Caterpillar OFF HIGHWAY TRUCKS 775E - catalog of spare parts
Dimensions
Total length - 30.3 feet in
Total Width - 14.7 feet in
Working Width - 16.7 Feet in
Total height - 14.5 feet in
Wheelbase - 13.8 feet in
Ground clearance - 2.3 feet in
Blade Height - 28.9 Feet in
Unloading clearance - 2.3 feet in
Internal Body Length - 21.5 feet in
Front tire width 10.8 feet
Front Canopy Height - 14.5 Feet in
Full Tire Width - 14 feet per
Loading height - empty - 12.9 feet in
Total Height - Raised Case - 28.9 feet in
Wheelbase - 13.8 feet in
Rear Axle - Tail - 9.5 feet in
Mine clearance - 2.2 feet in
Engine clearance - 2.3 feet in
Internal Body Width - 13.1 feet in
Rear Axle - Clearance - 2.2 Feet in
Rear Tire Midline - 9.6 Feet
Total body length - 28.4 feet in
Height - Top ROPS - 13 ft.
Depth Inside - Maximum - 6.3 feet in
Total Canopy Width - 15.5 Feet in
Dump
Dump angle - 60 degrees
Choose OFF HIGHWAY TRUCKS 775E section:
3P2574 | BEARING AS | Caterpillar | View |
2P8987 | CONE BEARING | Caterpillar | View |
2P8986 | CUP | Caterpillar | View |
1P3935 | CONE | Caterpillar | View |
1P3934 | CUP-BEARING | Caterpillar | View |
8S9152 | CONE | Caterpillar | View |
7S4497 | GEAR | Caterpillar | View |
5S4442 | BEARING | Caterpillar | View |
8S9151 | CUP | Caterpillar | View |
5P0505 | CONE | Caterpillar | View |
3P8173 | 3P8173 | Caterpillar | View |
2W3773 | MUFFLER A | Caterpillar | View |
8T2275 | 8T2275 | Caterpillar | View |
3P2573 | 3P2573 | Caterpillar | View |
6Y4119 | 6Y4119 | Caterpillar | View |
8X6730 | 8X6730 | Caterpillar | View |
6V9191 | BEARING | Caterpillar | View |
1T1227 | GEAR | Caterpillar | View |
7S1874 | CONE-TAPERED | Caterpillar | View |
1P1367 | PLUNGER | Caterpillar | View |
4W5998 | PUSH RODS | Caterpillar | View |
3P1210 | CONE | Caterpillar | View |
1P6872 | 1P6872 | Caterpillar | View |
6V7725 | 6V7725 | Caterpillar | View |
8S0681 | SLEEVE | Caterpillar | View |
Specifications
Engine
The number of cylinders - 12
Engine make - 2236
Engine Model - 3412E
Gross Power - 760 HP
Net power - 730 hp
The measured power @ - 2000 rpm
Displacement - 1649cu in
Maximum Torque - 2542.4 lbs. Ft.
Torque boost - 33%
Hole Diameter - 5.4 inches
Net Power - Cat - 730 HP
Net Power - ISO 9249 - 730 HP
Net Power - SAE J1349 - 730 HP
Net power - 80/1269 / EEC - 730 hp
Gross Power - SAE J1995 - 760 HP
Engine Model - Cat 3412E
Flywheel power - 730 hp
Nominal engine speed - 2000 rpm
Operational
Fuel tank capacity - 85gal
Cooling system capacity - 40gal
Engine oil capacity - 18 gal
Fluid Diff and Final Drive - 41 gal
Steering system capacity - 16 gal
The volume of the brake system is 81 gal
Hydraulic Volume - 35 Gallons
Tire size - 24.00-R35 (E4)
Transmission
Number of gears - Forward - 7
Number of gears - reverse - 1
Top Speed - 40.9 mph
Reverse - 7.5 mph
Forward - 1 - 6.2 mph
Forward - 2 - 8.6 mph
Forward - 3 - 11.6 mph
Forward - 4 - 15.6 mph
Forward - 5 - 21.1 mph
Forward - 6 - 28.5 mph
Ahead - 7 - 41.1 mph
Steering
Steering Standards - Conforms to SAE J1511 FEB94 and ISO 5010: 1992
Angle of rotation - 31degrees
Turntable - clearance diameter - 78.9 feet in
Weights
Empty Weight - 67,000 pounds
Loaded weight - 239,000 pounds
Weight Distribution Front - Empty - 44.3%
Rear weight distribution - empty - 55.7%
Weight Distribution Front - Loaded - 31.2%
Weight distribution at the back - loaded - 68.8%
Tires
Standard bus - standard: 24.00-R35 (E4)
Dump
Nominal Payload - 136488.2 lbs
Payload - Stroke - 41.1yd3
Payload - Fancy - 54.3yd3
Dump angle - 60 degrees
The brakes
Brake surface - front - 216in2
Brake Surface - Rear - 9496in2
Brake Standards - ISO 3450: 1996
Dimensions
Total length - 30.21 feet in
Full Width - 14.63 feet in
Total height - 14.47 feet in
Wheelbase - 13.75 feet in
Ground clearance - 2.23 feet in
Blade Height - 28.86 Feet in
Dump clearance - 2.24 feet in
Body Lifts
Pump flow rate - high idle - 148 gal / min
Relief Valve Installation - Lift - 2750 psi
Body Lift Time - High Idle - 9.5 s
Body Lowering Time - Float - 12.5 s
Relief Valve Installation - Bottom - 500 psi
Latest discs
Planetary ratio - 4.80: 1
Differential coefficient - 3.64: 1
The overall reduction ratio is 17.48: 1
Operational characteristics
Nominal Payload Class (100%) - 140,000 pounds
Top Speed - Loaded - 41.1 mph
Body capacity - Impact - 41.1id3
Maximum capacity - 140,000 pounds
Rotation angle - 31 degrees
Body volume - SAE 2: 1 - 54.3yd3
Service replenishment options
Cooling system - 40gal
Differential - Final drives - 41gal
Steering tank - 9gal
Steering system - including tank - 16gal
Fuel tank - 185gal
Torque converter - transmission system - including crankcase - 19 gal
Torque converter - Brake - Hydraulic winch tank - 35gal
Lift brake system - includes a tank - 81 gal
Weight distribution - approximate
The front axle is empty - 44.3%
Front axle - loaded - 31.2%
The rear axle is empty - 55.7%
Rear axle - loaded - 68.8%
Capacity - double slope - 100% duty cycle
Blow - 42.8yd3
Heap 2: 1 (SAE) - 53.9d3
Capacity - flat floor - 100% duty cycle
Amazed - 41.1id3
Heap 2: 1 (SAE) - 54.3d3
ROPS
ROPS / FOPS Standards - Meets SAE J1040 MAY94 and ISO 3471: 1994
Sound
Sound Standards - Conforms to SAE J88 APR95
Suspension
Rear Axle - Fluctuations - 8 degrees
Effective Cylinder Stroke - Front - 8.2 inches
Effective Cylinder Stroke - Rear - 5.9in
Approximate Weights - Two-ply body - 21,400 pounds
Approximate Weights - Flat Floor - 28,814 lbs.