 7.6 feet per
Reach at Max Lift and Dump - 2.3 feet in
Turn radius from center - incl. Bucket - 100.2 inches
Chassis
The ground is 6.71 feet long.
Choose SKID STEER LOADER 277 section:
Specifications
engine
The number of cylinders - 4
Engine make - 2236
Engine Model - 3034T
Gross Power - 80 HP
Net power - 74 hp
Measured Power @ - 2600 rpm
Displacement - 183cu in
Hole - 3.9 inches
4 inch travel
Aspiration - Turbocharged
Engine Model - Cat 3034 Turbocharged
Operational
Working Weight - 9,226 lbs
Fuel capacity - 21.7 gal
The volume of the hydraulic system - 13.8 g
Max. Speed - High Range - 6.1 mph
Power train
6 mph
Reverse Speed - 6 Mph
Chassis
The length of the path on earth is 6.8 feet in
Track Width - 17.8 inches
Weights
Working Weight 9126 lbs.
Loader
Workload - 2,950 pounds
Tipping angle - 6561 degrees
Bucket Capacity - 0.7yd3
Hydraulic
Pump flow rate - 22.2 gal / min
Dimensions
Track Width - 6.23 Feet
Height to Cab Top - 6.81 Feet in
Ground clearance - 13.9 inches
Ground clearance at Max Lift and Dump - 7.59 ft.
Reach at Max. Lift and Dump - 2.22 ft in
Performance characteristics
Rated Operating Power - 50% Tipping Load - 2,950 lbs.
Nominal Operating Power - 35% Tipping Load - 2065 lbs
Ground Contact Area - 2898in2
Ground Pressure - 3.1 psi
Tipping Load - 5,900 lbs.
Breakout Force - Tilt Cylinder - 5,259 lbs
Breakout Force - Lift Cylinder - 4,339 lbs.
Service replenishment options
Cooling system - 2.6gal
Fuel tank - 22.7 gal
Hydraulic Tank - 9.2 Gallons
Crankcase - 1.8gal
Hydraulic system - 13.7 gal