Caterpillar SKID STEER LOADER 272D XHP - catalog of spare parts
Dimensions
Ground clearance - 0.9 feet in
Wheelbase - 4.6 feet in
Bucket Pin Height - Maximum Lifting Height - 10.7 Feet
Height - Cab Top - 7.1 Feet in
Length - Without Bucket - 123.5 Inches
Length - with bucket on the ground - 151.8 inches
Maximum total height - 161.4 inches
Bucket Finger Height - Carry Position - 7.7 Inches
Ground clearance at maximum lift and unload - 97.2 inches
Departure angle - 28 degrees
Maximum angle of dumping - 52 degrees
A-pillar angle - maximum height - 83 degrees
Turning radius from center - rear - 73.7 inches
Center Turn Radius - Coupling - 57.6 inches
Rotate Radius From Center - Bucket - 90.8 Inches
Maximum reach - with weapons in parallel - 49.6 inches
Pin Bucket Lug - Maximum Hoist - 14.9 Inches
Achieve - maximum lift / reset - 30 inches
Width of the car over tires - 76 inches
Bumper Lug - Rear Axle - 42.8 inches
Choose SKID STEER LOADER 272D XHP section:
Specifications
engine
Gross Power - 110 HP
Displacement - 232cu per
Hole - 3.9 inches
4.7 inch travel
Gross Power - SAE J1995 - 110hp
Engine Model - Cat C3.8 (Turbocharged)
Net Power - ISO 9249 EEC - 107 HP
Net Power - SAE 1349 - 106 HP
Flywheel net power - 106hp
Power train
Forward Speed - 7.2 miles per hour
Reverse Speed - 7.2 Mph
Speed Reverse - 2-speed - 10.3 mph
Forward Speed - 2-Speed - 10.3 mph
Weights
Working Weight - 9,137 lbs
Hydraulic system
Hydraulic flow (1) - standard flow mode
Hydraulic Flow (2) - High Flow XHP
Loader Hydraulic Flow (1) - 23 gallons / min
Loader hydraulic flow (2) - 40 gal / min
Loader Hydraulic Pressure (1) - 3335 psi
Hydraulic power - calculated (1) - 44 hp
Loader Hydraulic Pressure (2) - 4061 psi
Hydraulic power - calculated (2) - 94 hp
Performance characteristics
Tipping Load - 7,400 pounds
Breakout Force - Tilt Cylinder - 7,348 lbs
Breakout Force - Lift Cylinder - 6087 lbs
Nominal Working Capacity - 3,700 lbs.
Service replenishment options
Cooling system - 4.1 gal
Fuel Tank - 32.2 gallons
Hydraulic Tank - 10.3 Gallons
Crankcase - 3.5gal
Hydraulic system - 14.5 gal
Chain Box - Each Side - 2.7 gal
Taxi
ROPS - ISO 3471: 2008
FOPS - ISO 3449: 2005 Level I
FOPS Level II - ISO 3449: 2005 Level I