Your region: United States

Caterpillar PAVING COMPACTOR CB-64B - catalog of spare parts

 

The CB64B is a vibrating roller weighing 12 metric tons, equipped with 2000 mm drums (79 inches). This high-performance model provides excellent mate density, good visibility and comfort, fuel economy with economical mode and industry-leading water spray. This model can be equipped with a Cat seal monitoring system that provides a display of temperature and a passage counter, as well as data exchange between machines for more efficient operation.

Choose PAVING COMPACTOR CB-64B section:

8T0341 Hex Socket Head Bolts Caterpillar View
0950924 Ring Retaining Caterpillar View
1167471 Puller Minifuse Caterpillar View
8C8451 Hex Head Bolts, Zinc Flake Caterpillar View
4J5477 ORFS Oring Caterpillar View
7X2470 Adapter Caterpillar View
3447219 Seal Caterpillar View
1028803 Kit Receptacle Caterpillar View
3492761 Connection A Caterpillar View
1106349 Fitting As Caterpillar View
3398822 Sensor As Temperature Caterpillar View
1779645 Kit Receptacle Caterpillar View
6I4200 Bolt Caterpillar View
8T4181 Track Bolt Caterpillar View
2954670 Bolt Special Caterpillar View
1313093 Bushing Caterpillar View
1945226 Wire As Caterpillar View
2474928 Washer Caterpillar View
3537717 Cooler Gp Engine Oil Caterpillar View
1789570 Compressor Gp Refrigerant Caterpillar View
3629416 Valve Caterpillar View
3638652 Oring Caterpillar View
1440195 Hose Caterpillar View
1809339 Pin Connector Caterpillar View
6I0260 Bolt Caterpillar View
0311119 Cap As Radiator Caterpillar View
8C3056 Cable Caterpillar View
3684536 Switch As Ro Caterpillar View
6I0839 Bolt Caterpillar View
1532817 Hose Caterpillar View
1347258 Film Information Caterpillar View
0676006 Plug Caterpillar View
4B4863 Washer Caterpillar View
1552256 Kit Connecting Plug Caterpillar View
3850229 Screw Formin Caterpillar View
6V0400 Cat Sintered Metal Flange Caterpillar View
3E4352 Washer Hard Caterpillar View
3603988 Kit Bearing Caterpillar View
3595885 Clamp As. Caterpillar View
9X2185 Screw Caterpillar View
0336043 Oring Caterpillar View
7P1695 , Flat Washer, Brass Caterpillar View
2987137 Bolt Caterpillar View
7G3832 Grommet Caterpillar View
6D2354 Boss Caterpillar View
1988262 Cover As Caterpillar View
1261767 Pin Caterpillar View
3418536 Seal Caterpillar View
3887651 Plug Caterpillar View
1999252 Oring Caterpillar View
7G3833 Clip Caterpillar View
2385080 Oring Caterpillar View
3609034 Clip Pipe Caterpillar View
3750351 Bolt Flange Caterpillar View
3779255 Fan Drive Pulley Caterpillar View
1013895 Bolt Caterpillar View
1608499 Nut Caterpillar View
3568338 Valve As Caterpillar View
3582398 Sensor Gp Sp Caterpillar View
3766895 Lines Gp F Caterpillar View

CONVENIENT OPERATING STATION

The machine controls and LCD display are integrated with an adjustable swivel seat and move with the operator. Layout options include vinyl for open platform configurations and cabin fabric, both can be equipped with underfloor heating. Also available is an extra luxurious high back seat. Other comfort features include a vibration-absorbing floor mat, a 12-volt power outlet that supports communication devices, a wide safety belt, cup holders and a lockable storage compartment.

COAT MANAGEMENT

A multifunctional drive lever with built-in controls for turning on / off water spraying, drum drift, vibration control and additional cutting edge height adjustment allows the operator to work confidently.

LCD

The backlit LCD display includes machine data and diagnostics. It is integrated with the seat, therefore it remains in the same position as the seat. Built-in lockable cover against vandalism provides protection. The display shows various language options, the ability to split the screen and indicators of speed, vibration per minute and fuel level.

CONVENIENT CONSOL

The console is integrated with the seat, providing access to the fingertip. Soft keys with tactile sensation provide instant feedback with the operator for intuitive control. The armrests are adjustable and can be adapted to the operator for added comfort.

PERFORMANCE FEATURES

Vibration systems offer many options that help fine-tune performance on heavy, difficult climbs. An automatic speed control feature makes it easier to maintain consistency and distance requirements between beats. In addition, the automatic vibration feature helps prevent excessive compaction and promotes uniformity.

FIVE AMPLITUDE VIBRATOR SYSTEMS

The system with five amplitudes is a strong blow to thick elevators and complex structures. It uses one frequency and five amplitudes, which can be easily adjusted according to the requirements of the application.

VERSA VIBE VIBRATOR SYSTEM

The Versa Vibe vibration system can be adapted for thin and thick lifts. Two amplitudes and two frequencies provide a 2 in 1 device that provides excellent versatility.

TEMPERATURE SENSORS

Dual infrared sensors mounted on the front and rear of the machine provide real-time readings that inform the operator when to start rolling and when to stop. This system helps operators avoid tender zones, which are often found in the temperature range 104–110 ° C (219–230 ° F).

PASS-COUNT MAPPING

Displaying the number of passes helps operators achieve target density and increase the efficiency of the rollers. The system records and tracks flow patterns to display coverage. The system also helps operators optimize drum overlap, simplify night-time work, eliminate re-assumptions and prevent incomplete passes, such as a short stop.

TEMPERATURE MAP

Temperature display provides a visual reading of the mat temperature to maintain the machine in the proper temperature range. The system records and monitors the temperature for subsequent analysis of the appropriate temperature range.

VALUE OF COMPACT MEASUREMENT

The Compression Meter Value (CMV) technology uses an accelerometer mounted on a drum to measure and record the vibrating drum forces.

CAR FOR COMMUNICATION MACHINE

Communication between machines helps improve workplace efficiency, allowing operators to view traffic patterns of other machines on the job site. This helps operators dive where other rollers have stopped. The system is also a determining factor when working at night because of the difficulties associated with poor lighting.

CAT C4.4 ENGINE

The C4.4 engine delivers 106 kW (142 hp) and is consistent with US EPA Tier4 Final emissions and EU Stage IV. It is equipped with an electronic control module (ECM) that provides optimum performance through precisely synchronized synchronization and fuel supply. The ECM provides advanced troubleshooting and diagnostic capabilities with Electronic Technician (Cat ET). Cat dealers are the only suppliers of warranty service for all machines and engines (excluding Cat).

HIGH CAPACITY COOLING SYSTEM

 

A large-capacity cooling system maintains low operating temperatures even under extreme conditions. High performance fan removes warm air from the operator for more comfortable work.

WEIGHTS

Standard - Operating Weight

26852.0 lb

Maximum Operating Weight

30380.0 lb

Static Linear Load

168.0 lb/in

OPERATING SPECIFICATIONS

Standard Compaction Width

79.0 in

Curb Clearance

28.0 in

Ground Clearance

11.5 in

Drum Offset

6.0 in

Maximum Compaction Width

85.0 in

ENGINE

Gross Power

142.0 HP

Engine Model

Cat C4.4 with ACERT Technology

TRAVEL SPEEDS

High

8.0 mile/h

Low

4.5 mile/h

DIMENSIONS

Overall Length

15.5 ft

Wheel Base

11.25 ft

Height - With ROPS/FOPS

10.0 ft

Overall Width

92.0 in

VIBRATORY SYSTEM

Vibration Selection

Independent per drum, front only, rear only, both

Centrifugal Force per Drum - Maximum

24728.0 lb

Centrifugal Force per Drum - Minimum

7800.0 lb

Maximum Amplitude

0.038 in

Maximum Frequency

2520.0 V/m

Minimum Amplitude

0.01 in

Minimum Frequency

2520.0 V/m

SERVICE REFILL CAPACITIES

 

Fuel Tank Capacity

66.0 gal (US)

Water Spray Tank Capacity

264.0 gal (US)

Dimensions

Overall Length 15.5ft in

Overall Width 7.67ft in

Operating Specifications

Ground Clearance 0.96ft in

Engine

Gross Power 142hp

Engine Model Cat C4.4 with ACERT Technology

Weights

Standard - Operating Weight 26852lb

Static Linear Load 168 lb/in

Maximum Operating Weight 30380lb

Dimensions

Overall Width 7.7ft in

Overall Length 15.5ft in

Wheel Base 11.3ft in

Height - With ROPS/FOPS 120in

Operating Specifications

Ground Clearance 1ft in

Curb Clearance 28in

Standard Compaction Width 79in

Drum Offset 6in

Maximum Compaction Width 85in

Service Refill Capacities

Fuel Tank Capacity 66gal

Water Spray Tank Capacity 264gal

Travel Speeds

Low 4.5mph

High 8mph

Vibratory System

Centrifugal Force per Drum – Maximum 24728lb

Maximum Amplitude 0.1in

Minimum Amplitude 0.1in

Centrifugal Force per Drum – Minimum 7800lb

Vibration Selection Independent per drum, front only, rear only, both

Maximum Frequency 2520 V/m

Minimum Frequency 2520 V/m