Caterpillar SKID STEER LOADER 242B - catalog of spare parts
Dimensions
Length with Bucket - 11.3 Feet in
Length without bucket - 9.1 feet in
Tire Width - 5.5 Feet in
Height to Cab Top - 6.6 ft.
Ground clearance at Max Lift and Dump - 7.5 feet in
Wheelbase - 3.6 ft. In
Ground clearance - 7 inches
Get to Max Lift and Dump - 30.2 inches
Turning radius from the center - behind the car - 60.9 inches
Turn radius from center - incl. Bucket - 87.5 inches
Wheelbase - 3.6 ft. In
Bucket Finger Height - Maximum Lifting Height - 10 ft.
Height - Cab Top - 6.5 Feet in
Length - Without Bucket - 109 Inches
Length - With Bucket On Ground - 135 Inches
Maximum total height - 155 inches
Bucket Finger Height - Carry Position - 12 Inches
Clearance at maximum lift and unload - 88 inches
Turning radius from center - rear - 60.8 inches
Center Turn Radius - Coupling - 56.5 inches
Rotate Radius From Center - Bucket - 87.4 Inches
Maximum reach - with parallel arms - 48.4 inches
Achieve - maximum lift / reset - 30 inches
Width of the car over tires - 66 inches
Bumper lip - rear axle - 39 inches
Choose SKID STEER LOADER 242B section:
Specifications
engine
Engine make - 2236
Engine Model - 3024C T
Gross Power - 62 HP
Net power - 57.7 hp
Aspiration - Turbocharged
Hole Diameter - 3.3 Inches
Stroke - 3.9in
Gross Power - SAE J1995 - 62 HP
Engine Model - Cat 3024C T
Engine power - ISO 14396 - 61 hp
Net Power - EEC 80/1269 - 57 HP
Net power - ISO 9249 EEC - 57hp
Net Power - SAE 1349 - 57 HP
Flywheel net power - 57h.p.
Operational
Operating Weight - 6,801.3 pounds
The capacity of the fuel tank is 17.2 gal
Cooling system capacity - 2.7 gal
Engine oil volume - 2.2gal
Hydraulic Capacity 14.6 Gallons
The volume of fluid in the box - each side - 1.6gal
Top speed - 7.5 mph
Tire size - 12x16.5 10PR
Operating voltage - 12 V
Generator current strength - 85 amperes
Power train
Forward Speed - 7.4 mph
7.4 mph
Weights
Working Weight - 6802 lbs.
Working Weight - HF - 6,895 pounds
Loader
Tear strength - 4058.8
Nominal Workload - 1999.6 lbs
Tipping angle - 3999.2 degrees
Hydraulic system
Hydraulic flow (1) - standard flow
Maximum hydraulic flow of the loader - 26 gal / min
Loader Hydraulic Pressure - 3335 psi
Loader Hydraulic Flow - 15.6 gallons / min
Hydraulic Flow (2) - High Flow
Hydraulic power (2) - 50.6 hp
Hydraulic power (1) - 30.4 hp
Hydraulic
Pump productivity - 15.9 gal / min
Pressure Relief Valve - 3335.9 psi
Dimensions
Length with Bucket - 11.28 Feet in
Tire Width - 5.5 Feet in
Height to Cab Top - 6.52 Feet
Wheelbase - 3.59 feet in
Ground clearance - 7 inches
Length without Bucket - 9.06 Feet in
Ground clearance at Max Lift and Dump - 7.45 ft.
Get to Max Elevator and Dump - 30.16in
Operational characteristics
2047 lb nominal working capacity with optional counterweight
Tipping Load - 4,000 lbs.
Breakout Force - Tilt Cylinder - 4059 lbs
Breakout Force - Lift Cylinder - 3841 lbs.
Nominal Capacity 2000 Lbs
Breakout Force - Lift Cylinder (HF) - 3818 lbs
Service replenishment options
Cooling system - 2.6gal
Fuel tank - 17 gal
Hydraulic Tank - 9.2 Gallons
Crankcase - 2.1gal
Hydraulic system - 14.5 gal
Chain Box - Each Side - 1.6 gal
Taxi
ROPS - SAE J1040 MAY94 and ISO3471: 1994
FOPS - SAEJ / ISO 3449 APR98 Level I and ISO3449: 1992 Level I
FOPS Level II - SAEJ / ISO 3449 APR 98 Level II and ISO 3449: 1992 Level II (optional)