Caterpillar MINI HYDRAULIC EXCAVATOR 349F LXE - catalog of spare parts

type: MINI HYDRAULIC EXCAVATOR;

model: 349F LXE;

Engine

Displacement - 763cu in

Boring - 5.2in

Stroke - 6.2in

Net Power - SAE J1349 - 417hp

Full power - SAE J1995 - 432hp

Engineering model - Cat C13 ACERT

Clean Flywheel Power - 417hp

Choose MINI HYDRAULIC EXCAVATOR 349F LXE section:

1114839	Strap	Caterpillar	View
4I3038	Washer	Caterpillar	View
1261768	Socket	Caterpillar	View
3664622	Kit Service	Caterpillar	View
8C6965	Hex Socket Head Bolts	Caterpillar	View
1636803	Plug Connector	Caterpillar	View
0951596	Oring	Caterpillar	View
6V8523	Hose	Caterpillar	View
8T0122	Nut Full	Caterpillar	View
1163510	Plug	Caterpillar	View
1702512	Switch Gp Toggle	Caterpillar	View
6V5215	Hex Head Bolts, Phosphate and Oil Coated	Caterpillar	View
5C7261	, Hex Nuts, Zinc Plated	Caterpillar	View
1552255	Kit Connecting Plug	Caterpillar	View
6V8932	Set Screws Cup Point	Caterpillar	View
3E6730	Oring	Caterpillar	View
0951716	Oring	Caterpillar	View
1032529	Hose	Caterpillar	View
5P6944	Adapter	Caterpillar	View
7Y3965	Tube	Caterpillar	View
3B8485	Fitting Grease	Caterpillar	View
1261866	Spring	Caterpillar	View
0930122	Shim	Caterpillar	View
3698507	Plug ORing	Caterpillar	View
0951388	Standard Clamp	Caterpillar	View
1004336	Clip	Caterpillar	View
1P0810	Vinyl Tape	Caterpillar	View
1243953	Washer	Caterpillar	View
1673593	Strap	Caterpillar	View
1659552	Pushrod	Caterpillar	View
6W6005	Hold Down Battery	Caterpillar	View
8T7971	, Flat Washer, Zinc Flake	Caterpillar	View
1673543	Terminal	Caterpillar	View
9X8600	Oring	Caterpillar	View
1358578	Bolt As	Caterpillar	View
0951576	Oring	Caterpillar	View
7X0584	, Flat Washer, Zinc Flake	Caterpillar	View
0338248	Clip	Caterpillar	View
2U2552	Lockwasher	Caterpillar	View
1797616	Reduced Outside Diameter Thermoplastic Hose Assembly	Caterpillar	View
1342540	Resistor As	Caterpillar	View
1H8278	Oring	Caterpillar	View
2457895	Kit Clip	Caterpillar	View
4I9527	Band Marker	Caterpillar	View
2397356	Plug As Connector	Caterpillar	View
8T2353	Adapter	Caterpillar	View
1184728	Elbow	Caterpillar	View
0996137	Washer	Caterpillar	View
0874531	Reduced Outside Diameter Thermoplastic Hose Assembly	Caterpillar	View
3E8320	Plate Instruction	Caterpillar	View
1613128	Relay	Caterpillar	View
6I5342	Nut	Caterpillar	View
0963216	Set Screws Cup Point	Caterpillar	View
1892690	Handle	Caterpillar	View
3T4688	Terminal Ring	Caterpillar	View
1211022	Diode	Caterpillar	View
4I4361	Retainer	Caterpillar	View
5D1026	Standard (Worm Drive)	Caterpillar	View
1282135	Screw Truss Head	Caterpillar	View
0950841	Pin Cotter	Caterpillar	View

Specifications

Swing mechanism

Swing speed - 8.5rpm

Torque - 109500 pounds

Weights

The note

FIX long running gear, 6.9 m (22`8 ") boom, HD handle R3.35TB HD (11`0"), counterweight to 9.0 m (9.9 tonnes), Long FIX running gear, 3.1 m3 (4.1 yards), bucket, 600 mm (24 ") double boots.

Weight Limit - 113600lb

Minimum weight - 108300lb

Hydraulic system

Pilot System - Maximum Flow - 6.9 gallons / min

Pilot system - maximum pressure - 598 psi

Maximum pressure - travel - 5080 psi

Maximum pressure - swing - 3990 psi

Swing System - Maximum Flow - 99 gallons / min

Boom Cylinder - Hole - 6.7in

Boom Cylinder - Stroke - 60in

Stick cylinder - hole - 7.5in

Stick Cylinder - Stroke - 69.3in

Main system - maximum flow - total - 198 gpm

Maximum pressure - equipment - 5080 psi

Maximum Pressure - Equipment - Lifting Mode - 5510 psi

TB cylinder family bucket - stroke - 53.4in

TB Bucket Cylinder - Boredom - 6.3in

Service replenishment options

Cooling system - 13.2gal

Def tank - 10.8gal

Last ride - every - 4gal

Hydraulic tank - 108gal

Hydraulic system - including tank - 151gal

The note - Diesel exhaust fluid (DEF) must meet the requirements set out in ISO 22241.

Fuel tank capacity - 190gal

Swing Drive - every - 2.6gal

Engine oil - with filter - 10gal

Standards

Cab - ROPS - ISO 12117-2

Brakes - ISO 10265

Cabin / FOGS - SAE J1356

Sound performance

Operator Noise (Closed) - ISO 6396 - 69 dB (A)

Viewer noise - ISO 6395 - 106 dB (A)

Note (1)

When properly installed and maintained, the cab offered by Caterpillar, when tested with closed doors and windows in accordance with ANSI / SAE J1166 OCT98, complies with OSHA and MSHA requirements for operator noise exposure limits at the time of manufacture.

Note (2)

Hearing protection may be required when working with an open operator station and cabin (if they are not properly serviced or doors / windows open) for an extended period of time or in a noisy environment.

Track

The number of blocks - on each side - Long Fix chassis - 52

Number of track rollers - on each side - Long Fix chassis - 9

The number of bearing rollers - on each side - Long Fix undercarriage - 2

Drive unit

Maximum travel speed - 2.9mph

Maximum tractive effort - 75300lb