Caterpillar SKID STEER LOADER 246C - catalog of spare parts
Dimensions
Length with Bucket - 12.2 Feet in
Length without bucket - 10.3 feet in
Tire Width - 5.5 Feet in
Height to Cab Top - 6.9 Feet in
Ground clearance at Max Lift and Dump - 8 ft.
Wheelbase - 4.1 feet in
Ground clearance - 8.8 inches
Get to the Max Lift and Dump - 23.6 inches
Turning radius from center - rear of machine - 58.5 inches
Turn radius from center - incl. Bucket - 94.9 inches
Wheelbase - 4.1 feet in
Bucket Finger Height - Maximum Lifting Height - 10.3 Feet
Height - Cab Top - 6.9 Feet in
Length - Without Bucket - 117.2 Inches
Length - with bucket on the ground - 145.3 inches
Maximum total height - 157.4 inches
Bucket Finger Height - Carry Position - 7.8 inches
Ground clearance at maximum lift and unload - 95.4 inches
Departure angle - 26 degrees
Maximum angle of dumping - 40 degrees
Rear Upright Angle - Maximum Height - 85 degrees
Turning radius from the center - rear - 68.1 inches
Center Turn Radius - Coupling - 54.6 inches
Center Turn Radius - Bucket - 85.3 inches
Maximum reach - with parallel arms - 54.6 inches
Achieve - Maximum Lift / Drop - 23.6 inches
Width of the car over tires - 66 inches
Bumper Lug - Rear Axle - 42.8 inches
Choose SKID STEER LOADER 246C section:
Specifications
engine
The number of cylinders - 4
Engine make - 2236
Engine Model - 3044C DIT
Gross Power - 74 HP
Net power - 73 hp
Measured Power @ - 2500 rpm
Displacement - 201cu in
Hole Diameter - 3.7 inches
4.7 inch travel
Gross Power - SAE J1995 - 74 HP
Engine Model - Cat C3.4 DIT
Net Power - SAE 1349 - 73 HP
Flywheel net power - 73 hp
Operational
Operating Weight - 7381 lbs
Fuel capacity - 26gal
Cooling system capacity - 3.7 gallons
Engine oil volume - 2.6gal
Hydraulic Volume - 15 Gallons
The amount of fluid for the box - each side - 2.6 g
Top Speed - 7.7 mph
Operating voltage - 12 V
The amplifier from the generator - 90 amperes
Power train
Forward Speed - 7.7 mph
Reverse Speed - 7.7 mph
Speed reverse - 2-speed choice - 12 mph
Forward Speed - 2-Speed - 12 Mph
Weights
Operating Weight - 7,480 pounds
Loader
Strength - 7328
Nominal Workload - 2,150 lbs
Tipping angle - 4300 degrees
Bucket Capacity - 0.5yd3
Hydraulic system
Hydraulic flow (1) - standard
Hydraulic power - 42.8 hp
Loader maximum hydraulic flow 33 gallons / min
Loader Maximum Hydraulic Pressure - 4061 psi
Loader Hydraulic Pressure - 3335 psi
Loader Hydraulic Flow - 22 gallons / min
Hydraulic Flow (2) - High Flow XPS
Hydraulic
Pump productivity - 22 gal / min
Pressure relief valve - 3335 psi Inch
Dimensions
Length with Bucket - 12.11 Feet in
Tire Width - 5.5 Feet in
Height to Cab Top - 6.83 Feet in
Wheelbase - 4.07 feet in
Ground clearance - 8.81 inches
Length without Bucket - 10.25 Feet in
Ground clearance in Max Lift and Dump - 7.95 feet in
Get to the Max Lift and Dump - 23.6 inches
Operational characteristics
Nominal Working Capacity with Extra Counterweight - 2,350 lbs
Tipping Load - 4,300 pounds
Breakout Force - Tilt Cylinder - 7,328 lbs
Nominal Capacity 2150 lbs
Service replenishment options
Cooling System - 3.7gal
Fuel tank - 26gal
Hydraulic tank - 11 gal
Crankcase - 2.6gal
Hydraulic system - 15 gal
Chain box - each side - 2.6gal
Taxi
ROPS - SAE J1040 MAY94, ISO 3471: 1994
FOPS - SAE J1043 SEPT87, ISO 3449: 1992 Level I
FOPS Level II - SAE J231 JAN81, ISO 3449: 1992 Level II