Caterpillar SKID STEER LOADER 247B3 - catalog of spare parts
Dimensions
Width Over Caterpillars - 5.5 Feet in
Length with Bucket - 10.8 Feet in
Length without bucket - 8.3 feet in
Height to Cab Top - 6.6 ft.
Ground clearance - 10 inches
Ground clearance at Max Lift and Dump - 7.1 feet in
Reach at Max Lift and Dump - 2.1 feet in
Turning radius from center - rear of machine - 54.3 inches
Turn radius from center - incl. Bucket - 82.5 inches
Bucket Finger Height - Maximum Lifting Height - 9.4 Feet
Height - Cab Top - 6.5 Feet in
Total Length - Track - 75 Inches
Reach the maximum Lift / Dump - 25 inches
Vehicle Width - 66 Inches
Length - Track on the ground - 59 inches
Length - Without Bucket - 99 Inches
Length - with bucket on the ground - 129 inches
Maximum total height - 150 inches
Bucket Finger Height - Carry Position - 8.7 Inches
Ground clearance at maximum lift and unload - 84 inches
Departure angle - 41 degrees
Maximum angle of dumping - 40 degrees
Rear Upright Angle - Maximum Height 82 Degrees
Turn radius from center - rear - 54 inches
Rotate Radius From Center - Coupler - 52in
Rotate Radius From Center - Bucket - 82 Inches
Maximum Coverage - With Parallel Weapons - 53in
Chassis
The length of the path on earth is 4.92 feet in
Choose SKID STEER LOADER 247B3 section:
Specifications
engine
Engine make - 2236
Engine Model - C2.2T
Gross Power - 62 HP
Net power - 56 hp
Displacement - 134cu per
Hole Diameter - 3.3 Inches
Stroke - 3.9in
Gross Power - SAE J1995 - 62 HP
Engine Model - Cat C2.2 T
Net Power - ISO 9249 EEC - 56 HP
Net Power - SAE 1349 - 56 HP
Operational
Working Weight - 6,997 lbs.
The capacity of the fuel tank is 17.2 gal
Cooling system capacity - 2.7 gal
Engine oil capacity - 2.7 gal
Hydraulic Capacity 14.6 Gallons
Operating voltage - 12 V
Generator current strength - 85 amperes
Top Speed - Low Range - 7 Mph
Power train
Forward Speed - 7 Mph
Reverse Speed - 7 Mph
Chassis
Land Contact Area - 1770in2
Ground Pressure - 4psi
The length of the path on earth is 5 feet in
Weights
Working Weight - 6,997 lbs.
Loader
Breakout Force - 4060 lbs
Workload - 2149.6 pounds
Tipping angle - 4299.1 degrees
Hydraulic system
Hydraulic power - 31 hp
Loader Hydraulic Pressure - 3335 psi
Loader hydraulic flow - 16 gallons / min
Hydraulic flow - standard
Hydraulic
Pump flow rate - 16.2 gal / min
Pressure relief valve - 3335 psi Inch
Dimensions
Width Over Caterpillars - 5.5 Feet in
Height to Cab Top - 6.53 ft.
Ground clearance - 10 inches
Ground clearance in Max Lift and Dump - 7.01 feet in
Reach at Max Lift and Dump - 2.06 feet in
Operational characteristics
Rated Operational Power - 50% Tipping Load - 2,150 lbs.
Rated Operational Power - 35% Tipping Load - 1,505 lbs
Land Contact Area - 1770in2
Ground Pressure - 4 psi
Tipping Load - 4,300 pounds
Breakout Force - Tilt Cylinder - 4060 lbs
Service replenishment options
Cooling system - 2.6gal
Fuel tank - 17 gal
Hydraulic Tank - 9.2 Gallons
Crankcase - 2.6gal
Hydraulic system - 14.5 gal
Taxi
ROPS - SAE J1040 MAY94, ISO 3471: 1994
FOPS - SAE J1043 SEPT87, ISO 3449: 1992 Level I
FOPS Level II - SAE J231 JAN81, ISO 3449: 1992 Level II