Caterpillar SKID STEER LOADER 259D - catalog of spare parts
Dimensions
Dump angle - 52 degrees
Total Track Length - 6.6 Feet in
Length with Bucket - 11.5 Feet in
Length without bucket - 9.1 feet in
Total height - 12.9 feet in
Height to Cab Top - 7 Feet - Ground Clearance - 8.9 Inches
Ground clearance at Max Lift and Dump - 7.5 feet in
Reach in Max Lift and Dump - 2 feet in
Turn radius from center - rear of car - 61.5 inches
Bucket Pin Height - Maximum Lifting Height - 10.1 Feet
Height - Cab Top - 7 ft.
Total Length - Track - 78.7 inches
Length - Track on the ground - 59 inches
Length - Without Bucket - 108.9 Inches
Length - with bucket on the ground - 137.3 inches
Maximum total height - 154.1 inches
Bucket Finger Height - Carry Position - 7.8 inches
Ground clearance at maximum lift and unload - 89.9 inches
Departure angle - 35 degrees
Maximum angle of dumping - 52 degrees
Rear Upright Angle - Maximum Height - 87 degrees
Pin Bucket Lug - Maximum Rise - 9.4 Inches
Achieve - Maximum Rise / Drop - 23.9 inches
Vehicle Width (400 mm / 15.7 in tracks) - 69 inches
Turn radius from center - rear of car - 61.5 inches
Center Turn Radius - Clutch - 54.8in
Maximum reach - with arms parallel to the ground - 51.4 inches
Center Turn Radius - Bucket - 86 Inches
Vehicle Width (320 mm / 12.6 in tracks) - 66 inches
Chassis
The length of the path on earth is 11.44 feet in
Choose SKID STEER LOADER 259D section:
Specifications
engine
Engine make - DIT
Engine Model - Cat C3.3B
Gross Power - 74.3 HP
Net power - 73.2 hp
Peak Torque - 195.5 lb ft
Measured Torque @ - 1,500 rpm
Displacement - 203cu per
Hole Diameter - 3.7 inches
4.7 inch travel
Net Power - ISO 9249 - 73.9 HP
Gross Power - SAE J1995 - 74.3 HP
Engine Model - Cat C3.3B DIT (Turbo)
Net Power - SAE 1349 - 73.2 HP
Peak Torque - 1,500 rpm - SAE J1995 - 195 lb-ft
Operational
Operating Weight - 8847.2 lbs
27.8 gallon fuel tank capacity
Cooling system capacity - 3.7 gallons
Engine oil capacity - 3gal
Hydraulic Capacity 13.3 Gallons
Operating voltage - 12 V
Generator current strength - 80 amperes
Top Speed - Low Range - 6 mph
Max. Speed - High Range - 8.6 mph
Power train
Speed - Forward or Reverse - One Speed - 5.9 Miles per Hour
Travel Speed - Forward or Backward - Two speeds - 8.5 miles per hour
Chassis
Ground Contact Area - 1488.1in2
Ground Pressure - 6 psi
The length of the path on earth is 11.5 feet in
Weights
Operating Weight - 8945 pounds
The note
Operating Weight, Performance, and Dimensions, All Based on 75kg (165 lb) Operator Weight, All Fluids, Two-Speed, OROPS, 1676 mm (66 inches) Dirt Trap, 320 mm (12.6 in) Track Lines, Two-Flange Front Guide / Single flange rear tensioner, standard hydraulic flow system, seat with mechanical suspension, optional counterweights are not provided, and quick-release coupling with manual transmission (unless otherwise specified).
Working weight - 320 mm / 12.6 in tracks - 8846 pounds
Operating Weight - 400 mm / 15.7 in Track - 8945 lbs.
Loader
Tipping Load - 5,800.4 lbs.
Breakout Force - 5035.4 lbs
Workload - 2899.1 lbs.
Hydraulic system
Hydraulic Flow - Standard - Loader Hydraulic Pressure - 3335 psi
Hydraulic flow - Standard - Loader hydraulic flow - 20 gal / min
Hydraulic flow - Standard - Hydraulic power (rated) - 39 hp
Hydraulic flow - high flow rate - hydraulic power (calculated) - 58 hp
Hydraulic Flow - High Flow - Loader Hydraulic Pressure - 3335 psi
Hydraulic flow - high flow rate - loader hydraulic flow - 30 gal / min
Hydraulic
Pump flow rate - 20.1 gal / min
Pressure Relief Valve - 3335.9 psi
Dimensions
Height to Cab Top - 6.93 Feet in
Ground clearance - 8.9i
Ground clearance at Max Lift and Dump - 7.5 feet in
Reach in Max Lift and Dump - 2 feet in