Caterpillar SKID STEER LOADER 252B3 - catalog of spare parts
Dimensions
Length with Bucket - 11.9 Feet in
Length without bucket - 9.6 feet in
Tire Width - 6.1 Feet in
Height to Cab Top - 6.8 Feet in
Ground clearance at Max Lift and Dump - 8 ft.
Wheelbase - 4.1 feet in
Ground clearance - 7.7 inches
Get to Max Lift and Dump - 32.7 inches
Turning radius from the center - at the rear of the car - 66.2 inches
Turn radius from center - incl. Bucket - 85.4 inches
Wheelbase - 4 feet per
Bucket Pin Height - Maximum Lifting Height - 10.5 Feet
Height - Cab Top - 6.9 Feet in
Length - without bucket - 114 inches
Length - with bucket on the ground - 142 inches
Maximum total height - 160 inches
Bucket Finger Height - Carry Position - 8.4 inches
Clearance at maximum lift and unload - 95 inches
Departure angle - 26.4 degrees
Maximum angle of dumping - 51 degrees
Rear Upright Angle - Maximum Height - 88 degrees
Rotate Radius From Center - Back - 66 Inches
Rotate Radius From Center - Coupling - 54in
Rotate Radius From Center - Bucket - 85 Inches
Maximum reach - with weapons in parallel - 50 inches
Pin Bucket Lug - Maximum Rise - 13.7 Inches
Achieve - maximum lift / drop - 33 inches
The width of the car over the tires - 72 inches
Bumper Lug - Rear Axle - 41 Inch
Choose SKID STEER LOADER 252B3 section:
Specifications
engine
Engine make - 2236
Engine Model - C3.4DIT
Gross Power - 74 HP
Net power - 71 hp
Displacement - 201cu in
Hole Diameter - 3.7 inches
4.7 inch travel
Gross Power - SAE J1995 - 74 HP
Engine Model - Cat C3.4 DIT
Net Power - ISO 9249 EEC - 71 HP
Net Power - SAE 1349 - 71 HP
Flywheel net power - 71 hp
Operational
Operating Weight - 7861 lbs
23.8 gallon fuel tank capacity
Cooling system capacity - 2.7 gal
Engine oil volume - 2.4gal
Hydraulic system capacity - 14.1 gallons
The volume of fluid for the box - each side - 2.2gal
Working speed - 7.4 mph
Top Speed - 11.1 mph
Operating voltage - 12 V
The amplifier from the generator - 90 amperes
Power train
Forward Speed - 7.4 mph
Travel Speed Reverse - 7.4 mph
Speed reverse - 2-speed - 11.1 mph
Forward Speed - 2-Speed - 11.1 mph
Weights
Working Weight - 7,861 lbs.
Loader
Strength - 5508
Nominal Workload - 2650 lbs
Tipping angle - 5300 degrees
Hydraulic system
Hydraulic power - 42.8 hp
Loader Hydraulic Pressure - 3335 psi
Loader Hydraulic Flow - 22 gallons / min
Hydraulic flow - standard
Hydraulic
Pump productivity - 22 gal / min
Pressure relief valve - 3335 psi Inch
Dimensions
Length with Bucket - 11.87 Feet in
Tire Width - 6.01 Feet in
Height to Cab Top - 6.77 Feet in
Wheelbase - 4.03 feet in
Ground clearance - 7.7 inches
Length without bucket - 9.52 feet in
Ground clearance in Max Lift and Dump - 7.95 feet in
Reach for Max Lift and Dump - 32.64 inches
Performance characteristics
Nominal Working Capacity with Extra Counterweight - 2,700 lbs
Tipping Load - 5,300 pounds
Breakout Force - Tilt Cylinder - 5508 lbs
Nominal Capacity 2650 lbs
Service replenishment options
Cooling system - 2.6gal
Fuel Tank - 23.8 Gallons
Hydraulic Tank - 9.2 Gallons
Crankcase - 2.4gal
Hydraulic system - 14 gal
Chain Box - Each Side - 2.1gal
Taxi
ROPS - SAE J1040 MAY94, ISO 3471: 1994
FOPS - SAE J1043 SEPT87, ISO 3449: 1992 Level I
FOPS Level II - SAE J231 JAN81, ISO 3449: 1992 Level II