Caterpillar SKID STEER LOADER 246 - catalog of spare parts
Dimensions
Length with Bucket - 11.8 Feet in
Length without bucket - 9.2 feet in
Tire Width - 6.1 Feet in
Height to Cab Top - 6.9 Feet in
Ground clearance at Max Lift and Dump - 7.9 feet in
Wheelbase - 3.8 feet in
Ground clearance - 9 inches
Get to Max Lift and Dump - 23.2 inches
Turn radius from center - incl. Bucket - 86.5 inches
Wheelbase - 3.8 feet in
Bucket Pin Height - Maximum Lifting Height - 10.2 Feet
Height - Cab Top - 6.9 Feet in
Length - Without Bucket - 110 Inches
Length - with bucket on the ground - 138 inches
Maximum total height - 156 inches
Bucket Finger Height - Carry Position - 10 Inches
Ground clearance at maximum lift and unload - 94 inches
Achieve - Maximum Rise / Drop - 21 Inches
Width of the car over tires - 66 inches
Bumper Lug - Rear Axle - 41 Inch
Choose SKID STEER LOADER 246 section:
Specifications
engine
The number of cylinders - 4
Engine make - 2236
Engine Model - 3034T
Gross Power - 80 HP
Net power - 74 hp
Measured Power @ - 2600 rpm
Displacement - 183cu in
Aspiration - Turbocharged
Hole - 3.9 inches
4 inch travel
Engine Model - Cat 3034C
Flywheel net power - 55 hp
Operational
Operating Weight - 7,230 pounds
23.8 gallon fuel tank capacity
The volume of the hydraulic system - 13.8 g
Working speed - 7.6 mph
Top Speed - 6.9 Mph
Weights
Working Weight - 7,087 pounds
Loader
Nominal Workload - 2,000 pounds
Tipping angle - 3410 degrees
Bucket Capacity - 0.6yd3
Hydraulic system
Loader Hydraulic Pressure - 3,300 psi
Loader Hydraulic Flow - 22 gallons / min
Hydraulic Flow - Standard Flow
Hydraulic
Pump productivity - 22 gal / min
Dimensions
Length with Bucket - 11.8 Feet in
Tire Width - 6.01 Feet in
Height to Cab Top - 6.87 Feet in
Wheelbase - 3.73 feet in
Ground clearance - 9 inches
Length without Bucket - 9.19 ft in
Ground clearance in Max Lift and Dump - 7.87 feet in
Get to Max Elevator and Dump - 23.12in
Operational characteristics
Nominal Working Capacity with Extra Counterweight - 2,100 lbs.
Tipping Load - 4,000 lbs.
Breakout Force - Tilt Cylinder - 5,259 lbs
Breakout Force - Lift Cylinder - 4,339 lbs.
Nominal Capacity 2000 Lbs
Service replenishment options
Cooling system - 2.6gal
Fuel Tank - 23.8 Gallons
Hydraulic Tank - 9.2 Gallons
Crankcase - 1.8gal
Hydraulic system - 13.7 gal
Chain Box - Each Side - 2 Gal
Taxi
ROPS - SAE J1040 MAY94 and ISO3471: 1994
FOPS - SAEJ / ISO 3449 APR98 Level I and ISO3449: 1992 Level I
FOPS Level II - SAEJ / ISO 3449 APR 98 Level II and ISO 3449: 1992 Level II (optional)