Caterpillar OFF HIGHWAY TRUCKS 775F - catalog of spare parts
Dimensions
Total length - 34 feet in
Total Width - 17.7 feet in
Working Width - 17.2 Feet in
Total height - 14.5 feet in
Wheelbase - 13.9 feet in
Ground clearance - 2.5 feet in
Blade Height - 30.5 Feet in
Unloading Clearance - 2.1 Feet
Internal Body Length - 20.1 feet in
Front Tire Width - 10.5 Feet
Front Canopy Height - 14.5 Feet in
Total Tire Width - 14.5 feet per
Loading height - empty - 13 feet in
Total Height - Raised Body - 30.5 feet in
Wheelbase - 13.8 feet in
Rear Axle - Tail - 9.3 feet in
Mine clearance - 2 feet per
Engine clearance - 2.4 feet in
Exterior Body Width - 14 ft.
Internal Body Width - 13.1 feet in
Rear Axle - Clearance - 2.2 Feet in
The middle line of the rear double tire width is 9 feet in
Total body length - 30.3 feet in
Height - Top ROPS - 13.5 feet in
Depth Inside - Maximum - 6.5 Feet in
Total Canopy Width - 16.4 feet in
Dump
Dump angle - 60 degrees
Choose OFF HIGHWAY TRUCKS 775F section:
| 3P2574 | BEARING AS | Caterpillar | View |
| 6Y2737 | CUP | Caterpillar | View |
| 6Y2736 | 6Y2736 | Caterpillar | View |
| 1P3935 | CONE | Caterpillar | View |
| 1P3934 | CUP-BEARING | Caterpillar | View |
| 7S4497 | GEAR | Caterpillar | View |
| 5S4442 | BEARING | Caterpillar | View |
| 5P1370 | BEARING A | Caterpillar | View |
| 5P0505 | CONE | Caterpillar | View |
| 3P8173 | 3P8173 | Caterpillar | View |
| 8T2275 | 8T2275 | Caterpillar | View |
| 3P2573 | 3P2573 | Caterpillar | View |
| 6Y4119 | 6Y4119 | Caterpillar | View |
| 8X6730 | 8X6730 | Caterpillar | View |
| 6V9191 | BEARING | Caterpillar | View |
| 1T1227 | GEAR | Caterpillar | View |
| 7S1874 | CONE-TAPERED | Caterpillar | View |
| 4W1204 | CONE | Caterpillar | View |
| 4W1203 | CUP | Caterpillar | View |
| 3P1210 | CONE | Caterpillar | View |
| 1P6872 | 1P6872 | Caterpillar | View |
| 8S0681 | SLEEVE | Caterpillar | View |
Specifications
Engine
The number of cylinders - 12
Engine make - 2236
Engine Model - C27 ACERT
Gross Power - 787 HP
Net power - 740 hp
The measured power @ - 2000 rpm
Displacement - 1649cu in
Maximum Torque - 2582 lb-ft
Peak Torque - 2582 lb-ft
Aspiration - Turbocharged
Hole Diameter - 5.4 inches
Net Power - Cat - 740 HP
Net Power - ISO 9249 - 740 HP
Net Power - SAE J1349 - 740 HP
Net power - 80/1269 / EEC - 740 hp
Gross Power - SAE J1995 - 787 HP
Engine Model - Cat C27 ACERT
Flywheel power - 740 hp
Rated engine speed - 2000 rpm
Operational
Fuel tank capacity - 185gal
Cooling system capacity - 46gal
Engine oil volume - 19gal
Diff and Final Drive fluid volume - 41 gal
Steering system capacity - 16 gal
The volume of the brake system is 81 gal
Hydraulic system capacity - 19 gal
Tire size - 24.00R35 (E4)
Transmission
Transmission Type - Transmission
Number of gears - Forward - 7
Number of gears - reverse - 1
Top Speed - 41.9 mph
Reverse - 8.8 mph
Forward - 1 - 6.7 mph
Forward - 2 - 9.3 mph
Forward - 3 - 12.6 mph
Forward - 4 - 17 miles per hour
Forward - 5 - 23 miles per hour
Forward - 6 - 31 miles per hour
Forward - 7 - 41.9 mph
Steering
Steering Standards - SAE J1511 OCT90, ISO 5010: 1992
Rotation angle - 31 degrees
Turning Diameter - Front - 77.1 ft in
Turn circle - Free Diameter - 85.7 feet in
Weights
Empty Weight - 105,830.6 pounds
Loaded Weight - 24,2001.2 lbs.
Front weight distribution - empty - 49%
Rear weight distribution - empty - 51%
Weight Distribution Front - Loaded - 33%
Rear weight distribution - loaded - 67%
Tires
Standard tire - 24.00R35 (E4)
Dump
Nominal Payload - 140,000 pounds
Payload - Impact - 41.8yd3
Payload - Fancy - 54.8yd3
Dump angle - 60 degrees
Lifting Time - 9.5sec
Shorter time - 12.5 s
The brakes
Brake surface - front - 216in2
Brake Surface - Rear - 9497in2
Brake Standards - ISO 3450: 1996
Dimensions
Total length - 33.92 feet in
Total Width - 17.68 ft in
Total height - 14.5 feet in
Wheelbase - 13.83 feet in
Ground clearance - 2.5 feet in
Blade Height - 30.42 Feet in
Blade clearance - 2.08 feet per
Body Lifts
Pump flow rate - high idle - 148 gal / min
Relief Valve Installation - Lift - 2750 psi
Body Lift Time - High Idle - 9.5 s
Body Lowering Time - Float - 12.5 s
Relief Valve Installation - Bottom - 500 psi
Latest discs
Planetary ratio - 4.80: 1
Differential coefficient - 3.64: 1
The overall reduction ratio is 17.49: 1
Performance characteristics
Nominal Payload Class (100%) - 140,000 pounds
Top Speed - Loaded - 41.9 mph
Maximum capacity - 140,000 pounds
Rise time - 9.5 s
Shorter time - 12.5 s
Rotation angle - 31 degrees
Body volume - SAE 2: 1 - 54.8yd3
Maximum workload (110%) - 154,000 pounds
Do not exceed payload (120%) * - 168,000 pounds
Turning Diameter - Front - 77.1 ft in
Service replenishment options
Cooling system - 46gal
Differential - Final drives - 41gal
Steering tank - 9gal
Steering system - including tank - 16gal
Fuel tank - 185gal
Torque converter - transmission system - including crankcase - 19 gal
Lift brake system - includes a tank - 81 gal
Carter - 25gal
Torque converter - transmission system - 14 gal
Brake / Hoist / Fan Hydraulic Tank - 35gal
Weight Distribution - Approximate
Front axle - empty - 49%
Front axle - loaded - 33%
The back bridge - empty - 51%
Rear Axle - Loaded - 67%
Capacity - double slope - 100% duty cycle
Amazed - 43.3yd3
Heap 2: 1 (SAE) - 55.6d3
Capacity - flat floor - 100% duty cycle
Blow - 41.8yd3
Heap 2: 1 (SAE) 54.8d3
ROPS
ROPS / FOPS Standards - .ISO 3471: 1994 ISO 3449: 1992 Level II
Sound
Sound Standards - ANSI / SAE J1166 MAY90.
Suspension
Rear Axle - Fluctuations - 8 degrees
Effective Cylinder Stroke - Front - 9.3 inches
Effective Cylinder Stroke - Rear - 5.9in
Approximate Weights - Two Layer Body - 29,877 pounds
Approximate Weights - Flat Floor - 29,665 Pounds