Caterpillar EARTHMOVING COMPACTOR 826G II - catalog of spare parts
Dimensions
Wheelbase - 145.7 feet to
Height - top of exhaust pipe - 12.6 feet to
Length - with a blade on the ground - 27.2 feet to
Width - above the wheels - 12.5 feet in
Height - hood top - 8.9 feet to
Centerline from the rear axle to the edge of the counterweight - 8.7 feet to
Centerline from rear axle to hitch - 6.1 feet to
Width - above the end bits - blade - 14.8 feet to
Height - top of the cabin with air conditioning - 13.8 feet to
Turning radius - inside - 10.6 feet to
Turning radius - outside - 24.1 feet to
Ground clearance - Counterweight - 3.4 feet to
Height - Ladder - 2.4 feet to
Taxi
ROPS / FOPS - Conforms to SAE and ISO standards.
Choose EARTHMOVING COMPACTOR 826G II section:
Specifications
Engine
Gross power - 380HP
Torque boost - 28%
Displacement - 893cu in
Boring - 5.4in
Stroke - 6.5in
Net power - ISO 9249 - 340hp
Engineering model - Cat 3406E ATAAC Diesel
Flywheel power - 340hp
EEC 80/1269 - 340hp
Peak torque - 200 rpm - net - 1232.5 pounds
SAE J1349 - 340hp
ISO 3046-2 net power - 340hp
DIN 70020 - 327 hp
Transmission
Forward - 1 - 3.6mph
Forward - 2 - 6mph
Reverse - 1 - 4.1mph
Reverse - 2 - 6.6mph
Hydraulic system
Installation of safety valve - 3500 psi
Cylinder lifting cylinder x stroke - 114.3 mm x 576 mm 4.49 x 22.68 inches
Blade pump power at 2000 rpm and 6900 kPa (1000 psi.) - 26.5 gallons / min
Axles
Front - Planetary - Fixed
Oscillating rear - Planetary - fluctuation 5 degrees
Brakes
Standards - Meet OSHA, SAE J1473 Dec 84, ISO 3450-1985 standards.
Service replenishment options
Cooling system - 21.9gal
Fuel tank - 166.5gal
Carter - 9gal
Hydraulic tank - 23.2gal
Transmission - 16.4gal
Differential - Final drives - Front - 23.8gal
Differential - Last gear - Rear - 23.8gal
Sound performance
Standards - Complies with ANSI / SAE and ISO standards.
Straight blade
Growth - 6.3 feet to
Width - Above End Bits - 14.8 feet to
Moldboard - Length - 14.1 feet to
Lifting speed at nominal speed - 1.42 ft / s
Bits (2), Self-sharpening, Length - Each - 19in
Cutting edges (2), reversible, end section length (each) - 5.9 feet to
Bits (2), Self-sharpening, Width x Thickness - 254 mm x 25 mm 10 inches x 1 inch
Cutting edges (2), reversible, width x thickness - 254 mm x 25 mm 10 inches x 1 inch
Wheels - Chevron-Pattern, chopper blades
Drum width - 4 feet to
Drum diameter - 5.1 feet to
Blades on a wheel - 25
Diameter - with blades - 6.1 feet to
Wheels - Plus tips with wear-resistant material (ARM)
Drum width - 4 feet to
Drum diameter - 5.1 feet to
Tips on the wheel - 25
Diameter - with tips - 6.1 feet to
Wheels - Traction wheel with wear-resistant material (ARM)
Drum width - 4 feet to
Drum diameter - 5.1 feet to
Diameter - with tips - 5.7 feet to
Tips on the wheel - 45