Caterpillar SKID STEER LOADER 272D2 XHP - catalog of spare parts
Dimensions
Ground clearance - 0.9 feet in
Wheelbase - 4.6 feet in
Bucket Pin Height - Maximum Lift Height - 10.8 Feet
Height - Cab Top - 7 ft.
Length - Without Bucket - 127 Inches
Length - with bucket on the ground - 155 inches
Maximum total height - 161.5 inches
Bucket Finger Height - Carry Position - 9.3 inches
Ground clearance at maximum lift and unload - 97.4 inches
Departure angle - 28 degrees
Maximum angle of dumping - 51 degrees
A-pillar angle - maximum height - 84 degrees
Pin Bucket Lug - Maximum Rise - 13.5 Inches
Achieve - maximum lift / reset - 29 inches
Rollback angle - 28 degrees
Turning radius from center - rear of car - 74.7 inches
Center Turn Radius - Coupling - 57.7 inches
Center Turn Radius - Bucket (Rack) - 90.6 inches
Maximum reach - with arms parallel to the ground - 49.1 inches
Width of the car over tires - 76 inches
Bumper protrusion - behind the rear axle - 46.2 inches
Choose SKID STEER LOADER 272D2 XHP section:
Specifications
engine
Displacement - 232cu per
Hole - 3.9 inches
4.7 inch travel
Net Power - ISO 9249 - 107 HP
Gross Power - SAE J1995 - 110hp
Engine Model - Cat C3.8 DIT (Turbo)
Net Power - SAE 1349 - 106 HP
Peak Torque - 1,500 rpm - SAE J1995 - 276 lb-ft
Flywheel net power - 106hp
Power train
Travel Speed - Forward or Reverse - One Speed - 7.2 mph
Speed - Forward or Reverse - Two speeds - 10.3 mph
Weights
Working Weight - 55 lbs.
The note
Operating weight, performance and dimensions, designed for an operator weighing 75 kg (165 lbs), all fluids, two-speed, smooth motion system, enclosed cab with a glass door, side windows, air conditioning, air-operated seat, extended display, rear view camera, 1,000 CCA battery, double-sided, self-leveling, 1981 mm (78 in) dirt bucket, without additional counterweights, Cat PC 14 17.5 tires, and quick coupler (unless otherwise specified).
Hydraulic system
Hydraulic flow - XHP - maximum hydraulic flow of the loader * - 40 gal / min
Note - * When using Cat 400 Series Tools.
Standard Flow Mode - Loader Hydraulic Pressure - 3335 psi
Hydraulic Flow - XHP - Maximum Loader Hydraulic Pressure - 4061 psi
Hydraulic flow - XHP - Hydraulic power (calculated) - 94 hp
Standard Flow Mode - Loader Hydraulic Flow - 23 gallons / min
Standard flow mode - Hydraulic power - Estimated - 44 hp
Performance characteristics
The note
Operating weight, performance and dimensions, designed for an operator weighing 75 kg (165 lbs), all fluids, two-speed, smooth motion system, enclosed cab with a glass door, side windows, air conditioning, air-operated seat, extended display, rear view camera, 1,000 CCA battery, double-sided, self-leveling, 1981 mm (78 in) dirt bucket, without additional counterweights, Cat PC 14 17.5 tires, and quick coupler (unless otherwise specified).
3,900 lbs. Rated capacity with optional counterweight
Tipping Load - 7,300 lbs.
Breakout Force - Tilt Cylinder - 7362 lbs
Breakout Force - Lift Cylinder - 6085 lbs
Nominal Working Capacity - 3,650 lbs.
Service replenishment options
Cooling system - 4.1 gal
Fuel Tank - 32.2 gallons
Hydraulic Tank - 10.3 Gallons
Crankcase - 3.5gal
Hydraulic system - 14.5 gal
Diesel Exhaust Fluid (DEF) - 5 gallons
Chain Box - Each Side - 2.7 gal
Taxi
ROPS - ISO 3471: 2008
FOPS - ISO 3449: 2005 Level I
FOPS Level II - ISO 3449: 2005 Level II
Air conditioning system
Air conditioning
The air conditioning system on this unit contains the fluorinated greenhouse refrigerant R134a (global warming potential = 1430). The system contains 0.81 kg of refrigerant with a CO2 equivalent of 1.158 metric tons.
Noise level
Note (1)
Cab and Roll Over Protective Structures (ROPS) are standard in North America and Europe.
Note (2)
** Declared dynamic sound pressure levels of the operator according to ISO 6396: 2008. The measurements were carried out with the doors and windows of the cabin closed and at 70% of the maximum engine cooling fan rotation speed. Sound levels may vary at different speeds of the engine cooling fan.
Note (3)
*** The indicated sound power level for marked CE configurations when measured in accordance with the test procedure and conditions specified in 2000/14 / EC.
Inside the cab ** - 83 dB (A)
External cab *** - 104 dB (A)