Caterpillar SKID STEER LOADER 252 - catalog of spare parts
Dimensions
Length with Bucket - 11.9 Feet in
Length without bucket - 9.6 feet in
Tire Width - 6.1 Feet in
Height to Cab Top - 6.9 Feet in
Ground clearance at Max Lift and Dump - 8 ft.
Wheelbase - 4.1 feet in
Ground clearance - 9 inches
Get to Max Lift and Dump - 30.8 inches
Turn radius from center - incl. Bucket - 89.2in
Wheelbase - 4.1 feet in
Bucket Pin Height - Maximum Lifting Height - 10.7 Feet
Height - Cab Top - 6.9 Feet in
Length - without bucket - 114.3 inches
Length - with bucket on the ground - 142.4 inches
Maximum total height - 161 inches
Bucket Finger Height - Carry Position - 9.6 Inches
Ground clearance at maximum lift and unload - 98.2 inches
Achieve - Maximum Rise / Drop - 32.5 inches
The width of the car over the tires - 72 inches
Bumper protrusion - rear axle - 41.1 inches
Choose SKID STEER LOADER 252 section:
Specifications
engine
The number of cylinders - 4
Engine make - 2236
Engine Model - 3034
Gross Power - 63 HP
Net power - 59hp
Measured Power @ - 2600 rpm
Displacement - 183cu in
Hole - 3.9 inches
4 inch travel
Engine Model - Cat 3034C
Flywheel net power - 59hp
Operational
3535 lbs operating weight
23.8 gallon fuel tank capacity
Hydraulic system capacity - 14.1 gallons
Working speed - 7.6 mph
Top Speed - 7.6 mph
Weights
Operating Weight - 7,615 pounds
Loader
Nominal Workload - 2,250 lbs
Tipping angle - 4733.3 degrees
Bucket Capacity - 0.6yd3
Hydraulic system
Loader Hydraulic Pressure - 3,300 psi
Loader Hydraulic Flow - 22 gallons / min
Hydraulic Flow - Standard Flow
Hydraulic
Pump productivity - 22 gal / min
Dimensions
Length with Bucket - 11.87 Feet in
Tire Width - 6.01 Feet in
Height to Cab Top - 6.83 Feet in
Wheelbase - 4.03 feet in
Ground clearance - 9 inches
Length without bucket - 9.55 feet in
Ground clearance in Max Lift and Dump - 7.99 feet in
Get to Max Lift and Dump - 30.71 inches
Operational characteristics
Nominal Working Capacity with Extra Counterweight - 2,300 lbs
Tipping Load - 4,500 lbs
Breakout Force - Tilt Cylinder - 5212 lbs
Breakout Force - Lift Cylinder - 5020 lbs
Nominal Capacity 2250 lbs
Service replenishment options
Cooling system - 2.6gal
Fuel Tank - 23.8 Gallons
Hydraulic Tank - 9.2 Gallons
Crankcase - 1.8gal
Hydraulic system - 14 gal
Chain Box - Each Side - 2.1gal
Taxi
ROPS - SAE J1040 MAY94 and ISO3471: 1994
FOPS - SAEJ / ISO 3449 APR98 Level I and ISO3449: 1992 Level I
FOPS Level II - SAEJ / ISO 3449 APR 98 Level II and ISO 3449: 1992 Level II (optional)