Caterpillar MOTOR GRADER 140M - catalog of spare parts
Dimensions
Full length - 28.58 ft in
Width above tires - 8.17 ft to
Wheelbase - 20.08 ft in
Rear clearance - 1.13 ft in
Front clearance - 1.87 ft to
Wheelbase Tandem Bridge - 5 feet in
Blade base - 8.39 feet to
Choose MOTOR GRADER 140M section:
Specifications
Ripper
Ejection force - 26259lb
Digging Depth - Maximum - 16.8in
Shank Holders - five
Penetration power - 20540lb
Increase machine length, increase beam - 36.2in
Distance between ripper shank holders - 21in
Engine
Number of cylinders - 6
Engine make - 2236
Engineering model - C7 ACERT VHP
Measured power @ - 2000rpm
Maximum power - 183hp
Net Power Gears 7-8 - 183hp
Displacement - 439cu in
Boring - 4.3in
Stroke - 5in
Emissions - Emissions are equivalent to US EPA Level 3 and EU Stage IIIA.
Engineering model - Cat C7 ACERT
Note (1) - Maximum torque (VHP Plus) is measured at 1000 rpm.
Note (2) - Net power is tested in accordance with ISO 9249, SAE J1349 and EEC 80/1269 at the time of manufacture.
Note (3) - The declared net power is the power available at a nominal speed of 2000 rpm, measured on the flywheel when the engine is equipped with a fan operating at minimum speed, an air cleaner, a muffler and an alternator.
Note (4) - Power in accordance with ISO 14396; Rated Speed = 2000 rpm; VHP Plus = 175 kW (234 HP)
Note (5) - No engine power reduction of up to 3,048 m (10,000 ft) is required.
Height reduction - 10,000 feet in
Base power (1st gear) - net - 183hp
Speed at rated power - 2000 rpm
High - Ambient - 122degrees
Base power (1st gear) - net - metric - 186hp
High ambient temperature - fan speed - maximum - 1650 rpm
Maximum Torque - VHP Plus - 855 pounds
High ambient temperature - fan speed - minimum - 600 rpm
VHP Plus Range - Net - 136-174 kW (183-233 HP)
VHP Plus Range - Clean - Metric - 136-174 kW (186-237 HP)
Torque Rise - VHP Plus - 39%
Standard - Fan Speed - Maximum - 1450 rpm
Standard - Fan Speed - Minimum - 600 rpm
Standard - Ambient - 109degrees
Frame
Front Frame Structure - Height - 12 feet in
Front Frame Structure - Width - 12 feet in
Front Frame Structure - Thickness - 0.6 ft in
Circle - Diameter - 60.2in
Drawbar - Height - 6in
Front Axle - Center Height - 23in
Circle - beam thickness - 1.6in
Front Axle - General Side Swing - 32 degrees
Drawbar - Width - 3in
Front Axle - Wheel Tilt - Left / Right - 18 degrees
Operational
Standard Operating Weight - Front Axle - 9173lb
Standard Operating Weight - Rear Axle - 24183lb
Standard operation weight - total - 33356lb
Maximum Operating Weight - Front Axle - 17908lb
Maximum Operating Weight - Rear Axle - 32967lb
Maximum working weight - total - 50875lb
Fuel tank capacity - 110gal
The volume of fluid in the cooling system - 12.4gal
Hydraulic system volume - 15.9gal
Rear differential / final drive fluid volume - 17.2gal
Transmission Fluid Volume - 1.8gal
Tandem fluid volume (each) - 16.9gal
Power train
Brakes - Parking - Several oil disc
Brakes - Service - Several oil disc
Transmission - Direct drive, gear shift, countershaft
Forward / Reverse Gear - 8 forward / 6 back
Brakes - Secondary - Dual circuit control system
Brakes - Service - Surface Area - 3565in2
Transmission
Gear type - direct drive, gear shift, countershaft
Number of gears - forward - eight
Number of gears - reverse - 6
Max. Speed forward - 29mph
Max. Speed - Reverse - 22.9mph
Steering
Articulation angle - 20degrees
Turning radius - 25.5 feet in
Front axle
Wheel tilt - 18 degrees
Fluctuations - Total - 32 degrees
Ground clearance - 1.9 feet in
Weights
The note - The base operating weight is calculated for the standard configuration of the machine with a 14.00R24 tire with a composite rim, a full fuel tank, coolant, lubricants and an operator.
Gross Vehicle Weight - Usually Equipped - Rear Axle - 30152lb
Gross Vehicle Weight - Usually Equipped - Front Axle - 11716 lbs
Gross Vehicle Weight - Usually Equipped - Total - 41,868 pounds
Working Weight - Typically Included - 41,868 lbs.
Total Vehicle Weight - Base - Total - 36,554 pounds
Gross Vehicle Weight - Typically Equipped - 41,868 pounds
Gross Vehicle Weight - Maximum - Total - 51,893 lbs.
Gross Vehicle Weight - Base - Rear Axle - 26,993 lbs
Gross Vehicle Weight - Base - Front Axle - 9561 lbs
Gross Vehicle Weight - Maximum - Front Axle - 16,606 lbs
Gross Vehicle Weight - Maximum - Rear Axle - 35,287 lbs
Hydraulic system
Pump Type - Variable Piston
Pump flow rate - 55.7 gal / min
Pressure relief valve - 3500 psi Inch
Type of circuit - Electro-hydraulic load measurement, closed center
Note. Pump performance is measured at 2150 rpm.
Maximum System Pressure - 3,500 psi
Pump productivity - 55.7 gal / min
Standby Pressure - 450 psi
Plow blade
Blade Width - 12 ft.
Blade height 24 inches
Blade Thickness - 0.9 Inches
Maximum cutting depth - 28.1 inches
Left Shift - 20.1 inches
Right Shift - 26 inches
Maximum Blade Weight - 45,787.8 lbs.
Blade Width - 12 Feet
Arc radius - 16.3 inches
Throat Cleansing - 6.5 inches
Cutting edge width - 6 inches
Cutting edge thickness 0.6 inches
End bit - 6 inches wide
Finish - Thickness - 0.6 inches
Moldboard - 24 inches high
Moldboard - thickness - 0.9 inches
Moldboard - Width - 12 Feet in
The note - The thrust of the blade is calculated with a thrust coefficient of 0.9, which is equal to the sliding conditions, and the gross vehicle weight (GVW).
Blade Traction - Maximum Gross Weight - 31,758 lbs
Blade Traction - Base Weight - 24,294 lbs
Outlet Pressure - Maximum Gross Weight - 28,503 lbs
Pressure Down - Base Gross Weight - 16,410 pounds
A circle
Diameter - 60.2 inches
Left Shift - 27.4 inches
Shift to the right - 28.7 inches
The maximum departure of external tires - left - 70.5 inches
Maximum Outside Tire Coverage - Right - 77.9 inches
Max elevator above the ground - 18.9 inches
Blade angle - front - 40 degrees
Blade angle - rear - 5 degrees
Dimensions
Height to Isomount Cab Top - 10.8 ft.
Total length - 28.6 feet in
Tire Width - 8.2 Feet in
Wheelbase - 20.1 feet in
Blade Base - 8.4 feet in
The wheelbase of the tandem bridge is 5 feet in
Rear clearance - 1.2 feet in
Front Ground Clearance - 1.9 Feet
Height - Cab Top - 130 ft.
Width - External Rear Tires - 98 inches
Height - Top of Cylinders - 119 inches
Ground clearance - rear axle - 13.3 inches
Width - External Front Tires - 98 inches
Length - Front Axle to Mid Tandem - 241 Inches
Length - 344 inches from front tire to rear of machine
Length - Front Axle to Blade - 100 Inches
Length - between tandem axles - 60 inches
Width - Tire Center Lines - 84 inches
Height - Exhaust Pipe - 121 Inches
Height - Center Front Axle - 23.5 inches
Height - Cab Top Product Link - 133in
Length - Pusher to the Ripper - 399 inches
Length - Pusher Plate to the Ripper - 386 inches
Operational characteristics
Top Speed - Forward - 29 Mph
Top Speed - Reverse - 22.9 mph
Turn Radius - External Front Tires - 25 ft.
Range of rotation - left / right - 47.5 degrees
Joint angle - left / right - 20 degrees
Forward - 8 - 29 miles per hour
Forward - 7 - 19.9 mph
Forward - 6 - 14.5 mph
Forward - 5 - 10.6 miles per hour
Forward - 4 - 6.8 mph
Forward - 3 - 5 miles per hour
Forward - 2 - 3.4 mph
Forward - 1 - 2.5 miles per hour
Reverse - 6 - 22.9 mph
Reverse - 5 - 15.7 mph
Reverse - 4th - 8.4 mph
Reverse - 3rd - 5.4 mph
Reverse - 2nd - 3.7 mph
Reverse - 1 - 2 mph
Standards
Brakes - ISO 3450: 1996
ROPS / FOPS - ISO 3471: 2008, ISO 3449: 2005 Level II
Sound - ISO 6394: 2008, ISO 6395: 2008
Note (1)
The static sound pressure level of the operator, measured in accordance with ISO 6394: 2008 for the cab offered by Caterpillar, with proper installation, maintenance and testing with closed doors and windows and a hydraulic fan at maximum speed is 74 dB (A).
Steering - ISO 5010: 2007
Top-up Service
Cooling system - 10.6 gal
Engine oil - 6.6 gal
Hydraulic system - Tank - 16.9 gal
Tandem Housing - each - 16.9 gal
Hard Drive - 1.8gal
Front wheel spindle bearing housing - 0.2gal
Fuel tank capacity - 110 gal
Transmission - Differential - Final drives - 16.9 gal
Blade range
Circle Shift - Right - 28.7 inches
27.4-inch left-hand shift
Midsboard Sideshift - Right - 26 inches
Lateral shift, left - 20.1 inches
Range of blade tip - forward - 40 degrees
Blade tip range - back - 5 degrees
The maximum shoulder extension outside the tires - on the right - 77.9 inches
Maximum shoulder reach outside the tires - left - 70.5 inches
The maximum rise above the ground - 18.9 inches
Maximum cutting depth - 28.1 inches
Maximum blade angle - 90 degrees
Baking powder
Back - Scarifier Shank Holders - 9
Mid, V-Type - Scarifier Shank Holders - 11
Front, V-shaped, 5 or 11 tooth - Working width - 47.4 inches
Front, V-shaped, 5 or 11 tooth - scarification depth, maximum - 18.4 inches
Front, V-shaped, 5 or 11 tooth - Scarifier shank holders - 5, 11
Front, V-shaped, 5 or 11 tooth - The distance between the holders of the scarifier shank is 4.6 inches
Medium V-Type - Working Width - 46.6 inches
Medium, V-type - scarification depth, maximum - 11.5 inches
Medium V-Type - Distance between Scarifier Shank Holders - 4.6 inches
Back - Working Width - 91 Inches
Behind - scarification depth, maximum - 10.5 inches
Rear - 10.5-inch spacing between the holders of the scarifier shank
Tandems
Height - 19.9 inches
Width - 7.9 inches
Sidewall Thickness - Inner - 0.6 inches
Sidewall Thickness - Outer - 0.7 Inches
Drive Chain Pitch - 2 Inches
The distance between the axles of the wheels - 60 inches
Tandem Swing - Forward-Up - 15 degrees
Tandem Swing - Forward-Down - 25 Degrees
Net Power - VHP Plus
Equipment - Forward 1 - 183hp
Equipment - Forward 2 - 188hp
Movement - Forward 3rd - 203hp
Transmission - forward 4th - 208hp
Equipment - Forward 5 - 213hp
Equipment - Forward 6 - 218hp
Equipment - Forward 7 - 233 HP
Equipment - forward 8th - 233 hp
Movement - 1st Reverse - 183hp
Movement - 2nd Reverse - 188hp
Transmission - reverse 3-6 - 203 hp