Your region: United States

Caterpillar MULTI TERRAIN LOADERS 279C - catalog of spare parts

Dimensions

Track Width - 6.5 Feet in

Bucket Length - 12.1 Feet in

Length without bucket - 9.8 feet in

Cab Height - 7 ft.

Ground clearance - 9.1 inches

Ground clearance at Max Lift and Dump - 8 ft.

Reach in Max Lift and Dump - 2 feet in

Turning radius from center - rear of car - 64.6 inches

Turn radius from center - incl. Bucket - 91.2in

Bucket Finger Height - Maximum Lifting Height - 10.3 Feet

Height - Cab Top - 7 ft.

Total Length - Track - 89.4 inches

Reach at maximum lift / drop - 23.4 inches

Vehicle Width - 78 Inches

Length - Track on the ground - 69.6 inches

Length - without bucket - 116.5 inches

Length - with bucket on the ground - 144.8 inches

Maximum total height - 157.7 inches

Bucket Finger Height - Carry Position - 7.7 Inches

Ground clearance at maximum lift and unload - 95.6 inches

Departure angle - 44 degrees

Maximum angle of dumping - 40 degrees

Rear Upright Angle - Maximum Height - 85 degrees

Turning radius from center - rear - 64.6 inches

Turning radius from center - hitch - 57.9 inches

Turning radius from center - bucket - 91.1 inches

Maximum reach - with parallel arms - 54.6 inches

Chassis

The length of the path on earth is 5.8 feet in

Choose MULTI TERRAIN LOADERS 279C section:

Specifications

engine

The number of cylinders - 4

Engine make - 2236

Engine Model - C3.4 DIT

Gross Power - 84 HP

Net power - 82 hp

Measured Power @ - 2500 rpm

Displacement - 201cu in

Hole Diameter 3.4 inches

4.7 inch travel

Aspiration - Turbocharged

Gross Power - SAE J1995 - 84 HP

Engine Model - Cat C3.4T

Net Power - SAE 1349 - 82 HP

Operational

Working Weight - 9892 lbs.

25.9 gallon fuel tank capacity

Cooling system capacity - 3.7 gallons

Engine oil capacity - 2.7 gal

Hydraulic Capacity - 15.1 Gallons

Operating voltage - 12 V

The amplifier from the generator - 90 amperes

Top Speed ​​- Low Range - 5.1 mph

Top Speed ​​- High Range - 8.5 Mph

Power train

Forward Speed ​​- 2 speeds - 8.5 miles per hour

Reverse Speed ​​- 2 speeds - 8.5 miles per hour

Chassis

Land Contact Area - 2504in2

Ground Pressure - 4psi

The length of the path on earth is 5.8 feet in

Weights

Working Weight - 9892 lbs.

Loader

Breakout Force - 7,308 lbs

Workload - 3,200 pounds

Tipping angle - 6483 degrees

Bucket Capacity - 0.6yd3

Hydraulic system

Hydraulic flow (1) - standard

Hydraulic power - 42.8 hp

Loader maximum hydraulic flow 33 gallons / min

Loader Maximum Hydraulic Pressure - 4061 psi

Loader Hydraulic Pressure - 3335 psi

Loader Hydraulic Flow - 22 gallons / min

Hydraulic Flow (2) - High Flow XPS

Hydraulic

Pump flow rate - 22.2 gal / min

Pressure relief valve - 3335 psi Inch

Dimensions

Track Width - 6.5 Feet in

Height to Cab Top - 6.95 Feet in

Ground clearance - 9.1 inches

Ground clearance in Max Lift and Dump - 7.97 feet in

Reach in Max Lift and Dump - 1.95 feet in

Performance characteristics

Rated Operational Power - 50% Tipping Load - 3,200 lbs.

Rated Operating Power - 35% Tipping Load - 2,240 lbs

Land Contact Area - 2504in2

Ground Pressure - 4 psi

Nominal working capacity with optional counterweight - 3,465 pounds

Tipping Load - 6,483 lbs.

Breakout Force - Tilt Cylinder - 7,308 lbs

Service replenishment options

Cooling System - 3.7gal

Fuel tank - 26gal

Hydraulic tank - 11 gal

Crankcase - 2.6gal

Hydraulic system - 15 gal

Taxi

ROPS - SAE J1040 MAY94, ISO 3471: 1994

FOPS - SAE J1043 SEPT87, ISO 3449: 1992 Level I

FOPS Level II - SAE J231 JAN81, ISO 3449: 1992 Level II