Caterpillar SKID STEER LOADER 228 - catalog of spare parts
Dimensions
Length with Bucket - 10.7 Feet in
Length without bucket - 8.3 feet in
Tire Width - 5.1 Feet in
Height to Cab Top - 6.4 Feet in
Ground clearance at Max Lift and Dump - 7.2 feet in
Wheelbase - 3.3 feet in
Ground clearance - 8 inches
Reach for Max Lift and Dump - 22.1 inches
Turn radius from center - incl. Bucket - 80.7 inches
Wheelbase - 3.3 feet in
Bucket Finger Height - Maximum Lifting Height - 9.4 Feet
Height - Cab Top - 6.5 Feet in
Length - Without Bucket - 99 Inches
Length - with bucket on the ground - 127 inches
Maximum total height - 146 inches
Bucket Finger Height - Carry Position - 9 Inches
Ground clearance at maximum lift and unload - 84 inches
Achieve - maximum lift / reset - 20 inches
Width of the car over tires - 60 inches
Bumper protrusion - rear axle - 38 inches
Choose SKID STEER LOADER 228 section:
Specifications
engine
The number of cylinders - 4
Engine make - 2236
Engine Model - 3034
Gross Power - 58 HP
Net power - 54 hp
Measured Power @ - 2600 rpm
Displacement - 183cu in
Hole - 3.9 inches
4 inch travel
Engine Model - Cat 3034C
Flywheel net power - 41 hp
Operational
Operating Weight - 6070 pounds
The capacity of the fuel tank is 17.2 gal
Hydraulic Capacity 14.6 Gallons
Working speed - 6.9 mph
Top Speed - 6.9 Mph
Weights
Operating Weight - 5843 lbs.
Loader
Nominal Workload - 1,500 lbs
Tipping angle - 2800 degrees
Bucket Capacity - 0.6yd3
Hydraulic system
Loader Hydraulic Pressure - 3,300 psi
Loader hydraulic flow - 30 gal / min
Hydraulic Flow - Standard Flow
Hydraulic
Pump productivity - 30.2 gal / min
Dimensions
Length with Bucket - 10.61 Feet in
Tire Width - 5.01 Feet in
Height to Cab Top - 6.4 Feet in
Wheelbase - 3.24 feet in
Ground clearance - 8 inches
Length without bucket - 8.27 feet in
Ground clearance at Max Lift and Dump - 7.12 feet in
Get to Max Elevator and Dump - 05.22in
Operational characteristics
Nominal Working Capacity with Extra Counterweight - 1,600 lbs.
Tipping Load - 3,000 lbs.
Breakout Force - Tilt Cylinder - 3907 lbs
Breakout Force - Lift Cylinder - 3,129 lbs.
Nominal Working Capacity - 1,500 lbs.
Service replenishment options
Cooling system - 2.6gal
Fuel tank - 17 gal
Hydraulic Tank - 9.2 Gallons
Crankcase - 1.8gal
Hydraulic system - 14.5 gal
Chain Box - Each Side - 1.6 gal
Taxi
ROPS - SAE J1040 MAY94 and ISO3471: 1994
FOPS - SAEJ / ISO 3449 APR98 Level I and ISO3449: 1992 Level I
FOPS Level II - SAEJ / ISO 3449 APR 98 Level II and ISO 3449: 1992 Level II (optional)