Caterpillar SKID STEER LOADER 272D2 - catalog of spare parts
Dimensions
Ground clearance - 0.8 feet in
Wheelbase - 4.6 feet in
Bucket Finger Height - Maximum Lifting Height - 10.6 Feet
Height - Cab Top - 6.9 Feet in
Length - Without Bucket - 127.6 inches
Length - with bucket on the ground - 155.7 inches
Maximum overall height - 160.1 inches
Bucket Finger Height - Carry Position - 7.8 inches
Clearance at maximum lift and unload - 96 inches
Departure angle - 27 degrees
Maximum angle of dumping - 51 degrees
A-pillar angle - maximum height - 84 degrees
Pin Bucket Lug - Maximum Rise - 14.7 Inches
Achieve - Maximum Rise / Drop - 30.3 inches
Rollback angle - 28 degrees
Turning radius from center - rear of car - 74.7 inches
Center Turn Radius - Coupling - 58.3 inches
Center Turn Radius - Bucket (Rack) - 89.8 inches
Maximum reach - with arms parallel to the ground - 50.5 inches
The width of the car over the tires - 72 inches
Bumper protrusion - behind the rear axle - 46.2 inches
Choose SKID STEER LOADER 272D2 section:
Specifications
engine
Displacement - 232cu per
Hole - 3.9 inches
4.7 inch travel
Net Power - ISO 9249 - 96 HP
Gross Power - SAE J1995 - 98 HP
Engine Model - Cat C3.8 DIT (Turbo)
Net Power - SAE 1349 - 95 HP
Peak Torque - 1,500 rpm - SAE J1995 - 246 lb-ft
Flywheel net power - 95 hp
Power train
Travel Speed - Forward or Reverse - One Speed - 6.6 mph
Driving Speed - Forward or Reverse - Two Speed - 9.4 mph
Weights
Operating Weight - 8768 lbs
The note
Operating Weight, Performance and Dimensions for 75 kg (165 lb) operator, all fluids, one speed, enclosed cab with glass door, side windows, heater, mechanical suspension seat, improved display, standard hydraulic flow system, battery 880 CCA, Dirt Bucket 1829 mm (72 in.), No Additional Counterweights, Cat PC 12 16.5 Tires, and Hand Drive Quick Coupler (Unless otherwise specified).
Hydraulic system
Hydraulic flow - High Flow XPS - Hydraulic power (calculated) - 76 hp
Hydraulic Flow - Standard - Loader Hydraulic Pressure - 3335 psi
Hydraulic Flow - Standard - Loader Hydraulic Flow - 23 gallons / min
Hydraulic flow - Standard - Hydraulic power (rated) - 44 hp
Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Pressure - 4061 psi
Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Flow - 32 gallons / min
Performance characteristics
The note
Operating Weight, Performance and Dimensions for 75 kg (165 lb) operator, all fluids, one speed, enclosed cab with glass door, side windows, heater, mechanical suspension seat, improved display, standard hydraulic flow system, battery 880 CCA, Dirt Bucket 1829 mm (72 in.), No Additional Counterweights, Cat PC 12 16.5 Tires, and Hand Drive Quick Coupler (Unless otherwise specified).
Nominal Working Capacity with Extra Counterweight - 3,650 lbs
Tipping Load - 6,800 pounds
Breakout Force - Tilt Cylinder - 7443 lbs.
Breakout Force - Lift Cylinder - 6074 lbs.
Nominal Capacity 3400 lbs
Service replenishment options
Cooling system - 4.1 gal
Fuel Tank - 32.2 gallons
Hydraulic Tank - 10.3 Gallons
Crankcase - 3.5gal
Hydraulic system - 14.5 gal
Diesel Exhaust Fluid (DEF) - 5 gallons
Chain Box - Each Side - 2.7 gal
Taxi
ROPS - ISO 3471: 2008
FOPS - ISO 3449: 2005 Level I
FOPS Level II - ISO 3449: 2005 Level II
Air conditioning system
Air conditioning
The air conditioning system on this unit contains the fluorinated greenhouse refrigerant R134a (global warming potential = 1430). The system contains 0.81 kg of refrigerant with a CO2 equivalent of 1.158 metric tons.
Noise level
Inside the cab * - 83 dB (A)
External cab ** - 102 dB (A)
Note (1)
Cab and Roll Over Protective Structures (ROPS) are standard in North America and Europe.
Note (2)
* Declared dynamic sound pressure levels of the operator according to ISO 6396: 2008. The measurements were carried out with the doors and windows of the cab closed and at 70% of the maximum speed of rotation of the engine cooling fan. Sound levels may vary at different speeds of the engine cooling fan.
Note (3)
** Indicated sound power level for marked CE configurations when measured in accordance with the test procedure and conditions specified in 2000/14 / EC.