Caterpillar SKID STEER LOADER 226B3 - catalog of spare parts
Dimensions
Length with Bucket - 10.7 Feet in
Length without bucket - 8.3 feet in
Tire Width - 5.1 Feet in
Height to Cab Top - 6.4 Feet in
Ground clearance at Max Lift and Dump - 7.2 feet in
Wheelbase - 3.3 feet in
Ground clearance - 8 inches
Get to Max Lift and Dump - 19.9 inches
Turn radius from center - rear of machine - 59.2 inches
Turn radius from center - incl. Bucket - 76.6 inches
Wheelbase - 3.3 feet in
Bucket Finger Height - Maximum Lifting Height - 9.4 Feet
Height - Cab Top - 6.5 Feet in
Length - Without Bucket - 99 Inches
Length - with bucket on the ground - 127 inches
Maximum total height - 146 inches
Bucket Finger Height - Carry Position - 8 Inches
Clearance at maximum lift and unload - 85.4 inches
Departure angle - 26 degrees
Maximum angle of dumping - 40 degrees
A-pillar angle - maximum height - 81 degrees
Rotate Radius From Center - Rear - 59 Inches
Rotate Radius From Center - Coupling - 47in
Rotate Radius From Center - Bucket - 77 Inches
Maximum reach - with weapons in parallel - 51in
Achieve - maximum lift / reset - 20 inches
Width of the car over tires - 60 inches
Bumper protrusion - rear axle - 38 inches
Choose SKID STEER LOADER 226B3 section:
Specifications
engine
Engine make - 2236
Engine Model - C2.2T
Gross Power - 61 HP
Net power - 56 hp
Displacement - 134cu per
Hole Diameter - 3.3 Inches
Stroke - 3.9in
Gross Power - SAE J1995 - 61 HP
Engine Model - Cat C2.2 T
Net Power - ISO 9249 EEC - 56 HP
Net Power - SAE 1349 - 56 HP
Flywheel net power - 56 hp
Operational
Operating Weight - 5822 lbs
The capacity of the fuel tank is 15.4 gal
Cooling system capacity - 2.7 gal
2.7 gallon engine oil
Hydraulic Capacity 14.6 Gallons
The volume of fluid for the box - each side - 1.6 gal
Working speed - 7.9 mph
Operating voltage - 12 V
Generator current strength - 85 amperes
Power train
7.9 mph forward
Reverse Speed - 7.9 mph
Weights
Operating Weight - 5,822 pounds
Loader
Strength - 4083
Nominal Workload - 1,500 lbs
Tipping angle - 3000 degrees
Hydraulic system
Hydraulic flow (1) - standard
Maximum hydraulic flow of the loader - 27 gal / min
Loader Maximum Hydraulic Pressure - 3335 psi
Loader Hydraulic Pressure - 3335 psi
Hydraulic Flow (2) - High Flow
Hydraulic Power - Estimated - 50.6 HP
Loader hydraulic flow (1) - 16 gal / min
Loader hydraulic flow (2) - 27 gal / min
Hydraulic power (2) - 50.6 hp
Hydraulic power (1) - 31.1 hp
Hydraulic
Pump productivity - 16 gal / min
Pressure relief valve - 3335 psi Inch
Dimensions
Length with Bucket - 10.61 Feet in
Tire Width - 5.01 Feet in
Height to Cab Top - 6.4 Feet in
Wheelbase - 3.24 feet in
Ground clearance - 8 inches
Length without bucket - 8.27 feet in
Ground clearance at Max Lift and Dump - 7.12 feet in
Get to Max Lift and Dump - 19.89in
Operational characteristics
Nominal Working Capacity with Extra Counterweight - 1,600 lbs.
Tipping Load - 3,000 lbs.
Breakout Force - Tilt Cylinder - 4083 lbs.
Nominal Working Capacity - 1,500 lbs.
Service replenishment options
Cooling system - 2.6gal
Fuel tank - 15.4gal
Hydraulic Tank - 9.2 Gallons
Crankcase - 2.6gal
Hydraulic system - 14.5 gal
Chain Box - Each Side - 1.6 gal
Taxi
ROPS - SAE J1040 MAY94, ISO 3471: 1994
FOPS - SAE J1043 SEPT87, ISO 3449: 1992 Level I
FOPS Level II - SAE J231 JAN81, ISO 3449: 1992 Level II