Caterpillar SKID STEER LOADER 259B3 - catalog of spare parts
Dimensions
Width above Caterpillars - 5.8 Feet in
Length with Bucket - 11.3 Feet in
Length without bucket - 9 feet in
Height to Cab Top - 6.6 ft.
Ground clearance - 9 inches
Clearance at Max Lift and Dump - 7.4 feet
Reach at Max Lift and Dump - 2.5 ft.
Turning radius from the center - behind the car - 58 inches
Turn radius from center - incl. Bucket - 85.6 inches
Bucket Finger Height - Maximum Lifting Height - 10 ft.
Height - Cab Top - 6.5 Feet in
Total track length - 79 inches
Reach the Lift / Dump Maximum - 29in
Vehicle Width - 66 Inches
Length - Track on the ground - 59 inches
Length - Without Bucket - 107 Inches
Length - With Bucket On Ground - 135 Inches
Maximum total height - 152 inches
Bucket Finger Height - Carry Position - 8 Inches
Clearance at maximum lift and unload - 88 inches
Departure angle - 35 degrees
Maximum discharge angle - 49.5 degrees
Rear Upright Angle - Maximum Height - 87 degrees
Rotate Radius From Center - Rear - 58 Inches
Rotate Radius From Center - Coupling - 55in
Rotate Center Radius - Bucket - 86 Inches
Maximum reach - with weapons in parallel - 53in
Chassis
The length of the path on earth is 4.91 feet in
Choose SKID STEER LOADER 259B3 section:
Specifications
engine
Engine make - 2236
Engine Model - C3.4 DIT
Gross Power - 74 HP
Net power - 71 hp
Displacement - 201cu in
Hole Diameter - 3.7 inches
4.7 inch travel
Gross Power - SAE J1995 - 74 HP
Engine Model - Cat C3.4T
Net Power - SAE 1349 - 71 HP
Operational
Working Weight - 9,226.4 lbs
22.2 gallon fuel tank capacity
Cooling system capacity - 2.7 gal
Engine oil capacity - 2.4gal
Hydraulic Capacity 14.6 Gallons
Operating voltage - 12 V
The amplifier from the generator - 90 amperes
Max. Speed - Low Range - 5.9 mph
Top Speed - High Range - 8.5 Mph
Power train
Forward Speed - 2 speeds - 8.5 miles per hour
Reverse Speed - 2 speeds - 8.5 miles per hour
5.9 mph forward
Speed Backtrack - 5.9 mph
Chassis
Land Contact Area - 1848in2
Ground Pressure - 5 psi
The length of the path on earth is 5 feet in
Track Width - 15.8 inches
Weights
Operating Weight - 8934 lbs.
Loader
Breakout Force - 4508.5 lbs
Workload - 2,949.8 pounds
Tipping angle - 5899.6 degrees
Hydraulic system
Hydraulic flow (1) - standard
Hydraulic power - 42.8 hp
Loader Hydraulic Pressure - 3335 psi
Hydraulic Flow (2) - High Flow
Hydraulic power - Estimated - 60.3 hp
Loader hydraulic flow (1) - 22 gal / min
Loader Hydraulic Flow (2) - 31 gallons / min
Hydraulic
Pump flow rate - 22 gal / min
Pressure relief valve - 3335 psi Inch
Dimensions
Width above Caterpillars - 5.76 Feet in
Height to Cab Top - 6.52 Feet
Ground clearance - 9 inches
Ground clearance at Max Lift and Dump - 7.36 feet in
Reach at Max Lift and Dump - 2.43 ft. In
Performance characteristics
Rated Operating Power - 50% Tipping Load - 2,950 lbs.
Nominal Operating Power - 35% Tipping Load - 065 lbs
Land Contact Area - 1495in2
Ground Pressure - 6 psi
Nominal Working Capacity with Optional Counterweight - 3,000 lbs.
Tipping Load - 5,900 lbs.
Breakout Force - Tilt Cylinder - 4508 lbs
Service replenishment options
Cooling system - 2.6gal
Fuel tank - 22.2 gal
Hydraulic Tank - 9.2 Gallons
Crankcase - 2.4gal
Hydraulic system - 14.5 gal
Taxi
ROPS - SAE J1040 MAY94, ISO 3471: 1994
FOPS - SAE J1043 SEPT87, ISO 3449: 1992 Level I
FOPS Level II - SAE J231 JAN81, ISO 3449: 1992 Level II