Caterpillar SKID STEER LOADER 232 - catalog of spare parts
Dimensions
Length with Bucket - 11.3 Feet in
Length without bucket - 9.1 feet in
Tire Width - 5.1 Feet in
Height to Cab Top - 6.4 Feet in
Ground clearance at Max Lift and Dump - 7.7 feet in
Wheelbase - 3.6 ft. In
Ground clearance - 5.7 inches
Get to Max Lift and Dump - 30.2 inches
Turn radius from center - incl. Bucket - 88.8 inches
Wheelbase - 3.6 ft. In
Bucket Pin Height - Maximum Lift Height - 9.9 Feet
Height - Cab Top - 6.5 Feet in
Length - Without Bucket - 109.3 inches
Length - with bucket on the ground - 135.3 inches
Maximum total height - 153.3 inches
Bucket Finger Height - Carry Position - 9.7 Inches
Clearance at maximum lift and unload - 86.9 inches
Achieve - Maximum Rise / Drop - 28.5 inches
Width of the car over tires - 60 inches
Bumper Lug - Rear Axle - 38.9 inches
Choose SKID STEER LOADER 232 section:
Specifications
engine
The number of cylinders - 4
Engine make - 2236
Engine Model - 3024C
Gross Power - 51 HP
Net power - 48hp
Measured Power @ - 3000 rpm
Displacement - 134cu per
Hole Diameter 3.4 inches
4 inch travel
Engine Model - Cat 3034C
Flywheel net power - 48 hp
Operational
Operating Weight - 6931 lbs
The capacity of the fuel tank is 17.2 gal
Hydraulic Capacity 14.6 Gallons
Working speed - 6.2 mph
Top Speed - 6.2 mph
Weights
Working Weight - 6,739.5 lbs.
Loader
Nominal Workload - 1,750 lbs
Tipping angle - 3633 degrees
Bucket Capacity - 0.6yd3
Hydraulic system
Loader Hydraulic Pressure - 3,100 psi
Loader hydraulic flow - 14.7 gal / min
Hydraulic
Pump productivity - 14.6 gal / min
Dimensions
Length with Bucket - 11.28 Feet in
Tire Width - 5.01 Feet in
Height to Cab Top - 6.4 Feet in
Wheelbase - 3.59 feet in
Ground clearance - 5.7 inches
Length without Bucket - 9.06 Feet in
Ground clearance in Max Lift and Dump - 7.62 feet in
Get to Max Elevator and Dump - 30.16in
Operational characteristics
Nominal Working Capacity with Extra Counterweight - 1,795 lbs
3500 lb Tipping Load
Breakout Force - Tilt Cylinder - 4056 lbs
Breakout Force - Lift Cylinder - 3814 lbs.
Nominal Working Capacity - 1,750 lbs
Service replenishment options
Cooling system - 2.4 gal
Fuel Tank - 18.2 gallons
Hydraulic Tank - 9.2 Gallons
Crankcase - 2.1gal
Hydraulic system - 15.3gal
Chain Box - Each Side - 1.6 gal
Taxi
ROPS - SAE J1040 MAY94 and ISO3471: 1994
FOPS - SAEJ / ISO 3449 APR98 Level I and ISO3449: 1992 Level I
FOPS Level II - SAEJ / ISO 3449 APR 98 Level II and ISO 3449: 1992 Level II (optional)