Caterpillar MULTI TERRAIN LOADERS 297D2 - catalog of spare parts
Dimensions
Ground clearance - 0.8 feet in
Bucket Pin Height - Maximum Lifting Height - 10.7 Feet
Height - Cab Top - 7 ft.
Total Length - Track - 90 Inches
Vehicle Width - 78.1 inches
Length - Track on the ground - 71.1 inches
Length - Without Bucket - 126 Inches
Length - with bucket on the ground - 155.2 inches
Maximum total height - 160.5 inches
Bucket Finger Height - Carry Position - 7.9 Inches
Clearance at maximum lift and unload - 96.3 inches
Departure angle - 30 degrees
Maximum angle of dumping - 52 degrees
A-pillar angle - maximum height - 83 degrees
Pin Bucket Lug - Maximum Lift - 15.2 Inches
Achieve - Maximum Rise / Drop - 30.5 inches
Rollback angle - 27 degrees
Turning radius from the center - rear of the machine - 73.4 inches
Center Turn Radius - Clutch - 59.2in
Center Turn Radius - Bucket (Rack) - 91.8 inches
Maximum reach - with arms parallel to the ground - 49.6 inches
| 3P1210 | CONE | Caterpillar | View |
Specifications
engine
Net power - 95 hp
Displacement - 232cu per
Hole - 3.9 inches
4.7 inch travel
Net Power - ISO 9249 - 95 HP
Gross Power - SAE J1995 - 98 HP
Engine Model - Cat C3.8 DIT (Turbo)
Net Power - SAE 1349 - 95 HP
Peak Torque - 1,500 rpm - SAE J1995 - 246 lb-ft
Power train
Speed - Forward or Reverse - One Speed - 5.9 Miles per Hour
Drive Speed - Forward or Backward - Two speeds - 9.4 mph
Weights
The note
Operating Weight, Performance, and Dimensions for an 75 kg (165 lb) operator, all fluids, two-speed, enclosed cab with glass door, side windows, heater, mechanical suspension seat, advanced display, 880 CCA battery, 1981 mm ( 78 mm) c) a dirt bucket, a standard hydraulic flow system, additional counterweights and a manual quick-release device (unless otherwise indicated).
Hydraulic system
Hydraulic flow - High Flow XPS - Hydraulic power (calculated) - 76 hp
Hydraulic Flow - Standard - Loader Hydraulic Pressure - 3335 psi
Hydraulic Flow - Standard - Loader Hydraulic Flow - 23 gallons / min
Hydraulic flow - Standard - Hydraulic power (rated) - 44 hp
Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Pressure - 4061 psi
Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Flow - 32 gallons / min
Performance characteristics
Rated Operational Power - 50% Tipping Load - 4,700 lbs.
Rated Load - 35% Tipping Load - 3,290 lbs.
Ground Contact Area - 2561in2
Ground Pressure - 4.2 psi
Nominal Working Capacity with Extra Counterweight - 4,960 lbs.
Tipping Load - 9,400 pounds
Breakout Force - Tilt Cylinder - 7468 lbs
Breakout Force - Lift Cylinder - 6072 lbs
Service replenishment options
Cooling system - 4.1 gal
Fuel Tank - 32.2 gallons
Hydraulic Tank - 10.3 Gallons
Crankcase - 3.5gal
Hydraulic system - 14.5 gal
Diesel Exhaust Fluid (DEF) - 5 gallons
Taxi
ROPS - ISO 3471: 2008
FOPS - ISO 3449: 2005 Level I
FOPS Level II - ISO 3449: 2005 Level II
Air conditioning system
Air conditioning
The air conditioning system on this unit contains the fluorinated greenhouse refrigerant R134a (global warming potential = 1430). The system contains 0.81 kg of refrigerant with a CO2 equivalent of 1.158 metric tons.
Noise level
Inside the cab * - 83 dB (A)
External cab ** - 104 dB (A)
Note (1)
Cab and Roll Over Protective Structures (ROPS) are standard in North America and Europe.
Note (2)
* Declared dynamic sound pressure levels of the operator according to ISO 6396: 2008. The measurements were carried out with the doors and windows of the cab closed and at 70% of the maximum speed of rotation of the engine cooling fan. Sound levels may vary at different speeds of the engine cooling fan.
Note (3)
** Indicated sound power level for marked CE configurations when measured in accordance with the test procedure and conditions specified in 2000/14 / EC.