Caterpillar MULTI TERRAIN LOADERS 289D - catalog of spare parts
Dimensions
Dump angle - 51 degrees
Total path length - 7 feet in
Track Width - 6.4 Feet
Length with Bucket - 12.2 Feet in
Length without bucket - 9.9 feet in
Total height - 13.2 feet in
Cab Height - 7 ft.
Ground clearance - 8.9 inches
Ground clearance at Max Lift and Dump - 7.9 feet in
Reach at Max Lift and Dump - 2.5 ft.
Turning radius from center - rear of car - 70.8 inches
Bucket Pin Height - Maximum Lifting Height - 10.5 Feet
Height - Cab Top - 7 ft.
Total track length - 83.8 inches
Length - Track on the ground - 64.2 inches
Length - Without Bucket - 117.9 Inches
Length - with bucket on the ground - 146.2 inches
Maximum total height - 158.1 inches
Bucket Finger Height - Carry Position - 7.5 Inches
Ground clearance at maximum lift and unload - 94 inches
Departure angle - 33 degrees
Maximum angle of dumping - 51 degrees
A-pillar angle - maximum height - 84 degrees
Pin Bucket Lug - Maximum Rise - 14.5 Inches
Achieve - maximum lift / reset - 30 inches
Vehicle Width (400 mm / 15.7 in tracks) - 76 inches
Vehicle Width (450 mm / 17.7 in tracks) - 78 inches
Turning radius from the center - behind the car - 70.7 inches
Center Turn Radius - Coupling - 55.5 inches
Maximum reach - with arms parallel to the ground - 50 inches
Center Turn Radius - Bucket - 88.8 inches
Chassis
The length of the path on earth is 5.35 feet in
| 3P1210 | CONE | Caterpillar | View |
Specifications
engine
Engine make - DIT
Engine Model -Cat C3.3B
Gross Power - 74.3 HP
Net power - 72.9 hp
Peak Torque - 195.5 lb ft
Measured Torque @ - 1,500 rpm
Displacement - 203cu per
Hole Diameter - 3.7 inches
4.7 inch travel
Net Power - ISO 9249 - 73.7 HP
Gross Power - SAE J1995 - 74.3 HP
Engine Model - Cat C3.3B DIT (Turbo)
Net Power - SAE 1349 - 72.9 HP
Peak Torque - 1,500 rpm - SAE J1995 - 195 lb-ft
Operational
Working Weight - 10,533.7 lbs.
24.9 gallon fuel tank capacity
Cooling system capacity - 3.7 gallons
The volume of the hydraulic system - 13.8 g
Operating voltage - 12 V
Generator current strength - 80 amperes
Top Speed - Low Range - 4.5 mph
Top Speed - High Range - 7.1 mph
Power train
Speed - Forward or Reverse - One Speed - 4.5 Miles per Hour
Movement speed - forward or backward - two speeds - 7 miles per hour
Chassis
Land Contact Area - 2015.1in2
Ground Pressure - 5.3psi
The length of the path on earth is 5.4 feet in
Weights
Working Weight - 10,533 lbs.
The note
Operating Weight, Performance, and Dimensions, All Based on an 75kg (165 lb) Operator, All Fluids, Two-Speed, OROPS, 1981 mm (78 in) Dirt Bucket, 400 mm (15.7 in) Track, Two-Flange Front Tension roller / single flange rear tensioner, standard hydraulic flow system, seat with mechanical suspension, optional counterweights are not provided, and quick-release coupling with manual transmission (unless otherwise specified).
Loader
Tipping Load - 7,599.4 lbs.
Breakout Force - 7,290.7 lbs.
Hydraulic system
Hydraulic flow - High Flow XPS - Hydraulic power (calculated) - 76 hp
Hydraulic Flow - Standard - Loader Hydraulic Pressure - 3335 psi
Hydraulic Flow - Standard - Loader Hydraulic Flow - 23 psi
Hydraulic flow - Standard - Hydraulic power (rated) - 44 hp
Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Pressure - 4061 psi
Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Flow - 32 gallons / min
Hydraulic
Pump flow rate - 22.8 gal / min
Pressure Relief Valve - 3335.9 psi
Dimensions
Track Width - 6.34 Feet
Height to Cab Top - 6.94 Feet in
Ground clearance - 8.9 inches
Ground clearance at Max Lift and Dump - 7.84 feet in
Reach at Max Lift and Dump - 2.5 ft.
Performance characteristics
The note
Operating Weight, Performance, and Dimensions, All Based on an 75kg (165 lb) Operator, All Fluids, Two-Speed, OROPS, 1981 mm (78 in) Dirt Bucket, 400 mm (15.7 in) Track, Two-Flange Front Tension roller / single flange rear tensioner, standard hydraulic flow system, seat with mechanical suspension, optional counterweights are not provided, and quick-release coupling with manual transmission (unless otherwise specified).
Nominal Operating Power - 50% Tipping Load - 3,800 lbs.
Rated Operating Power - 35% Tipping Load - 2,660 lbs.
Nominal Working Capacity with Extra Counterweight - 4050 lbs
Tipping Load - 7,600 pounds
Breakout Force - Tilt Cylinder - 7291 lbs.
Land contact area - from 400 mm / 15.7 crawler - 2015in2
Ground Contact Area - From 450 mm / 17.7 in the track - 2272in2
Ground Pressure - From 400mm / 15.7 Crawler - 5.2 psi
Ground Pressure - From 450 mm / 17.7 in the track - 4.6 psi
Service replenishment options
Cooling System - 3.7gal
Fuel tank - 24.8 gal
Hydraulic Tank - 10.3 Gallons
Crankcase - 3gal
Hydraulic system - 13.7 gal
Taxi
ROPS - ISO 3471: 2008
FOPS - ISO 3449: 2005 Level I
FOPS Level II - ISO 3449: 2005 Level II