Caterpillar SKID STEER LOADER 272C - catalog of spare parts
Dimensions
Length with Bucket - 12.5 Feet in
Length without bucket - 10.8 feet in
Tire Width - 5.5 Feet in
Height to Cab Top - 6.9 Feet in
Ground clearance at Max Lift and Dump - 8.2 feet in
Wheelbase - 4.5 feet in
Ground clearance - 8.8 inches
Get to Max Lift and Dump - 30 inches
Turning radius from center - rear of machine - 58.3 inches
Turn radius from center - incl. Bucket - 101.5 inches
Wheelbase - 4.6 feet in
Bucket Pin Height - Maximum Lift Height - 10.8 Feet
Height - Cab Top - 6.9 Feet in
Length - Without Bucket - 122.8 Inches
Length - with bucket on the ground - 150.9 inches
Maximum total height - 162 inches
Bucket Finger Height - Carry Position - 7.8 inches
Ground clearance at maximum lift and unload - 97.9
Departure angle - 26 degrees
Maximum angle of dumping - 51 degrees
A-pillar angle - maximum height - 83 degrees
Turn radius from center - rear - 70.7 inches
Turning radius from center - hitch - 57.1 inches
Turning radius from center - bucket - 89.1 inches
Maximum reach - with weapons in parallel - 50 inches
Pin Bucket Lug - Maximum Rise - 14.7 Inches
Achieve - maximum lift / drop - 30.1 inches
Width of the car over tires - 66 inches
Bumper Lug - Rear Axle - 42.8 inches
Choose SKID STEER LOADER 272C section:
Specifications
engine
The number of cylinders - 4
Engine make - 2236
Engine Model - 3044C DIT
Gross Power - 94 HP
Net power - 90hp
Measured Power @ - 2500 rpm
Displacement - 201cu in
Hole Diameter - 3.7 inches
4.7 inch travel
Gross Power - SAE J1995 - 94 HP
Engine Model - Cat C3.4 DIT
Engine power - ISO 14396 - 93 hp
Net Power - EEC 80/1269 - 91 HP
Net Power - ISO 9249 EEC - 91 HP
Net Power - SAE 1349 - 90 HP
Flywheel net power - 90hp
Operational
Operating Weight - 8,292 lbs
Fuel capacity - 26gal
Cooling system capacity - 3.7 gallons
Engine oil volume - 2.6gal
Hydraulic Volume - 15 Gallons
The amount of fluid for the box - each side - 2.9 g
Top speed - 7.2 mph
Operating voltage - 12 V
The amplifier from the generator - 90 amperes
Power train
Forward Speed - 7.2 miles per hour
Reverse Speed - 7.2 Mph
Speed reverse - 2-speed - 10 mph
Forward Speed - 2-Speed - 10 Mph
XDP Speed Option - with tires - 6 mph
Optional XDP Speed - with VTS Tracks - 4.7 mph
Weights
Operating Weight - 8362 lbs.
Loader
Breakout Force - 7315
Nominal Workload - 3,250 lbs
Tipping angle - 6500 degrees
Bucket Capacity - 0.6yd3
Hydraulic system
Hydraulic flow (1) - standard
Hydraulic power - 42.8 hp
Loader maximum hydraulic flow 33 gallons / min
Loader Maximum Hydraulic Pressure - 4061 psi
Loader Hydraulic Pressure - 3335 psi
Loader Hydraulic Flow - 22 gallons / min
Hydraulic Flow (2) - High Flow XPS
Hydraulic
Pump productivity - 22 gal / min
Pressure relief valve - 3335 psi Inch
Dimensions
Length with Bucket - 12.5 Feet in
Tire Width - 5.5 Feet in
Height to Cab Top - 6.83 Feet in
Wheelbase - 4.5 feet in
Ground clearance - 8.81 inches
Length Without Bucket - 10.71 Feet In
Ground clearance in Max Lift and Dump - 8.16 feet in
Get to Max Lift and Dump - 30 inches
Performance characteristics
Nominal working capacity with optional counterweight - 3,480 pounds
6500 lb Tipping Load
Breakout Force - Tilt Cylinder - 7315 lbs
3250 lbs nominal working capacity
Service replenishment options
Cooling System - 3.7gal
Fuel tank - 26gal
Hydraulic tank - 11 gal
Crankcase - 2.6gal
Hydraulic system - 15 gal
Chain Box - Each Side - 2.9 gal
Taxi
ROPS - SAE J1040 MAY94, ISO 3471: 1994
FOPS - SAE J1043 SEPT87, ISO 3449: 1992 Level I
FOPS Level II - SAE J231 JAN81, ISO 3449: 1992 Level II