Caterpillar SKID STEER LOADER 216 - catalog of spare parts
Dimensions
Length with Bucket - 10.9 Feet in
Length without bucket - 8.3 feet in
Tire Width - 6.1 Feet in
Height to Cab Top - 6.4 Feet in
Ground clearance at Max Lift and Dump - 7.2 feet in
Wheelbase - 3.3 feet in
Ground clearance - 7.7 inches
Get to Max Lift and Dump - 21.5 inches
Turn radius from center - incl. Bucket - 79.4 inches
Wheelbase - 3.3 feet in
Bucket Finger Height - Maximum Lifting Height - 9.4 Feet
Height - Cab Top - 6.5 Feet in
Length - Without Bucket - 99 Inches
Length - with bucket on the ground - 127 inches
Maximum total height - 146 inches
Bucket Finger Height - Carry Position - 9.3 inches
Clearance at maximum lift and unload - 85.4 inches
Achieve - maximum lift / reset - 20 inches
Width of the car over tires - 60 inches
Bumper protrusion - rear axle - 38 inches
Choose SKID STEER LOADER 216 section:
Specifications
engine
The number of cylinders - 4
Engine make - 2236
Engine Model - 3024C
Gross Power - 51 HP
Net power - 48hp
Measured Power @ - 3000 rpm
Displacement - 134cu per
Hole Diameter 3.4 inches
Travel - 4 inch
Engine Model - Cat 3024C
Flywheel net power - 48 hp
Operational
Operational weight - 5740 pounds
The capacity of the fuel tank is 17.2 gal
Hydraulic Capacity 14.6 Gallons
Working speed - 7 miles per hour
Top speed - 7 mph
Weights
5,490 lbs. Working weight
Loader
Nominal Workload - 1,400 lbs
Tipping angle - 2600 degrees
Bucket Capacity - 0.5yd3
Hydraulic system
Loader Hydraulic Pressure - 3,100 psi
Loader hydraulic flow - 14.7 gal / min
Hydraulic Flow - Standard Flow
Hydraulic
Pump productivity - 15.2 gal / min
Dimensions
Length with Bucket - 10.88 Feet in
Tire Width - 6.01 Feet in
Height to Cab Top - 6.4 Feet in
Wheelbase - 3.24 feet in
Ground clearance - 7.7 inches
Length without bucket - 8.27 feet in
Ground clearance at Max Lift and Dump - 7.12 feet in
Get to Max Lift and Dump - 21.5 inches
Operational characteristics
Nominal working capacity with additional counterweight - 1500lb
Tipping load - 2800lb
Breakout Force - Tilt Cylinder - 3612lb
Breakout Force - Lift Cylinder - 2873lb
Rated working capacity - 1400lb
Service replenishment options
Cooling system - 2.4 gal
Fuel tank - 17 gal
Hydraulic Tank - 9.2 Gallons
Crankcase - 2.1gal
Hydraulic system - 14.5 gal
Chain Box - Each Side - 1.6 gal
Taxi
ROPS - SAE J1040 MAY94 and ISO3471: 1994
FOPS - SAEJ / ISO 3449 APR98 Level I and ISO3449: 1992 Level I
FOPS Level II - SAEJ / ISO 3449 APR 98 Level II and ISO 3449: 1992 Level II (optional)