Caterpillar SKID STEER LOADER 262C - catalog of spare parts
Dimensions
Bucket Length - 12.1 Feet in
Length without bucket - 10.3 feet in
Tire Width - 5.5 Feet in
Height to Cab Top - 6.9 Feet in
Ground clearance at Max Lift and Dump - 8.1 feet per
Wheelbase - 4.1 feet in
Ground clearance - 8.8 inches
Get to Max Lift and Dump - 30.7 inches
Turning radius from center - rear of car - 56.8 inches
Turn radius from center - incl. Bucket - 97.8 inches
Wheelbase - 4.1 feet in
Bucket Finger Height - Maximum Lifting Height - 10.6 Feet
Height - Cab Top - 6.9 Feet in
Length - Without Bucket - 117 Inches
Length - with bucket on the ground - 145 inches
Maximum total height - 160.4 inches
Bucket Finger Height - Carry Position - 7.8 inches
Clearance at maximum lift and unload - 96.4 inches
Departure angle - 26 degrees
Maximum angle of dumping - 50 degrees
Rear Upright Angle - Maximum Height - 85 degrees
Turning radius from the center - rear - 68.1 inches
Center Turn Radius - Coupling - 54.6 inches
Center Turn Radius - Bucket - 85.3 inches
Maximum reach - with weapons in parallel - 50.5 inches
Pin Bucket Lug - Maximum Rise - 14.7 Inches
Achieve - Maximum Rise / Drop - 30.7 inches
Width of the car over tires - 66 inches
Bumper Lug - Rear Axle - 42.8 inches
Choose SKID STEER LOADER 262C section:
Specifications
engine
The number of cylinders - 4
Engine make - 2236
Engine Model - 3044C DIT
Gross Power - 84 HP
Net power - 82 hp
Measured Power @ - 2500 rpm
Displacement - 201cu in
Hole Diameter - 3.7 inches
4.7 inch travel
Gross Power - SAE J1995 - 84 HP
Engine Model - Cat C3.4 DIT
Engine power - ISO 14396 - 83 hp
Net Power - EEC 80/1269 - 83 HP
Net Power - ISO 9249 EEC - 83 HP
Net Power - SAE 1349 - 82 HP
Flywheel net power - 82 hp
Operational
Operational weight - 7968 pounds
Fuel capacity - 26gal
Cooling system capacity - 3.7 gallons
Engine oil volume - 2.6gal
Hydraulic Volume - 15 Gallons
The amount of fluid for the box - each side - 2.6 g
Top Speed - 7.7 mph
Operating voltage - 12 V
The amplifier from the generator - 90 amperes
Power train
Forward Speed - 7.7 mph
Reverse Speed - 7.7 mph
Speed reverse - 2-speed choice - 12 mph
Forward Speed - 2-Speed - 12 Mph
XDP Speed Option - With Tires - 6.5 mph
Optional XDP Speed - with VTS tracks - 4.8 mph
Weights
Working Weight - 7,968 pounds
Loader
Breakout Force - 7315
Nominal Workload - 2,700 lbs
Tipping angle - 5400 degrees
Bucket Capacity - 0.6yd3
Hydraulic system
Hydraulic flow (1) - standard
Hydraulic power - 42.8 hp
Loader maximum hydraulic flow 33 gallons / min
Loader Maximum Hydraulic Pressure - 4061 psi
Loader Hydraulic Pressure - 3335 psi
Loader Hydraulic Flow - 22 gallons / min
Hydraulic Flow (2) - High Flow XPS
Hydraulic
Pump performance - 22gal / min
Pressure relief valve - 3335psi
Dimensions
Length with Bucket - 12.08 Feet in
Tire Width - 5.5 Feet in
Height to Cab Top - 6.83 Feet in
Wheelbase - 4.07 feet in
Ground clearance - 8.81 inches
Length without Bucket - 10.25 Feet in
Ground clearance at Max Lift and Dump - 8.03 feet per
Get to Max Lift and Dump - 30.7 inches
Performance characteristics
Nominal Working Capacity with Extra Counterweight - 2,945 lbs
5400 lb Tipping Load
Breakout Force - Tilt Cylinder - 7315 lbs
Nominal Working Capacity - 2,700 pounds
Service replenishment options
Cooling System - 3.7gal
Fuel tank - 26gal
Hydraulic tank - 11 gal
Crankcase - 2.6gal
Hydraulic system - 15 gal
Chain Box - Each Side - 2.6gal
Taxi
ROPS - SAE J1040 MAY94, ISO 3471: 1994
FOPS - SAE J1043 SEPT87, ISO 3449: 1992 Level I
FOPS Level II - SAE J231 JAN81, ISO 3449: 1992 Level II