Caterpillar COMPACTORS 826H - catalog of spare parts
Dimensions
The length of the blade on the ground is 27.34 feet
Height to the top of the cabin - 13.76 feet
Wheelbase - 12.14 feet per
Ground clearance - 1.61 ft.
Choose COMPACTORS 826H section:
| 2S0679 | BEARING A | Caterpillar | View |
| 3P2983 | SUN GEAR | Caterpillar | View |
| 1P7835 | CONE | Caterpillar | View |
| 1P7834 | CUP | Caterpillar | View |
| 6Y4280 | CONE-BEARING | Caterpillar | View |
| 4V8629 | BRG SLEEVE | Caterpillar | View |
| 5P3867 | RACE | Caterpillar | View |
| 3P3060 | SUN GEAR | Caterpillar | View |
| 2P8353 | 2P8353 | Caterpillar | View |
| 4V1901 | 4V1901 | Caterpillar | View |
| 8T2275 | 8T2275 | Caterpillar | View |
| 3P3096 | 3P3096 | Caterpillar | View |
| 3P3059 | GEAR | Caterpillar | View |
| 6Y3484 | BEARING | Caterpillar | View |
| 8S9076 | CUP | Caterpillar | View |
| 8S9075 | CONE | Caterpillar | View |
| 4P7371 | BUTTON | Caterpillar | View |
| 1W7239 | SHAFT A | Caterpillar | View |
| 1W7238 | SHAFT A | Caterpillar | View |
| 7T9755 | CUP-BEARING | Caterpillar | View |
Specifications
Engine
Engine make - 2236
Engine model - diesel C15 with ACERT technology
Full power - 401 hp
Net power - 354 hp
Displacement - 927.6cu in
Torque increase - 19%
Hole diameter - 5.4 inches
Stroke - 6.7 inches
Engine Model - Cat C15 ACERT
Flywheel power - 354 hp
Peak torque - gross - 1387 pounds
Operational
Weight in working condition - 81498 pounds
Fuel tank capacity - 177.6 gallons
Hydraulic capacity - 23.3 gallons
Engine oil capacity - 9gal
Cooling system capacity - 21.7 gal
Transmission Fluid Capacity - 16.4 gig
Transmission
Number of front gears - 2
Number of rear gears - 2
Maximum speed - 6.6 miles per hour
Forward - 1 - 3.6 mph
Forward - 2 - 6.1 miles per hour
Reverse - 1 - 4.1 miles per hour
Reverse - 2 - 6.6 miles per hour
Weights
Weight in working condition - 81498 pounds
Wheels
Front wheel drum width - 47.3 inches
The diameter of the drum front wheels - 60.4 inches
Rear wheel drum width - 47.3 inches
Rear wheel drum diameter - 60.4 inches
Hydraulic system
Installation of the safety valve - 3506.29 pounds per square inch
The diameter of the lifting cylinder x stroke - 120.65 mm 915 mm (4.74 inches in 36.02 inches)
Productivity of the bladed pump at 2000 rpm and 6900 kPa (1000 psi. Inch) - 93 g / min
Blade
Blade capacity - 17.1yd3
Height - 74.8 inches
Width - 14.8 feet in
Axles
Front - Planetary - Fixed
Swinging rear - 5 degrees
Brakes
Standards - Complies with OSHA, SAE J1473 DEC84, ISO 3450: 1985 standards
Dimensions
Length with a blade on the ground - 27.4 feet
Height to the top of the cabin - 13.8 feet
Wheelbase - 12.2 feet per
Ground clearance - 1.7 feet
Service replenishment options
Cooling system - 21.7 gal
Fuel tank - 177.6 gallons
Carter - 9gal
Hydraulic tank - 23.3 gallons
Gearbox - 16.4 gals
Differential - Last gear - Front - 23.8 gig
Differential - Last gear - Rear - 23.8 gig
Dimensions (approximate)
Width - above the wheels - 12.5 feet
Centerline rear axle to hitch - 7.5 feet
Width - above end bits - blade - 14.8 feet in
Turning radius - inside - 10.6 feet
Turning radius - outside - 24.1 feet
Taxi
ROPS / FOPS - Complies with SAE and ISO standards
Sound performance
Standards - conforms to ANSI / SAE and ISO standards
Straight blade
Height - 6.3 feet
Width - over the end bits - 14.8 feet
Dump - length - 14.2 feet
Capacity - 17yd3
Wheels - Chevron-Pattern, chopper blades
Drum width - 4 feet to
Drum Diameter - 5.1 Feet
Blades on the wheel - 24
Diameter - with blades - 6.1 feet
Hydraulic steering system
Performance piston pump at 2000 rpm and 7000 kPa (1.015 psi.) - 49 g / min
Safety Valve Installation — 3499 psi
Steering cylinder, bore and stroke - 114.3 mm 576 mm (4.49 inches to 22.68 inches)
Steering angle - 42 degrees
STEP Tips
Diameter - with tips - 6.2 feet to
Tips on the wheel - thirty
Semi u-blade
Capacity - 19yd3
Growth - 6.5 feet to
Width - Above End Bits - 14.8 feet to
Moldboard - straight length - 12 feet in
Moldboard - semi U-length - 1.6 feet to
Semi U-corner - 25 degrees
U-blade
Capacity - 21.9yd3
Growth - 6.9 feet to
Width - Above End Bits - 14.5 feet in
Moldboard - straight length - 6.9 feet to
Moldboard - U-length - 4.1 feet to
U-angle - 25 degrees