Your region: United States

Caterpillar SKID STEER LOADER 226D - catalog of spare parts

Dimensions

Ground clearance - 0.6 feet in

Wheelbase - 3.5 feet in

The note

Operating Weight, Performance and Dimensions, All Based on an 75kg (165 lb) Operator, All Fluids, Single Speed, 1524 mm (60 in), Dirty Bucket, Cat 10 16.5 Tires, Standard Hydraulic Flow System, Cabin C0 ( OROPS, static saddle), Battery 880 CCA, quick coupler, without self-leveling and additional counterweights (unless otherwise indicated).

Bucket Finger Height - Maximum Lifting Height - 9.3 Feet

Height - Cab Top - 6.7 Feet in

Length - Without Bucket - 99.4 Inches

Length - with bucket on the ground - 127.3 inches

Maximum total height - 143.8 inches

Bucket Finger Height - Carry Position - 8.5 inches

Ground clearance at maximum lift and unload - 81.8 inches

Departure angle - 27.9 degrees

Maximum discharge angle - 46.7 degrees

A-pillar angle - maximum height 88.9 degrees

Achieve - Maximum Rise / Drop - 21 Inches

Turn radius from center - rear of machine - 59.6 inches

Center Turn Radius - Coupling - 43.5 inches

Maximum reach - with arms parallel to the ground - 50.7 inches

Center Turn Radius - Bucket - 77.8 inches

The width of the car above the tires - 58.9 inches

Bumper protrusion - behind the rear axle - 35.2 inches

Choose SKID STEER LOADER 226D section:

Specifications

engine

Displacement - 134.3 ts per

Hole Diameter - 3.3 Inches

Stroke - 3.9in

Net Power - ISO 9249 - 66.5 HP

Gross Power - SAE J1995 - 67.1 HP

Engine Model - Cat C2.2 CRDI

Net Power - SAE 1349 - 65.8 HP

Peak Torque - 1,500 rpm - SAE J1995 - 153 lb-ft

Flywheel net power - 65.8 hp

Power train

Travel Speed ​​- Forward or Reverse - One Speed ​​- 7.6 mph

Travel Speed ​​- Forward or Reverse - Two Speed ​​- 11.1 mph

Weights

Operating Weight - 5,705 lbs

The note

Operating Weight, Performance and Dimensions, All Based on an 75kg (165 lb) Operator, All Fluids, Single Speed, 1524 mm (60 in), Dirty Bucket, Cat 10 16.5 Tires, Standard Hydraulic Flow System, Cabin C0 ( OROPS, static saddle), Battery 880 CCA, quick coupler, without self-leveling and additional counterweights (unless otherwise indicated).

Hydraulic system

Hydraulic Flow - Standard - Loader Hydraulic Pressure - 3336 psi

Hydraulic flow - Standard - Loader hydraulic flow - 18 gal / min

Hydraulic flow - Standard - Hydraulic power (rated) - 35.5 hp

Hydraulic flow - high flow rate - hydraulic power (calculated) - 50.9 hp

Hydraulic Flow - High Flow - Maximum Loader Hydraulic Pressure - 3336 psi

Hydraulic Flow - High Flow - Maximum Loader Hydraulic Flow - 26 gallons / min

Operational characteristics

The note

Operating Weight, Performance and Dimensions, All Based on an 75kg (165 lb) Operator, All Fluids, Single Speed, 1524 mm (60 in), Dirty Bucket, Cat 10 16.5 Tires, Standard Hydraulic Flow System, Cabin C0 ( OROPS, static saddle), Battery 880 CCA, quick coupler, without self-leveling and additional counterweights (unless otherwise indicated).

Nominal Working Capacity with Extra Counterweight - 1,650 lbs

Tipping Load - 3,100 pounds

Breakout Force - Tilt Cylinder - 3983 lbs.

Nominal Working Capacity - 1,550 lbs

Service replenishment options

Cooling system - 3.2gal

Fuel tank - 15.1 gallons

Hydraulic tank - 9 gal

Crankcase - 2.6gal

Hydraulic system - 11.9 gal

Chain Box - Each Side - 1.8gal

Taxi

ROPS - ISO 3471: 2008

FOPS - ISO 3449: 2005 Level I

FOPS Level II - ISO 3449: 2005 Level II

Air conditioning system

Air conditioning

The air conditioning system on this unit contains the fluorinated greenhouse refrigerant R134a (global warming potential = 1430). The system contains 0.81 kg of refrigerant with a CO2 equivalent of 1.158 metric tons.

Noise level

Inside the cab * - 83 dB (A)

External cab ** - 102 dB (A)

Note (1)

Cab and Roll Over Protective Structures (ROPS) are standard in North America and Europe.

Note (2)

* Declared dynamic sound pressure levels of the operator according to ISO 6396: 2008. The measurements were carried out with the doors and windows of the cab closed and at 70% of the maximum speed of rotation of the engine cooling fan. Sound levels may vary at different speeds of the engine cooling fan.

Note (3)

** Indicated sound power level for marked CE configurations when measured in accordance with the test procedure and conditions specified in 2000/14 / EC.