Caterpillar SKID STEER LOADER 216B - catalog of spare parts
Dimensions
Length with Bucket - 10.7 Feet in
Length without bucket - 8.3 feet in
Tire Width - 5.1 Feet in
Height to Cab Top - 6.4 Feet in
Ground clearance at Max Lift and Dump - 7.2 feet in
Wheelbase - 3.3 feet in
Ground clearance - 8 inches
Get to Max Lift and Dump - 19.9 inches
Turning radius from center - rear of machine - 58.5 inches
Turn radius from center - incl. Bucket - 76.4 inches
Wheelbase - 3.3 feet in
Bucket Finger Height - Maximum Lifting Height - 9.4 Feet
Height - Cab Top - 6.5 Feet in
Length - Without Bucket - 99 Inches
Length - with bucket on the ground - 127 inches
Maximum total height - 146 inches
Bucket Finger Height - Carry Position - 9.3 inches
Clearance at maximum lift and unload - 85 inches
Turning radius from center - rear - 58.5 inches
Center Turn Radius - Coupling - 47.2 inches
Turning radius from center - bucket - 76.4 inches
Maximum reach - with weapons in parallel - 50.4 inches
Achieve - maximum lift / reset - 20 inches
Width of the car over tires - 60 inches
Bumper protrusion - rear axle - 38 inches
Choose SKID STEER LOADER 216B section:
Specifications
engine
Engine make - 2236
Engine Model - 3024C
Gross Power - 52 HP
Net power - 49.7 hp
Hole Diameter - 3.3 Inches
Stroke - 3.9in
Gross Power - SAE J1995 - 52 HP
Engine Model - Cat 3024C
Engine power - ISO 14396 - 51 hp
Net Power - EEC 80/1269 - 50 HP
Net power - ISO 9249 EEC - 50 hp
Net Power - SAE 1349 - 49 HP
Flywheel net power - 49hp
Operational
Operating Weight - 5,707.8 lbs.
The capacity of the fuel tank is 17.2 gal
Cooling system capacity - 2.7 gal
Engine oil volume - 2.2gal
Hydraulic Capacity 14.6 Gallons
The volume of fluid for the box - each side - 1.6 gal
Top Speed - 7.8 mph
Tire size - 10x16.5 6PR
Operating voltage - 12 V
Generator current strength - 65 amperes
Power train
7.9 mph forward
Reverse Speed - 7.9 mph
Weights
Operating Weight - 5,709 lbs
Loader
Tear strength - 3785.4
Nominal Workload - 1,400 lbs
Tipping angle - 2799.9 degrees
Hydraulic system
Hydraulic power - 28.2 hp
Loader Hydraulic Pressure - 3,100 psi
Loader Hydraulic Flow - 15.6 gallons / min
Hydraulic Flow - Standard Flow
Hydraulic
Pump productivity - 15.9 gal / min
Pressure relief valve - 3103.9 psi. Inch
Dimensions
Length with Bucket - 10.61 Feet in
Tire Width - 5.01 Feet in
Height to Cab Top - 6.4 Feet in
Wheelbase - 3.24 feet in
Ground clearance - 8 inches
Length without bucket - 8.27 feet in
Ground clearance at Max Lift and Dump - 7.12 feet in
Get to Max Lift and Dump - 19.89in
Operational characteristics
Nominal Working Capacity with Extra Counterweight - 1,500 lbs.
Tipping Load - 2,800 pounds
Breakout Force - Tilt Cylinder - 3,787 lbs
Breakout Force - Lift Cylinder - 3057 lbs
Nominal Working Capacity - 1,400 lbs
Service replenishment options
Cooling system - 2.6gal
Fuel tank - 17 gal
Hydraulic Tank - 9.2 Gallons
Crankcase - 2.1gal
Hydraulic system - 14.5 gal
Chain Box - Each Side - 1.6 gal
Taxi
ROPS - SAE J1040 MAY94 and ISO3471: 1994
FOPS - SAEJ / ISO 3449 APR98 Level I and ISO3449: 1992 Level I
FOPS Level II - SAEJ / ISO 3449 APR 98 Level II and ISO 3449: 1992 Level II (optional)