Caterpillar SKID STEER LOADER 272D - catalog of spare parts
Dimensions
Hinge Axle Height - Fully Raised - 126.7 Inches
Length with Bucket - 12.7 Feet in
Length without bucket - 10.3 feet in
Tire Width - 6.4 Feet in
Cab Height - 7 ft.
Ground clearance at Max Lift and Dump - 8 ft.
Wheelbase - 4.6 feet in
Ground clearance - 8.9 inches
Reach at Max Lift and Dump - 31 in.
Turning radius from center - rear of car - 73.8 inches
Wheelbase - 4.6 feet in
Bucket Finger Height - Maximum Lifting Height - 10.6 Feet
Height - Cab Top - 7 ft.
Length - Without Bucket - 123.6 Inches
Length - with bucket on the ground - 151.6 inches
Maximum total height - 159.4 inches
Bucket Finger Height - Carry Position - 7.9 Inches
Ground clearance at maximum lift and unload - 95.2 inches
Departure angle - 25 degrees
Maximum angle of dumping - 52 degrees
A-pillar angle - maximum height - 83 degrees
Turning radius from center - rear - 73.8 inches
Turning radius from center - hitch - 58.9 inches
Turning radius from center - bucket - 91.5 inches
Maximum reach - with weapons in parallel - 50.7 inches
Bucket Pin Departure - Maximum Lifting Height - 16.1 inches
Achieve - Maximum Rise / Drop - 30.9 inches
Width of the car over tires - 76 inches
Bumper Lug - Rear Axle - 42.7 inches
Choose SKID STEER LOADER 272D section:
Specifications
engine
Engine Model - C3.8 (Turbocharged)
Gross Power - 98 HP
Net power - 95 hp
Displacement - 232cu per
Hole - 3.9 inches
4.7 inch travel
Gross Power - SAE J1995 - 98 HP
Engine Model - Cat C3.8 (Turbocharged)
Net Power - ISO 9249 EEC - 95 HP
Net Power - SAE 1349 - 95 HP
Flywheel net power - 95 hp
Operational
Operating Weight - 18,527.7 lbs.
Fuel capacity - 31 gal
Cooling system capacity - 3.7 gallons
2.7 gallon engine oil
Hydraulic Capacity - 16.2 Gallons
The volume of fluid in the box - each side - 2.3 gal
Top Speed - 6.6 Mph
Tire size - 14 x 17.5
Operating voltage - 12 V
Generator current strength - 100 amperes
Power train
6.6 mph forward
Reverse Speed - 6.6 mph
Speed reverse - 2-speed - 9.4 mph
Forward Speed - 2-Speed - 9.4 mph
Weights
Working Weight - 8,404 lbs
Loader
Tipping Load (ISO 14397) - 6,400.1 lbs.
Hydraulic system
Hydraulic flow (1) - standard
The maximum hydraulic flow of the loader is 32 gallons / min.
Loader Maximum Hydraulic Pressure - 4061 psi
Loader Hydraulic Pressure - 3335 psi
Loader Hydraulic Flow - 23 gallons / min
Hydraulic Flow (2) - High Flow XPS
Loader Hydraulic Flow (1) - 23 gallons / min
Loader Hydraulic Flow (2) - 32 gallons / min
Hydraulic power (2) - 76 hp
Hydraulic power (1) - 44 hp
Loader Hydraulic Pressure (1) - 3335 psi
Hydraulic power - calculated (1) - 44 hp
Loader Hydraulic Pressure (2) - 4061 psi
Hydraulic power - calculated (2) - 76 hp
Dimensions
Length with Bucket - 12.64 Feet in
Tire Width - 6.34 ft in
Height to Cab Top - 6.91 Feet in
Wheelbase - 4.55 feet in
Ground clearance - 8.9 inches
Fength without bucket - 10.3 feet in
Ground clearance at Max Lift and Dump - 7.94 feet in
Get to the Max Lift and Dump - 30.91 in.
Performance characteristics
Nominal Working Capacity with Optional Counterweight - 3,450 lbs
6400 lb Tipping Load
Breakout Force - Tilt Cylinder - 7,405 lbs
Breakout Force - Lift Cylinder - 6,100 lbs
Nominal Working Capacity - 3,200 pounds
Service replenishment options
Cooling System - 3.7gal
Fuel tank - 30.8 gal
Hydraulic Tank - 10.3 Gallons
Crankcase - 2.6gal
Hydraulic system - 16 gal
Chain box - each side - 2.3 gal
Taxi
ROPS - SAE J1040 MAY94, ISO 3471: 1994
FOPS - SAE J1043 SEPT87, ISO 3449: 1992 Level I
FOPS Level II - SAE J231 JAN81, ISO 3449: 1992 Level II