Caterpillar EARTHMOVING COMPACTOR 836K - catalog of spare parts
At 535 HP and over 123,000 lb. operating weight, the 836K Landfill Compactor leads the class in reliability, performance, safety, operator comfort, serviceability, and efficiency. From a family of machines with over 20 years of landfill experience, the 836K is powered with field-proven technologies to keep operations running at their peak. Reduces wheel slip without reducing hydraulic efficiency.
Increases fuel efficiency thanks to a lock-up clutch torque converter providing direct drive.
The Integrated Steering and Transmission Control System (STIC ™) improves operator comfort by combining the steering and transmission functions in one lever. Includes finger guided gear selection. Integrated low-force controls provide faster cycles and help reduce operator fatigue. The 836K steering system provides precise machine control thanks to a load-sensing hydraulic steering system.
Choose EARTHMOVING COMPACTOR 836K section:
POWERFUL EFFICIENCY
The impeller clutch torque converter (ICTC) reduces wheel slip and tip wear, modulating the rim tension from 100 to 20 percent when you depress the left pedal. After reaching 20% āāof the rim of the rim, the left pedal turns on the brake.
Provides increased efficiency through the use of variable displacement piston pumps.
Provides precise positioning for convenient operation in hard-to-reach places with a rotation angle of 43 degrees in each direction.
Electro-hydraulic control improves productivity thanks to responsive attachments. Work comfortably with easy-to-use soft latching controls.
Variable displacement hydraulic piston pumps increase efficiency with new attachments and steering systems.
LONG TERM VALUE AND LONGNESS
Designed and manufactured from specially constructed structures to remain safe and durable in the long term.
Rear frame full box section resists torsional shocks and twisting.
Heavy-duty steering column bearings effectively carry the steering load into the frame.
The mounting of the axle, lower hitch pin, frame and bearing size has been increased to increase the service life.
WORKING WITH LESS FUEL
An advanced electronic performance management system (APECS) ensures smooth switching and efficiency with built-in electronic controls.
The strategic use of metallurgy and heat treatment ensures the durability of gear wheels.
The Cat C18 engine is engineered to maximize fuel efficiency and power density.
Two engine options are available to meet Level 4 Final / Stage IV / Korea Tier 4 Final or Tier 3 / Stage IIIA standards. (depending on the market).
Integrated systems intelligently reduce engine speed and reduce overall system thermal loads, resulting in improved performance and fuel efficiency.
Turning off the engine at idle speed reduces fuel consumption during periods of idling.
Delay off the engine increases service life.
WHEEL ADVICE CREATED FOR IMPLEMENTATION
New durable design options Paddle and Plus.
Service life increased by 40%.
Designed for Cat Landfill compactors.
Improved machine performance.
Improved traction.
Wear life longer.
Four new wheel and tip configurations to meet your needs: a paddle tip for traction and fuel economy, plus a tip for greater stability on the side slopes, a combination of both for optimizing performance in your conditions or a diamond tip for the longest tip on the market and reputation to match.
OPERATOR COMFORT AND CONTROL
The cab under pressure sits on insulating supports, which increases comfort and reduces noise.
The cabin is equipped with a convenient storage box / breakfast box.
The Cat Comfort Series III seat includes a mid-back design, thick contoured cushions, air suspension, adjustable in six directions, as well as a seat-mounted tool rest and STIC steering that moves with the seat for optimal control.
The control panel provides operators with information and controls for safer, time-saving settings.
The simplicity of the STIC control ensures maximum responsiveness and control thanks to STIC, which combines the choice of direction, gear selection and steering in one lever.
PRODUCTIVITY WITH TECHNOLOGY
The Cat seal monitoring system uses Power Drive Power (MDP) technology to measure rolling resistance and relates it to a seal on a landfill. Three-dimensional mapping shows where to work and when layers have optimal density. The system eliminates voids, optimizes cell space and documents the results.
VisionLink 3D Project Monitoring provides managers with a detailed compaction analysis for more efficient monitoring and management of operations.
DETECT technologies help ensure the safety of people and equipment by informing the operator about the work area, as well as tracking and reporting unsafe conditions such as warning zones.
COMPACT technologies combine advanced compaction measurement, cockpit guidance, and reporting capabilities that help you consistently, quickly, and evenly achieve compaction targets in fewer passes.
The rear view camera significantly improves visibility behind the car, helping the operator to work with greater confidence and with maximum potential, while maintaining the safety of people and property.
Product Link is deeply integrated into your machine, giving you access to information such as car location, hours of operation, fuel consumption, idle time and event codes via the VisionLink online interface. Helps to effectively manage the park and reduce operating costs.
BUILT-IN SAFETY FEATURES
Railings, stairs and non-slip surfaces increase the safety of technicians and operators.
A rearview camera with a monitor in the cab boosts operator awareness around the car.
Vibration reduction for the operator due to insulated cab supports and seats, attachments and controls
Low sound level in the cabin.
Sealed cabin with filtered air.
Protection of the engine and power transmission prevents the accumulation of debris and protective elements.
The front frame protection prevents debris from accumulating inside the frame and protects components and hydraulic lines.
Winding the axles and protecting the seal prevent material from winding and tying around the axes and help with the need for cleaning.
The transmission oil tube is protected from damage from debris.
The fuel tank is located away from debris in the front frame and is easily accessible.
The high air intake of the radiator with screen helps to prevent debris from entering the radiator area, maintaining proper air flow and preventing debris from entering.
Shock strips and extra scrub pins are located at the front and rear of the rear wheels and behind the front wheels. Impact plates help protect the wheels from debris, helping the tips of the wheels maintain a good seal.
Additional cleaning fingers are available in bonding material or in tough packing conditions, which additionally help to keep the tips of the wheels clean.
The roof passes by the cab doors and windows to minimize the accumulation of debris.
The suction fan allows the ambient air to cool, increasing the cooling capacity. It also creates pressure in the engine compartment, preventing the accumulation of debris.
REDUCED ENVIRONMENTAL IMPACT
More economical than the previous model.
Turning the engine off at idle can help you save fuel by avoiding unnecessary idling.
Model 836K is designed to restore, which increases the service life of the machine and minimizes the impact on the environment. Get the most out of your investment with our sustainable options, including Cat Reman and Certified Rebuild. Thanks to these programs, recovered components provide cost savings of 40–70 percent, reducing operating costs as well as reducing waste and minimizing the need for raw materials.
TOP TIER SERVICE AND SUPPORT
Safe and convenient service through ground or platform access to daily service points.
Flap fan at ground level for easy inspection and cleaning.
Swing doors on both sides of the engine compartment provide easy access to daily maintenance checks.
Ecology effluent for ease of maintenance and spill prevention.
Reduce downtime with VIMS ™ system notifications so operators and technicians can solve problems before a crash.
Inspection markers mean quick visual inspection and minimize fluid contamination.
Sealed engine compartment with temperature control prevents the entry of small particles and prevents extreme temperatures in the compartment.
Cat dealers can help you with preventative maintenance programs, maintenance contracts, best-in-class parts and support for operator training.
ENGINE
Gross Power |
562.0 HP |
Net Power |
496.0 HP |
Engine Model |
Cat® C18 ACERT™ |
Bore |
5.71 in |
Stroke |
7.2 in |
Displacement |
1104.5 in³ |
Emissions |
Tier 4 Final/Stage IV/Korea Tier 4 Final or Tier 3/Stage IIIA equivalent |
Gross - SAE J1349 |
562.0 HP |
High Idle Speed |
2120.0 r/min |
Low Idle Speed |
750.0 r/min |
Maximum Altitude - Without Derating |
7500.0 ft |
Maximum Gross Torque - 1,300 rpm |
2275.0 ft·lbf |
Net Power - SAE J1349 - Converter Drive - Gross Power |
496.0 HP |
Net Power - SAE J1349 - Converter Drive - Torque Rise |
52.0 % |
Net Power - SAE J1349 - Direct Drive - Gross Power |
496.0 HP |
Net Power - SAE J1349 - Direct Drive - Torque Rise |
52.0 % |
Rated Power (Lab) |
555.0 HP |
Rated Power (Net ISO 14396) |
553.0 HP |
TRANSMISSION
Transmission Type |
Planetary – Powershift – ECPC |
Travel Speed - Forward - Converter 1st |
3.9 mile/h |
Travel Speed - Forward - Converter 2nd |
6.8 mile/h |
Travel Speed - Forward - Lockup 1st |
4.0 mile/h |
Travel Speed - Forward - Lockup 2nd |
7.3 mile/h |
Travel Speed - Reverse - Converter 1st |
4.0 mile/h |
Travel Speed - Reverse - Converter 2nd |
6.5 mile/h |
Travel Speed - Reverse - Lockup 1st |
4.3 mile/h |
Travel Speed - Reverse - Lockup 2nd |
7.6 mile/h |
HYDRAULIC SYSTEM
Bore (1) |
5.0 in |
Bore (2) |
5.5 in |
Hydraulic System |
Flow Sharing Implement |
Lift System |
Double Acting Cylinder |
Main Relief Pressure |
3495.0 psi |
Maximum Supply Pressure |
4640.0 psi |
Pump Flow at 2,006 rpm |
66.0 gal/min |
Steering System |
Double Acting – End Mounted |
Stroke (1) |
29.1 in |
Stroke (2) |
40.2 in |
Vehicle Articulation Angle |
86° |
AXLES
Front |
Planetary – Fixed |
Oscillation Angle |
13° |
Rear |
Planetary – Oscillating |
BRAKES
Control System |
Full Hydraulic Split Circuit |
Parking Brake |
Spring Applied, Hydraulic Released |
SERVICE REFILL CAPACITIES
Fuel Tank |
209.0 gal (US) |
Cooling System |
28.0 gal (US) |
Crankcase |
16.0 gal (US) |
Transmission |
32.0 gal (US) |
Diesel Engine Fluid Tank (Tier 4 Final/Stage IV/Korea Tier 4 Final) |
9.0 gal (US) |
Differential - Final Drives - Front |
49.0 gal (US) |
Differential - Final Drives - Rear |
50.0 gal (US) |
Hydraulic System - Tank Only |
63.0 gal (US) |
WEIGHTS
Operating Weight |
123319.0 lb |
CAB
Exterior Sound Level - Standard |
111.0 dB(A) |
Exterior Sound Level - Suppression |
109.0 dB(A) |
Interior Sound Level - Standard |
72.0 dB(A) |
Interior Sound Level - Suppression |
71.0 dB(A) |
OPERATING SPECIFICATIONS
Maximum Operating Weight (Tier 3/Stage IIIA equivalent) - Multiple Blade and Wheel Offerings |
122615.0 lb |
Maximum Operating Weight (Tier 4 Final/Stage IV/Korea Tier 4 Final) - Multiple Blade and Wheel Offerings |
123319.0 lb |
Operating Weight - With Full Tank Capacities and U-Blade (Tier 3/Stage IIIA Equivalent) |
122615.0 lb |
Operating Weight - With Full Tank Capacities and U-Blade (Tier 4 Final/Stage IV/Korea Tier 4 Final) |
123319.0 lb |
DIMENSIONS (APPROXIMATE)
Height - Top of Cab with A/C |
15.27 ft |
Height - Top of Exhaust Pipe |
15.12 ft |
Height - Top of Hood |
11.22 ft |
Ground Clearance - Bumper |
3.38 ft |
Centerline of Rear Axle to Edge of Counterweight |
10.46 ft |
Hitch to Centerline of Front Axle |
7.46 ft |
Wheel Base |
14.93 ft |
Width - Over Wheels |
14.04 ft |
Height - ROPS/Canopy |
14.06 ft |
Height - Top of Cab with Strobe |
15.9 ft |
Length - With Blade on Ground - Straight Blade |
33.41 ft |
Turning Radius - Inside of Wheels |
11.93 ft |
Ground Clearance |
2.07 ft |
HYDRAULIC SYSTEM - STEERING
Maximum Flow at × rpm |
52 L/min @ 2,006 rpm |
Steering Pressure Limited |
3495.0 psi |
Steering System - Circuit |
Steering Double Acting – End Mounted |
Steering System - Pump |
Piston – Variable Displacement |
Total Steering Angle |
86 degrees |
WHEELS AND TIPS
Diameter - With Tips |
7.0 ft |
Drum Diameter |
5.81 ft |
Drum Width |
4.59 ft |
Tips per Wheel |
40 |
Dimensions
Length With Blade on Ground 33.41ft in
Width Over Wheels 14.04ft in
Height to Top of Cab 15.27ft in
Wheelbase 14.93ft in
Ground Clearance 2.07ft in
Dimensions (Approximate)
Ground Clearance 2.07ft in
Engine
Engine Make
2236
Engine Model
C18 Acert
Gross Power
562hp
Net Power
496hp
Displacement
1104.5cu in
Max Torque
2275lb ft
Bore
5.8in
Stroke
7.2in
Emissions
Tier 4 Final/Stage IV/Korea Tier 4 Final or Tier 3/Stage IIIA equivalent
Engine Model
Cat C18 ACERT
High Idle Speed
2120rpm
Low Idle Speed
750rpm
Maximum Altitude - Without Derating
7500ft in
Gross - SAE J1349
562hp
Rated Power (Lab)
555hp
Rated Power (Net ISO 14396)
553hp
Net Power - SAE J1349 - Direct Drive - Gross Power
496hp
Net Power - SAE J1349 - Direct Drive - Torque Rise
52 %
Net Power - SAE J1349 - Converter Drive - Gross Power
496hp
Net Power - SAE J1349 - Converter Drive - Torque Rise
52 %
Maximum Gross Torque - 1,300 rpm
2275lb ft
Operational
Operating Weight
123319lb
Fuel Capacity
209gal
Hydraulic System Fluid Capacity
63gal
Cooling System Fluid Capacity
28gal
Transmission Fluid Capacity
32gal
Transmission
Transmission Type
Planetary Powershift ECPC
Transmission Type
Planetary - Powershift - ECPC
Number of Forward Gears
4
Number of Reverse Gears
4
Travel Speed - Forward - Converter 1st
3.9mph
Travel Speed - Forward - Lockup 1st
4mph
Travel Speed - Forward - Converter 2nd
6.8mph
Travel Speed - Forward - Lockup 2nd
7.3mph
Travel Speed - Reverse - Converter 1st
4mph
Travel Speed - Reverse - Lockup 1st
4.3mph
Travel Speed - Reverse - Converter 2nd
6.5mph
Travel Speed - Reverse - Lockup 2nd
7.6mph
Weights
Operating Weight
123319lb
Hydraulic System
Maximum Supply Pressure
4640 psi
Main Relief Pressure
3495 psi
Stroke (1)
29.1in
Hydraulic System
Flow Sharing Implement
Pump Flow at 2,006 rpm
66 gal/min
Steering System
Double Acting End Mounted
Bore (1)
5in
Vehicle Articulation Angle
86 degrees
Bore (2)
5.5in
Stroke (2)
40.2in
Lift System
Double Acting Cylinder
Axles
Front
Planetary Fixed
Rear
Planetary Oscillating
Oscillation Angle
13 degrees
Brakes
Parking Brake
Spring Applied, Hydraulic Released
Control System
Full Hydraulic Split Circuit
Dimensions
Length with Blade on Ground
33.5ft in
Width Over Wheels
14.1ft in
Height to Top of Cab
15.3ft in
Wheelbase
15ft in
Ground Clearance
2.1ft in
Operating Specifications
Maximum Operating Weight (Tier 3/Stage IIIA equivalent) - Multiple Blade and Wheel Offerings
122615lb
Operating Weight - With Full Tank Capacities and U-Blade (Tier 4 Final/Stage IV/Korea Tier 4 Final)
123319lb
Operating Weight - With Full Tank Capacities and U-Blade (Tier 3/Stage IIIA Equivalent)
122615lb
Maximum Operating Weight (Tier 4 Final/Stage IV/Korea Tier 4 Final) - Multiple Blade and Wheel Offerings
123319lb
Service Refill Capacities
Cooling System
28gal
Fuel Tank
209gal
Crankcase
16gal
Transmission
32gal
Differential - Final Drives - Front
49gal
Differential - Final Drives - Rear
50gal
Hydraulic System - Tank Only
63gal
Diesel Engine Fluid Tank (Tier 4 Final/Stage IV/Korea Tier 4 Final)
9gal
Dimensions (Approximate)
Ground Clearance
2.1ft in
Wheel Base
15ft in
Height - Top of Exhaust Pipe
15.2ft in
Hitch to Centerline of Front Axle
7.5ft in
Ground Clearance - Bumper
3.4ft in
Width - Over Wheels
14.1ft in
Height - Top of Hood
11.3ft in
Centerline of Rear Axle to Edge of Counterweight
10.5ft in
Height - ROPS/Canopy
14.1ft in
Height - Top of Cab with A/C
15.3ft in
Length - With Blade on Ground - Straight Blade
33.5ft in
Height - Top of Cab with Strobe
15.9ft in
Turning Radius - Inside of Wheels
12ft in
Hydraulic System - Steering
Steering System - Circuit
Steering Double Acting End Mounted
Steering System - Pump
Piston Variable Displacement
Total Steering Angle
Steering Pressure Limited
3495 psi
Maximum Flow at rpm
52 L/min @ 2,006 rpm
Cab
Interior Sound Level - Standard
72 dB(A)
Interior Sound Level - Suppression
71 dB(A)
Exterior Sound Level - Standard
111 dB(A)
Exterior Sound Level - Suppression
109 dB(A)
Wheels and Tips
Drum Width
4.6ft in
Drum Diameter
5.9ft in
Diameter - With Tips
7ft in
Tips per Wheel
40