Caterpillar MULTI TERRAIN LOADERS 277D - catalog of spare parts
Dimensions
Ground clearance - 0.8 feet in
Bucket Pin Height - Maximum Lifting Height - 10.5 Feet
Height - Cab Top - 7 ft.
Total Length - Track - 90 Inches
Vehicle Width - 78 Inches
Length - Track on the ground - 71.1 inches
Length - Without Bucket - 117.9 Inches
Length - with bucket on the ground - 146.2 inches
Maximum total height - 159.5 inches
Bucket Finger Height - Carry Position - 8 Inches
Ground clearance at maximum lift and unload - 97.9
Departure angle - 38 degrees
Maximum angle of dumping - 39 degrees
A-pillar angle - maximum height - 94 degrees
Achieve - Maximum Rise / Drop - 23.5 inches
Turning radius from the center - rear of the machine - 67.4 inches
Center Turn Radius - Clutch - 58.8in
Maximum reach - with arms parallel to the ground - 54.9 inches
Center Turn Radius - Bucket - 92 Inches
3P1210 | CONE | Caterpillar | View |
Specifications
engine
Gross Power - 74.3 HP
Net power - 72.9 hp
Displacement - 203cu per
Hole Diameter - 3.7 inches
4.7 inch travel
Net Power - ISO 9249 - 73.7 HP
Gross Power - SAE J1995 - 74.3 HP
Engine Model - Cat C3.3B DIT (Turbo)
Net Power - SAE 1349 - 72.9 HP
Peak Torque - 1,500 rpm - SAE J1995 - 195 lb-ft
Power train
Travel Speed - Forward or Reverse - One Speed - 5.2 mph
Speed - forward or reverse - two speeds - 8 miles per hour
Weights
The note
Operating Weight, Performance and Dimensions, all based on an operator weighing 75 kg (165 lbs), all fluids, two-speed, OROPS, 1981 mm (78 in) mud bucket, standard hydraulic flow system, mechanical suspension seat, additional counterweights and additional quick-change couplers with manual control (unless otherwise noted).
Hydraulic system
Hydraulic flow - High Flow XPS - Hydraulic power (calculated) - 76 hp
Hydraulic Flow - Standard - Loader Hydraulic Pressure - 3335 psi
Hydraulic Flow - Standard - Loader Hydraulic Flow - 23 gallons / min
Hydraulic flow - Standard - Hydraulic power (rated) - 44 hp
Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Pressure - 4061 psi
Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Flow - 32 gallons / min
Performance characteristics
The note
Operating Weight, Performance and Dimensions, all based on an operator weighing 75 kg (165 lbs), all fluids, two-speed, OROPS, 1981 mm (78 in) mud bucket, standard hydraulic flow system, mechanical suspension seat, additional counterweights and additional quick-change couplers with manual control (unless otherwise noted).
Rated Operational Power - 50% Tipping Load - 3,290 lbs.
Rated Operational Power - 35% Tipping Load - 2303 lbs.
Ground Contact Area - 2561in2
Ground Pressure - 3.6 psi
Nominal Working Capacity with Extra Counterweight - 3,540 lbs
Tipping Load - 6,580 pounds
Breakout Force - Tilt Cylinder - 7,285 lbs
Service replenishment options
Cooling System - 3.7gal
Fuel tank - 24.8 gal
Hydraulic Tank - 10.3 Gallons
Crankcase - 3gal
Hydraulic system - 13.7 gal
Taxi
ROPS - ISO 3471: 2008
FOPS - ISO 3449: 2005 Level I
FOPS Level II - ISO 3449: 2005 Level II
Air conditioning system
Air conditioning
The air conditioning system on this unit contains the fluorinated greenhouse refrigerant R134a (global warming potential = 1430). The system contains 1.0 kg of refrigerant with a CO2 equivalent of 1,430 metric tons.
Noise level
Note (1)
Cab and Roll Over Protective Structures (ROPS) are standard in North America and Europe.
Note (2)
** Declared dynamic sound pressure levels of the operator according to ISO 6396: 2008. The measurements were carried out with the doors and windows of the cabin closed and at 70% of the maximum engine cooling fan rotation speed. Sound levels may vary at different speeds of the engine cooling fan.
Note (3)
*** The indicated sound power level for marked CE configurations when measured in accordance with the test procedure and conditions specified in 2000/14 / EC.
Inside the cab ** - 81 dB (A)
External cab *** - 103 dB (A)