Caterpillar MULTI TERRAIN LOADERS 277B - catalog of spare parts
Dimensions
Track Width - 6.3 ft.
Bucket Length - 12.1 Feet in
Length without bucket - 9.6 feet in
Height to Cab Top - 6.9 Feet in
Ground clearance - 14 inches
Ground clearance at Max Lift and Dump - 7.8 feet in
Reach at Max Lift and Dump - 2.3 feet in
Turning radius from the center - behind the car - 60.9 inches
Turn radius from center - incl. Bucket - 98.9 inches
Bucket Pin Height - Maximum Lifting Height - 10.2 Feet
Height - Cab Top - 6.9 Feet in
Total Length - Track - 98 inches
Reach at maximum lift / drop - 27 inches
Vehicle Width - 75 Inches
Length - Track on the ground - 81 inches
Length - Without Bucket - 115 Inches
Length - with bucket on the ground - 145 inches
Maximum total height - 158 inches
Bucket Finger Height - Carry Position - 10 Inches
Ground clearance at maximum lift and unload - 93 inches
Turning radius from center - rear - 60.8 inches
Center Turn Radius - Coupling - 63.1 inches
Turning radius from center - bucket - 98.9 inches
Maximum reach - with weapons in parallel - 57.3 inches
Chassis
The ground is 6.71 feet long.
Choose MULTI TERRAIN LOADERS 277B section:
Specifications
engine
Engine make - 236
Engine Model - 3044C DIT T
Gross Power - 82 hp
Net power - 78 hp
Displacement - 201cu in
Hole Diameter - 3.7 inches
4.7 inch travel
Aspiration - Turbocharged
Gross Power - SAE J1995 - 82 HP
Engine Model - Cat 3044C DIT
Engine power - ISO 14396 - 80 hp
Net Power - EEC 80/1269 - 78 HP
Net Power - ISO 9249 EEC - 78 HP
Net Power - SAE 1349 - 78 HP
Operational
Working Weight - 9,369.7 lbs.
25.1 gallon fuel tank capacity
Cooling system capacity - 2.7 gal
Engine oil capacity - 2.7 gal
The volume of the hydraulic system - 13.8 g
Operating voltage - 12 V
The amplifier from the generator - 90 amperes
Max. Speed - High Range - 7 Mph
Power train
Forward Speed - 7 Mph
Reverse Speed - 7 Mph
Chassis
Land Contact Area - 2898.6in2
Ground Pressure - 3.2 psi
The length of the path on earth is 6.8 feet in
Weights
Operating Weight - 9411 pounds
Loader
Breakout Force - 5,482.9 lbs.
Workload - 2,949.8 pounds
Tipping angle - 5899.6 degrees
Hydraulic system
Hydraulic power - 42.8 hp
Loader Hydraulic Pressure - 3335 psi
Loader Hydraulic Flow - 22 gallons / min
Hydraulic flow - standard
Hydraulic
Pump flow rate - 22 gal / min
Pressure Relief Valve - 3335.9 psi
Dimensions
Track Width - 6.23 Feet
Height to Cab Top - 6.81 Feet in
Ground clearance - 14 inches
Ground clearance in Max Lift and Dump - 7.71 feet in
Reach at Max. Lift and Dump - 2.22 ft in
Performance characteristics
Rated Operating Power - 50% Tipping Load - 2,950 lbs.
Nominal Operating Power - 35% Tipping Load - 2065 lbs
Ground Contact Area - 2898in2
Ground Pressure - 3.1 psi
Tipping Load - 5,900 lbs.
Breakout Force - Tilt Cylinder - 5484 lbs.
Service replenishment options
Cooling system - 2.6gal
Fuel tank - 25.1 gal
Hydraulic Tank - 9.2 Gallons
Crankcase - 2.6gal
Hydraulic system - 13.7 gal
Taxi
ROPS - SAE J1040 MAY94, ISO 3471: 1994
FOPS - SAE J / ISO 3449 APR98 Level I, ISO 3449: 1992 Level I
FOPS Level II - SAE J / ISO 3449 APR98 Level II, ISO 3449: 1992 Level II