Caterpillar SKID STEER LOADER 242 - catalog of spare parts
Dimensions
Length with Bucket - 11.3 Feet in
Length without bucket - 9.2 feet in
Tire Width - 5.1 Feet in
Height to Cab Top - 6.6 ft.
Ground clearance at Max Lift and Dump - 7.5 feet in
Wheelbase - 3.8 feet in
Ground clearance - 7 inches
Get to Max Lift and Dump - 30.2 inches
Turn radius from center - incl. Bucket - 88.8 inches
Wheelbase - 3.6 ft. In
Bucket Finger Height - Maximum Lifting Height - 10 ft.
Height - Cab Top - 6.6 Feet in
Length - Without Bucket - 109.3 inches
Length - with bucket on the ground - 135.3 inches
Maximum total height - 154.6 inches
Bucket Finger Height - Carry Position - 11.8 inches
Ground clearance at maximum lift and unload - 88.2 inches
Achieve - Maximum Rise / Drop - 29.9 inches
Width of the car over tires - 66 inches
Bumper Lug - Rear Axle - 38.9 inches
Choose SKID STEER LOADER 242 section:
Specifications
engine
The number of cylinders - 4
Engine make - 2236
Engine Model - 3034
Gross Power - 58 HP
Net power - 54 hp
Measured Power @ - 2600 rpm
Displacement - 183cu in
Hole - 3.9 inches
4 inch travel
Engine Model - Cat 3034C
Flywheel net power - 54 hp
Operational
Operating Weight - 6931 lbs
The capacity of the fuel tank is 17.2 gal
Hydraulic Capacity 14.6 Gallons
Working speed - 6.9 mph
Top Speed - 6.9 Mph
Weights
Operating Weight - 6,858.5 pounds
Loader
Nominal Workload - 2,000 pounds
Tipping angle - 3770 degrees
Bucket Capacity - 0.6yd3
Hydraulic system
Loader Hydraulic Pressure - 3,300 psi
Loader Hydraulic Flow - 15.1 gallons / min
Hydraulic
Pump productivity - 15.2 gal / min
Dimensions
Length with Bucket - 11.28 Feet in
Tire Width - 5.01 Feet in
Height to Cab Top - 6.52 Feet
Wheelbase - 3.73 feet in
Ground clearance - 7 inches
Length without Bucket - 9.11 Feet in
Ground clearance at Max Lift and Dump - 7.47 ft.
Get to Max Elevator and Dump - 30.16in
Operational characteristics
2047 lb nominal working capacity with optional counterweight
Tipping Load - 4,000 lbs.
Breakout Force - Tilt Cylinder - 4056 lbs
Breakout Force - Lift Cylinder - 3814 lbs.
Nominal Capacity 2000 Lbs
Service replenishment options
Cooling system - 24 gal
Fuel Tank - 18.2 gallons
Hydraulic Tank - 9.2 Gallons
Crankcase - 2.1gal
Hydraulic system - 15.3gal
Chain Box - Each Side - 1.6 gal
Taxi
ROPS - SAE J1040 MAY94 and ISO3471: 1994
FOPS - SAEJ / ISO 3449 APR98 Level I and ISO3449: 1992 Level I
FOPS Level II - SAEJ / ISO 3449 APR 98 Level II and ISO 3449: 1992 Level II (optional)