Caterpillar MULTI TERRAIN LOADERS 279D - catalog of spare parts
Dimensions
Dump angle - 39 degrees
Total path length - 7 feet in
Track Width - 6.4 Feet
Length with Bucket - 12.2 Feet in
Length without bucket - 9.9 feet in
Total height - 13.2 feet in
Cab Height - 7 ft.
Ground clearance - 8.9 inches
Ground clearance at Max Lift and Dump - 8.2 feet in
Reach Max Lift and Dump - 1.9 Feet
Turning radius from center - rear of car - 70.8 inches
Bucket Pin Height - Maximum Lifting Height - 10.5 Feet
Height - Cab Top - 7 ft.
Total track length - 83.8 inches
Length - Track on the ground - 64.2 inches
Length - Without Bucket - 117.9 Inches
Length - with bucket on the ground - 146.2 inches
Maximum total height - 159.5 inches
Bucket Finger Height - Carry Position - 7.8 inches
Ground clearance at maximum lift and unload - 97.8 inches
Departure angle - 32 degrees
Maximum angle of dumping - 39 degrees
A-pillar angle - maximum height - 84 degrees
Achieve - maximum lift / drop - 22.6 inches
Vehicle Width (400 mm / 15.7 in tracks) - 76 inches
Vehicle Width (450 mm / 17.7 in tracks) - 78 inches
Turning radius from the center - behind the car - 70.7 inches
Center Turn Radius - Coupling - 55.5 inches
Maximum reach - with arms parallel to the ground - 54 inches
Center Turn Radius - Bucket - 88.8 inches
chassis
The length of the path on earth is 5.35 feet in
3P1210 | CONE | Caterpillar | View |
Specifications
engine
Engine make - DIT
Engine Model - Cat C3.3B
Gross Power - 74.3 HP
Net power - 72.9 hp
Peak Torque - 195.5 lb ft
Measured Torque @ - 1,500 rpm
Displacement - 203cu per
Hole Diameter - 3.7 inches
4.7 inch travel
Net Power - ISO 9249 - 73.7 HP
Gross Power - SAE J1995 - 74.3 HP
Engine Model - Cat C3.3B DIT (Turbo)
Net Power - SAE 1349 - 72.9 HP
Peak Torque - 1,500 rpm - SAE J1995 - 195 lb-ft
Operational
Working Weight - 9892.2 lbs.
24.9 gallon fuel tank capacity
Cooling system capacity - 3.7 gallons
The volume of the hydraulic system - 13.8 g
Operating voltage - 12 V
Generator current strength - 80 amperes
Top Speed - Low Range - 4.5 mph
Top Speed - High Range - 7.1 mph
Power train
Speed - Forward or Reverse - One Speed - 4.5 Miles per Hour
Movement speed - forward or backward - two speeds - 7 miles per hour
Chassis
Land Contact Area - 2015.1in2
Ground Pressure - 5 psi
The length of the path on earth is 5.4 feet in
Weights
Working Weight - 9893 lbs.
The note
Operating Weight, Performance, and Dimensions, All Based on an 75kg (165 lb) Operator, All Fluids, Two-Speed, OROPS, 1981 mm (78 in) Dirt Bucket, 400 mm (15.7 in) Track, Two-Flange Front Tension roller / single flange rear tensioner, standard hydraulic flow system, seat with mechanical suspension, optional counterweights are not provided, and quick-release coupling with manual transmission (unless otherwise specified).
Loader
Tipping Load - 5871 lbs.
Breakout Force - 7,284.1 pounds
Hydraulic system
Hydraulic flow - High Flow XPS - Hydraulic power (calculated) - 76 hp
Hydraulic Flow - Standard - Loader Hydraulic Pressure - 3335 psi
Hydraulic Flow - Standard - Loader Hydraulic Flow - 23 psi
Hydraulic flow - Standard - Hydraulic power (rated) - 44 hp
Hydraulic flow - High Flow XPS - Maximum hydraulic pressure in the loader - 4061 hp
Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Flow - 32 gallons / min
Hydraulic
Pump flow rate - 22.8 gal / min
Pressure Relief Valve - 3335.9 psi
Dimensions
Track Width - 6.34 Feet
Height to Cab Top - 6.94 Feet in
Ground clearance - 8.9 inches
Ground clearance in Max Lift and Dump - 8.16 feet in
Reach in Max Lift and Dump - 1.89ft in
Performance characteristics
The note
Operating Weight, Performance, and Dimensions, All Based on an 75kg (165 lb) Operator, All Fluids, Two-Speed, OROPS, 1981 mm (78 in) Dirt Bucket, 400 mm (15.7 in) Track, Two-Flange Front Tension roller / single flange rear tensioner, standard hydraulic flow system, seat with mechanical suspension, optional counterweights are not provided, and quick-release coupling with manual transmission (unless otherwise specified).
Rated Operating Power - 50% Tipping Load - 2,935 lbs.
Rated Operational Power - 35% Tipping Load - 2055 lbs
Nominal Working Capacity with Extra Counterweight - 3,185 lbs
Tipping Load - 5,870 pounds
Breakout Force - Tilt Cylinder - 7,285 lbs
Land contact area - from 400 mm / 15.7 crawler - 2015in2
Ground Contact Area - From 450 mm / 17.7 in the track - 2272in2
Ground Pressure - From 400mm / 15.7 Crawler - 4.9 psi
Ground Pressure - C 450 mm / 17.7 crawler - 4.4 psi
Service replenishment options
Cooling System - 3.7gal
Fuel tank - 24.8 gal
Hydraulic Tank - 10.3 Gallons
Crankcase - 3gal
Hydraulic system - 13.7 gal
Taxi
ROPS - ISO 3471: 2008
FOPS - ISO 3449: 2005 Level I
FOPS Level II - ISO 3449: 2005 Level II
Air conditioning system
Air conditioning
The air conditioning system on this unit contains the fluorinated greenhouse refrigerant R134a (global warming potential = 1430). The system contains 1.0 kg of refrigerant with a CO2 equivalent of 1,430 metric tons.
Noise level
Note (1)
Cab and Roll Over Protective Structures (ROPS) are standard in North America and Europe.
Note (2)
** Declared dynamic sound pressure levels of the operator according to ISO 6396: 2008. The measurements were carried out with the doors and windows of the cabin closed and at 70% of the maximum engine cooling fan rotation speed. Sound levels may vary at different speeds of the engine cooling fan.
Note (3)
*** The indicated sound power level for marked CE configurations when measured in accordance with the test procedure and conditions specified in 2000/14 / EC.
Inside the cab ** - 83 dB (A)
External cab *** - 103 dB (A)