Caterpillar SKID STEER LOADER 236B - catalog of spare parts
Dimensions
Length with Bucket - 11.6 Feet in
Length without bucket - 9.2 feet in
Tire Width - 5.5 Feet in
Height to Cab Top - 6.9 Feet in
Ground clearance at Max Lift and Dump - 7.9 feet in
Wheelbase - 3.8 feet in
Ground clearance - 9.3 inches
Get to Max Lift and Dump - 21.3 inches
Turn radius from center - rear of car - 63.9 inches
Turn radius from center - incl. Bucket - 82.6 inches
Wheelbase - 3.8 feet in
Bucket Pin Height - Maximum Lifting Height - 10.2 Feet
Height - Cab Top - 6.9 Feet in
Length - Without Bucket - 110 Inches
Length - with bucket on the ground - 138 inches
Maximum total height - 156 inches
Bucket Finger Height - Carry Position - 10 Inches
Ground clearance at maximum lift and unload - 94 inches
Rotate Radius From Center - Rear - 64 Inches
Rotate Radius From Center - Coupler - 52in
Turn the radius from the center - bucket - 83in
Maximum reach - with weapons in parallel - 53in
Achieve - Maximum Rise / Drop - 21 Inches
Width of the car over tires - 66 inches
Bumper Lug - Rear Axle - 41 Inch
Choose SKID STEER LOADER 236B section:
Specifications
engine
Engine make - 2236
Engine Model - 3044C DIT
Gross Power - 73 HP
Net power - 71.1 hp
Aspiration - Turbocharged
Hole Diameter - 3.7 inches
Stroke - 4.7 inches - full power - SAE J1995
73 h.p. - Engine model
Cat 3044C DIT - Engine power - ISO 14396 - 71 HP - Net power - EEC 80/1269 - 71 hp
Net Power - ISO 9249 EEC - 71 HP
Net Power - SAE 1349 - 70hp
Flywheel net power - 70hp
Operational
Operating Weight - 7006.3 lbs
23.8 gallon fuel tank capacity
Cooling system capacity - 2.7 gal
2.7 gallon engine oil
The volume of the hydraulic system - 13.8 g
Fluid volume for the box - each side - 1.9 gal
Top Speed - 7.6 mph
Tire size - 12x16.5 10PR
Operating voltage - 12 V
The amplifier from the generator - 90 amperes
Power train
Forward Speed - 7.6 Mph
Reverse Speed - 7.6 mph
Speed reverse - 2-speed - 11.6 mph
Forward Speed - 2-Speed - 11.6 mph
Weights
Operating Weight - 7,007 pounds
Loader
Strength - 5482.9
Nominal Workload - 1,748.3 lbs
Tipping angle - 3496.6 degrees
Hydraulic system
Hydraulic power - 42.8 hp
Loader Hydraulic Pressure - 3335 psi
Loader Hydraulic Flow - 22 gallons / min
Hydraulic Flow - Standard Flow
Hydraulic
Pump productivity - 22 gal / min
Pressure Relief Valve - 3335.9 psi
Dimensions
Length with Bucket - 11.54 Feet in
Tire Width - 5.5 Feet in
Height to Cab Top - 6.87 Feet in
Wheelbase - 3.73 feet in
Ground clearance - 9.31 inches
Length without Bucket - 9.19 ft in
Ground clearance in Max Lift and Dump - 7.87 feet in
Get to Max Lift and Dump - 21.3 inches
Operational characteristics
Nominal Working Capacity with Extra Counterweight - 1,850 lbs
Tipping Load - 4012 lbs.
Breakout Force - Tilt Cylinder - 5484 lbs.
Breakout Force - Lift Cylinder - 4656.2 lbs.
Nominal Working Capacity - 1,750 lbs
Service replenishment options
Cooling system - 2.6gal
Fuel Tank - 23.8 Gallons
Hydraulic Tank - 9.2 Gallons
Crankcase - 2.6gal
Hydraulic system - 13.7 gal
Chain Box - Each Side - 1.8gal
Taxi
ROPS - SAE J1040 MAY94 and ISO 3471: 1994
FOPS - SAE J / ISO 3449 APR98 Level I and ISO3449: 1992 Level I
FOPS Level II - SAE J / ISO 3449 APR98 Level II and ISO 3449: 1992 Level II (optional)