Caterpillar INTEGRATED TOOLCARRIER IT38G II - catalog of spare parts
Dimensions
Ground clearance - 1.4 feet to
Wheelbase - 10 feet in
Height - Top ROPS - 10.9 feet in
Height - Top of the exhaust pipe - 127.1in
Center line from rear axle to counterweight edge - 73.1in
Center line from rear axle to hitch - 59.4in
Height - Top Hood - 92.9in
B-Pin Height - Standard - 13.4 feet in
Choose INTEGRATED TOOLCARRIER IT38G II section:
Specifications
Engine
Displacement - 439cu in
Boring - 4.3in
Stroke - 5in
Net Power - ISO 9249 - 180hp
Engineering model - Cat? 3126B ATAAC
Flywheel Power - 160hp
Maximum flywheel power - 180hp
Total torque increase - 62%
Peak Torque - 1,400 rpm - Net - 619 pounds
Transmission
Forward - 1 - 4.7mph
Forward - 2 - 8.3mph
Forward - 3 - 14.5mph
Forward - 4 - 24.1mph
Reverse - 1 - 4.7mph
Reverse - 2 - 8.3mph
Reverse - 3 - 14.5mph
Weights
Operating weight - 32156lb
Tires
Tires - Choose from a variety of tires to suit your application.
Buckets
Maximum bucket capacity - 3.5yd3
Bucket capacity - 2.21-2.8 m3 2.75-3.5 m3
Hydraulic system
Hydraulic Cycle Time - Total - 10.7 s
Hydraulic cycle time - lower, empty, float - 2.9 s
Hydraulic Cycle Time - Increase - 5.8 s
Pilot System - Pump Performance - 26.9 gpm
Bucket / Tool System - Safety Valve Setting - 3597 psi
Hydraulic Cycle Time - Dump - 2 s
Axes
Front - Fixed front - Rear - Hesitant +/- 12?
Maximum rise and fall on one wheel - 16.5in
The brakes
The brakes - Meets the required standards.
Performance characteristics
Static Tipping Load - Full Turn - 19106lb
Separation force - 24750lb
Service replenishment options
Cooling system - 11.4gal
Carter - 7.9gal
Hydraulic tank - 20.1gal
Hydraulic system - including tank - 23.8gal
Fuel tank - standard - 67.9gal
Transmission - 7.9gal
Differential - Final Drives - Front - 6.3gal
Differential - Last gear - Rear - 7.1gal
Taxi
ROPS / FOPS - Conforms to SAE and ISO standards.