Caterpillar MATERIAL HANDLER 313D2 GC - catalog of spare parts
Utility contractors and other users find the Cat® 313D2 GC to be the perfect balance of performance, size, and low cost of ownership and operation. Legendary reliability is combined with excellent fuel efficiency, optimized hydraulic pumps and versatility to solve a wide range of tasks at the construction site.
Choose MATERIAL HANDLER 313D2 GC section:
POWERFUL EFFICIENCY
-
It is configured to operate at a maximum speed of 1650 rpm with an engine power of 55 kW (74 hp) - all this allows you to burn 15% less fuel compared to 313D2.
-
A low-pressure fuel system with an electrically controlled regulator allows the engine to be more resistant to poor quality fuel.
-
Efficient hydraulic pumps provide optimum power for general construction applications.
PURPOSE-CREATED CATTING TIPS
-
On-site preparation and finishing work is quick and easy thanks to the wide range of Cat work tools.
-
Fast and flawless operation with bucket and Cat compactor.
-
The connector allows you to switch between attachments in a matter of seconds without leaving the cab.
-
See the complete attachment line for your machine at www.cat.com/attachments.
BUILT-IN SAFETY FEATURES
-
The hydraulic actuation lever reliably blocks all hydraulic functions.
-
Anti-skid and countersunk bolts reduce slip in difficult conditions and during routine inspections.
-
A full-length firewall separates the pump bay from the engine.
-
The engine ground switch turns off the engine in an emergency.
CREATED FOR IMPLEMENTATION
-
The modified X-frame structure ensures a long service life.
-
Robotic welded booms and arms with internal baffles are standard.
-
A greased track between pins and bushings increases the service life of the undercarriage and reduces noise.
DEVELOPED FOR OPERATORS
-
The cabin has an ergonomic design with easily accessible controls.
-
Several options for adjusting the seat and joystick increase comfort.
-
Excellent visibility from the cockpit improves productivity and safety.
-
Easy joystick control reduces operator fatigue.
-
Automatic climate control system with 10 air vents for maximum comfort.
REDUCED SERVICE TIME
-
Most service points can be accessed from ground level.
-
The fuel filtration system has two filters, both located in the radiator compartment, rather than three filters, as in the 312D, which reduces operation and maintenance costs and simplifies maintenance.
-
Remotely installed filters reduce machine maintenance time.
-
Pressure taps and S · O · Sports help increase uptime.
PRODUCTIVITY WITH TECHNOLOGY
-
Cat Connect technology solutions increase production and minimize operating costs.
-
Link technologies provide wireless connectivity to your workplace by providing important business information (VisionLink®, Product Link ™).
ENGINE
|
Engine Model |
C4.4 |
|
Flywheel Power |
91.0 HP |
|
Bore |
4.13 in |
|
Stroke |
5.0 in |
|
Displacement |
269.0 in³ |
|
Net Power - ISO 14396 |
100.0 HP |
|
Net Power - SAE J1349/ISO 9249 |
91.0 HP |
|
Emissions |
Cat C4.4 engine meets U.S. EPA Tier 3, EU Stage IIIA equivalent and China Nonroad Stage III emission standards. |
|
Engine Power - 1,650 rpm |
74.0 HP |
|
Note (1) |
Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, muffler and alternator. |
|
Note (2) |
No engine derating required below 2300 m (7,545 ft) altitude. |
WEIGHTS
|
Operating Weight |
28880.0 lb |
|
Operating Weight - Standard Undercarriage - Operating Weight* |
27558.0 lb |
|
Operating Weight - Standard Undercarriage - Operating Weight** |
28880.0 lb |
|
Note (1) |
*4.65 m (15`3") Reach Boom, R2.5 (8`2") Stick, 500 mm (20") Triple Grouser Track Shoes, GD 0.53 m3 (0.69 yd3) Bucket (500 kg/1,100 lb) |
|
Note (2) |
**4.65 m (15`3") Reach Boom, R2.5 (8`2") Stick, 770 mm (30") Triple Grouser Track Shoes, GD 0.53 m3 (0.69 yd3) Bucket (500 kg/1,100 lb) |
SWING MECHANISM
|
Swing Torque |
22791.0 lb/ft |
|
Swing Speed |
11.2 r/min |
DRIVE
|
Maximum Drawbar Pull |
25630.0 lb |
|
Maximum Travel Speed |
3.2 mile/h |
HYDRAULIC SYSTEM
|
Main System - Maximum Flow - Total |
61.0 gal/min |
|
Maximum Pressure - Equipment |
4420.0 psi |
|
Maximum Pressure - Swing |
3340.0 psi |
|
Maximum Pressure - Travel |
5080.0 psi |
|
Pilot System - Maximum Flow |
1340.0 in³/min |
|
Pilot System - Maximum Pressure |
600.0 psi |
|
Boom Cylinder - Bore |
4.0 in |
|
Boom Cylinder - Stroke |
40.0 in |
|
Bucket Cylinder - Bore |
4.0 in |
|
Bucket Cylinder - Stroke |
37.0 in |
|
Stick Cylinder - Bore |
5.0 in |
|
Stick Cylinder - Stroke |
47.0 in |
|
Swing System - Maximum Flow |
31.0 gal/min |
DIMENSIONS - REACH BOOM - 4.65 M (15`3
|
Cab Height |
9.08 ft |
|
Cab Height - With Top Guard |
9.5 ft |
|
Counterweight Clearance** |
2.92 ft |
|
Ground Clearance |
1.42 ft |
|
Length - Center of Rollers - Standard Undercarriage*** |
9.08 ft |
|
Shipping Height - With Guard Rail |
9.25 ft |
|
Shipping Height* |
9.25 ft |
|
Shipping Length - Standard Undercarriage with Blade*** |
25.67 ft |
|
Shipping Length - Standard Undercarriage*** |
25.0 ft |
|
Tail Swing Radius |
7.0 ft |
|
Track Gauge |
6.5 ft |
|
Track Length - Standard Undercarriage*** |
11.42 ft |
|
Transport Width - 500 mm (20 in) Shoes |
8.17 ft |
|
Transport Width - 770 mm (30 in) Shoes |
9.08 ft |
|
Note (1) |
*Including shoe lug height. |
|
Note (2) |
**Without shoe lug height. |
|
Note (3) |
***Offering varies for different regions. |
WORKING RANGES - REACH BOOM - 4.65 M (15`3
|
Maximum Cutting Height |
27.83 ft |
|
Maximum Digging Depth |
18.17 ft |
|
Maximum Loading Height |
20.0 ft |
|
Maximum Reach - Ground Level |
26.83 ft |
|
Maximum Vertical Wall Digging Depth |
16.08 ft |
|
Minimum Loading Height |
6.58 ft |
|
Note |
All dimensions and working ranges based on 0.53 m3 (0.69 yd3) capacity GD bucket with 1200 mm (3`11") tip radius. |
|
Maximum Depth Cut for 2440 mm (8`0") Level Bottom |
17.5 ft |