Caterpillar MULTI TERRAIN LOADERS 287C - catalog of spare parts
Dimensions
Track Width - 6.5 Feet in
Length with Bucket - 12.2 Feet in
Length without bucket - 9.8 feet in
Cab Height - 7 ft.
Ground clearance - 8.8 inches
Ground clearance at Max Lift and Dump - 8.1 feet per
Reach in Max Lift and Dump - 2.6 feet in
Turning radius from center - rear of car - 64.1 inches
Turn radius from center - incl. Bucket - 91.8in
Bucket Pin Height - Maximum Lifting Height - 10.7 Feet
Height - Cab Top - 7 ft.
Total Length - Track - 90 Inches
Reach at maximum lift / drop - 30.9 inches
Vehicle Width - 78 Inches
Length - Track on the ground - 71.2 inches
Length - Without Bucket - 117.2 Inches
Length - with bucket on the ground - 145.4 inches
Maximum total height - 160.4 inches
Bucket Finger Height - Carry Position - 7.8 inches
Clearance at maximum lift and unload - 96.5 inches
Departure angle - 42 degrees
Maximum angle of dumping - 50 degrees
Rear Upright Angle - Maximum Height - 85 degrees
Rotate Radius From Center - Rear - 64 Inches
Center Turn Radius - Coupling - 58.5 inches
Turning radius from center - bucket - 91.7 inches
Maximum reach - with weapons in parallel - 50.6 inches
Pin Bucket Lug - Maximum Rise - 14.7 Inches
Chassis
The length of the path on earth is 5.94 feet in
Choose MULTI TERRAIN LOADERS 287C section:
Specifications
engine
The number of cylinders - 4
Engine make - 2236
Engine Model - C3.4 DIT
Gross Power - 84 HP
Net power - 82 hp
Measured Power @ - 2500 rpm
Displacement - 201cu in
Hole Diameter - 3.7 inches
4.7 inch travel
Gross Power - SAE J1995 - 84 HP
Engine Model - Cat C3.4 DIT
Engine power - ISO 14396 - 83 hp
Net Power - EEC 80/1269 - 83 HP
Net Power - ISO 9249 EEC - 83 HP
Net Power - SAE 1349 - 82 HP
Operational
Working Weight - 9,958 lbs
25.9 gallon fuel tank capacity
Cooling system capacity - 3.7 gallons
Engine oil capacity - 2.7 gal
Hydraulic Capacity - 15.1 Gallons
Operating voltage - 12 V
The amplifier from the generator - 90 amperes
Top Speed - Low Range - 5.6 mph
Max. Speed - High Range - 9.3 mph
Power train
Forward Speed - 5.6 Mph
Speed reverse - 5.6 mph
Speed reverse - 2-speed - 9.3 mph
Forward Speed - 2-Speed - 9.3 mph
Chassis
Land Contact Area - 2542in2
Ground Pressure - 4psi
The length of the path on earth is 6 feet in
Weights
Working Weight - 9,958 lbs
Loader
Breakout Force - 7,308 lbs
Workload - 3,800 pounds
Tipping angle - 7743 degrees
Hydraulic system
Hydraulic flow (1) - standard
Hydraulic power - 42.8 hp
Loader maximum hydraulic flow 33 gallons / min
Loader Maximum Hydraulic Pressure - 4061 psi
Loader Hydraulic Pressure - 3335 psi
Loader Hydraulic Flow - 22 gallons / min
Hydraulic Flow (2) - High Flow XPS
Hydraulic
Pump flow rate - 22.2 gal / min
Pressure Relief Valve - 3335.9 psi
Dimensions
Track Width - 6.5 Feet in
Height to Cab Top - 6.94 Feet in
Ground clearance - 8.81 inches
Ground clearance at Max Lift and Dump - 8.04 feet in
Reach at Max Lift and Dump - 2.58 ft in
Performance characteristics
Nominal Operating Power - 50% Tipping Load - 3,800 lbs.
Rated operational power - 35% tipping load - 2,709 pounds
Land Contact Area - 2542in2
Ground Pressure - 3.9 psi
Nominal Working Capacity with Extra Counterweight - 4,118 lbs
Tipping Load - 7,743 lbs.
Breakout Force - Tilt Cylinder - 7,308 lbs
Service replenishment options
Cooling System - 3.7gal
Fuel tank - 26gal
Hydraulic tank - 11 gal
Crankcase - 2.6gal
Hydraulic system - 15 gal
Taxi
ROPS - SAE J1040 MAY94, ISO 3471: 1994
FOPS - SAE J1043 SEPT87, ISO 3449: 1992 Level I
FOPS Level II - SAE J231 JAN81, ISO 3449: 1992 Level II