Caterpillar SKID STEER LOADER 232B - catalog of spare parts
Dimensions
Length with Bucket - 11.3 Feet in
Length without bucket - 9.1 feet in
Tire Width 5 ft.
Height to Cab Top - 6.5 Feet in
Clearance at Max Lift and Dump - 7.4 feet
Wheelbase - 3.6 ft. In
Ground clearance - 6 inches
Get to Max Lift and Dump - 30.2 inches
Turning radius from the center - behind the car - 60.9 inches
Turn radius from center - incl. Bucket - 87.5 inches
Wheelbase - 3.6 ft. In
Bucket Finger Height - Maximum Lifting Height - 10 ft.
Height - Cab Top - 6.5 Feet in
Length - Without Bucket - 109 Inches
Length - With Bucket On Ground - 135 Inches
Maximum total height - 153 inches
Bucket Finger Height - Carry Position - 10 Inches
Clearance at maximum lift and unload - 88 inches
Turning radius from center - rear - 60.8 inches
Center Turn Radius - Coupling - 56.5 inches
Rotate Radius From Center - Bucket - 87.4 Inches
Maximum reach - with parallel arms - 48.4 inches
Achieve - maximum lift / reset - 30 inches
Width of the car over tires - 60 inches
Bumper lip - rear axle - 39 inches
Choose SKID STEER LOADER 232B section:
Specifications
engine
Engine make - 2236
Engine Model - 3024C
Gross Power - 52 HP
Net power - 49.7 hp
Hole Diameter - 3.3 Inches
Stroke - 3.9in
Gross Power - SAE J1995 - 52 HP
Engine Model - Cat 3024C
Engine power - ISO 14396 - 51 hp
Net Power - EEC 80/1269 - 50 HP
Net power - ISO 9249 EEC - 50 hp
Net Power - SAE 1349 - 49 HP
Flywheel net power - 49hp
Operational
Operating Weight - 6,660.2 lbs.
The capacity of the fuel tank is 17.2 gal
Cooling system capacity - 2.7 gal
Engine oil volume - 2.2gal
Hydraulic Capacity 14.6 Gallons
The volume of fluid in the box - each side - 1.6gal
Top Speed - 6.9 Mph
Tire size - 10x16.5 8PR
Operating voltage - 12 V
Generator current strength - 65 amperes
Power train
6.9 mph forward
Reverse Speed - 6.9 mph
Weights
Working Weight - 6,661 lbs.
Loader
Tear strength - 4058.8
Nominal Workload - 1,748.3 lbs
Tipping angle - 3501 degrees
Hydraulic system
Hydraulic flow (1) - standard flow
Hydraulic power - 28.2 hp
Loader Hydraulic Pressure - 3,100 psi
Loader Hydraulic Flow - 15.6 gallons / min
Hydraulic flow (2) - standard
Hydraulic
Pump productivity - 15.9 gal / min
Pressure relief valve - 3103.9 psi. Inch
Dimensions
Length with Bucket - 11.28 Feet in
Tire Width 5 ft.
Height to Cab Top - 6.41 Feet in
Wheelbase - 3.59 feet in
Ground clearance - 6 inches
Length without Bucket - 9.06 Feet in
Ground clearance at Max Lift and Dump - 7.36 feet in
Get to Max Elevator and Dump - 30.16in
Operational characteristics
Nominal Working Capacity with Extra Counterweight - 1,795 lbs
Tipping Load - 3955.1 lbs
Breakout Force - Tilt Cylinder - 4059 lbs
Breakout Force - Lift Cylinder - 3841 lbs.
Nominal Working Capacity - 1,750 lbs
Service replenishment options
Cooling system - 2.6gal
Fuel tank - 17 gal
Hydraulic Tank - 9.2 Gallons
Crankcase - 2.1gal
Hydraulic system - 14.5 gal
Chain Box - Each Side - 1.6 gal
Taxi
ROPS - SAE J1040 MAY94 and ISO3471: 1994
FOPS - SAEJ / ISO 3449 APR98 Level I and ISO3449: 1992 Level I
FOPS Level II - SAEJ / ISO 3449 APR 98 Level II and ISO 3449: 1992 Level II (optional)