Caterpillar SKID STEER LOADER 232D - catalog of spare parts
Dimensions
Ground clearance - 0.6 feet in
Wheelbase - 3.5 feet in
Weights
Operating Weight - 6,213 pounds
Power train
Travel Speed - Forward or Reverse - One Speed - 7.6 mph
Travel Speed - Forward or Reverse - Two Speed - 11.1 mph
Air conditioning system
Air conditioning
The air conditioning system on this unit contains the fluorinated greenhouse refrigerant R134a (global warming potential = 1430). The system contains 0.81 kg of refrigerant with a CO2 equivalent of 1.158 metric tons.
Choose SKID STEER LOADER 232D section:
Specifications
engine
Displacement - 134.3 ts per
Hole Diameter - 3.3 Inches
Stroke - 3.9in
Net Power - ISO 9249 - 66.5 HP
Gross Power - SAE J1995 - 67.1 HP
Engineering model
Cat C2.2 CRDI
Net Power - SAE 1349 - 65.8 HP
Peak Torque - 1,500 rpm - SAE J1995 - 153 lb-ft
Flywheel net power - 65.8 hp
The note
* Operating Weight, Performance, and Dimensions for an 75 kg (165 lb) operator, all fluids, single speed, 1524 mm (60 inches) bin, Cat 10 16.5 tires, standard hydraulic flow system, C0 cab (OROPS , static seat)), Battery 880 CCA, quick coupler, lack of self-leveling and additional counterweights (unless otherwise indicated).
Hydraulic system
Hydraulic Flow - Standard - Loader Hydraulic Pressure - 3336 psi
Hydraulic flow - Standard - Loader hydraulic flow - 18 gal / min
Hydraulic flow - Standard - Hydraulic power (rated) - 35.5 hp
Hydraulic flow - high flow rate - hydraulic power (calculated) - 50.9 hp
Hydraulic Flow - High Flow - Maximum Loader Hydraulic Pressure - 3336 psi
Hydraulic Flow - High Flow - Maximum Loader Hydraulic Flow - 26 gallons / min
The note
Operating Weight, Performance and Dimensions, All Based on an 75kg (165 lb) Operator, All Fluids, Single Speed, 1524 mm (60 in), Dirty Bucket, Cat 10 16.5 Tires, Standard Hydraulic Flow System, Cabin C0 ( OROPS, static saddle), Battery 880 CCA, quick coupler, without self-leveling and additional counterweights (unless otherwise indicated).
Bucket Pin Height - Maximum Lift Height - 9.9 Feet
Height - Cab Top - 6.7 Feet in
Length - Without Bucket - 99.3 Inches
Length - with bucket on the ground - 127.3 inches
Maximum total height - 150.9 inches
Bucket Finger Height - Carry Position - 8.4 inches
Clearance at maximum lift and unload - 88.7 inches
Departure angle - 27.9 degrees
Maximum discharge angle - 47.4 degrees
A-pillar angle - maximum height 88.2 degrees
Pin Bucket Lug - Maximum Lift - 8.8 Inches
Achieve - Maximum Rise / Drop - 25.7 inches
Turn radius from center - rear of machine - 59.6 inches
Center Turn Radius - Clutch - 43.4in
Maximum reach - with arms parallel to the ground - 49.2 inches
Center Turn Radius - Bucket - 77.8 inches
The width of the car above the tires - 58.9 inches
Bumper protrusion - behind the rear axle - 35.2 inches
Operational characteristics
The note
Operating Weight, Performance and Dimensions, All Based on an 75kg (165 lb) Operator, All Fluids, Single Speed, 1524 mm (60 in), Dirty Bucket, Cat 10 16.5 Tires, Standard Hydraulic Flow System, Cabin C0 ( OROPS, static saddle), Battery 880 CCA, quick coupler, without self-leveling and additional counterweights (unless otherwise indicated).
Nominal Working Capacity with Extra Counterweight - 1950 lbs
Tipping Load - 3,700lb
Breakout Force - Tilt Cylinder - 3984 lbs
Nominal Capacity 1850 lbs
Service replenishment options
Cooling system - 3.2gal
Fuel tank - 15.1 gallons
Hydraulic tank - 9 gal
Crankcase - 2.6gal
Hydraulic system - 11.9 gal
Chain Box - Each Side - 1.8gal
Taxi
ROPS - ISO 3471: 2008
FOPS - ISO 3449: 2005 Level I
FOPS Level II - ISO 3449: 2005 Level II
Noise level
Inside the cab * - 83 dB (A)
External cab ** - 101 dB (A)
Note (1)
Cab and Roll Over Protective Structures (ROPS) are standard in North America and Europe.
Note (2)
* Declared dynamic sound pressure levels of the operator according to ISO 6396: 2008. The measurements were carried out with the doors and windows of the cab closed and at 70% of the maximum speed of rotation of the engine cooling fan. Sound levels may vary at different speeds of the engine cooling fan.
Note (3)
** Indicated sound power level for marked CE configurations when measured in accordance with the test procedure and conditions specified in 2000/14 / EC.