Caterpillar ASPHALT PAVER SE60 VT XW - catalog of spare parts
The SE60 VT XW provides an extremely dense, high-density matte texture. It uses rear extensions, carrier plates, plate compactors and has a paving range from 3.0 m to 10.0 m (9`10 "- 33"). It is excellent on interstates, highways, airport runways, and other applications large width.
A 70 kW generator built into the tractor, combined with a technologically advanced screed leveling system, ensures fast and uniform heat distribution. A 15-minute heating time with a standard width can lead to an increase in daily output and a reduction in fuel consumption due to the shorter waiting time for the screed plates to reach the set temperature. With a maximum width, the screed plate heats up in just 25 minutes.
Tampers effectively fit the material under the screed plates to ensure pre-compaction. Adjustable start and stop speeds ensure optimum mat finish, and the automatic speed setting takes into account changes in the laying speed.
Choose ASPHALT PAVER SE60 VT XW section:
EXCLUSIVE MONITORING
An exclusive generator system monitors heating elements for malfunctions to help plan planned service events. In addition, monitoring the temperature zone allows heating to continue in the event of a sensor failure, and warning indicators are displayed on LCD displays.
MORE CONTROL
The extenders are equipped with 2 speed ranges and proportional control for better performance on obstacles. Suspended controls located on extension cords allow operators to perform functions remotely. The conveyor`s gear ratio adjustment can be performed from the screed control panel when using a feed system with 2 sensors to maintain the optimum material height before the screed.
INTEGRATED CAT SORT MANAGEMENT
A factory-integrated Cat quality control system allows the crew to work with any of the tractor or coupling consoles. The split screen mode allows operators to work on one side or on each side of the tie. This is especially useful when training new operators and when the team has multiple responsibilities at the construction site.
SIMPLE ADJUSTMENT
Power controls for crown, slope and height allow you to adjust on the go with standard and maximum widths. Exclusive rear edge screed adjustments, as well as machined screeds, help optimize plate life and simplify alignment procedures.
EASY SERVICE, HIGH STRENGTH
Waterproof consoles and LCD displays provide performance in adverse conditions, and a million-cycle key switches and oil bath heaters provide long-term reliability. Heating elements extend for easy replacement.
ADDITIONAL PACKAGES FOR PREPARATION
The SE60 V XW can be equipped with extension cables that run up to 10.0 m (33 ft). Power adjustments for crown, slope and extension height make it easy to adjust the texture and quality of the mats. An exclusive fastening system uses power controls to fasten extension cords, eliminating the need for additional lifting devices.
WEIGHTS
Standard Weight |
9898.0 lb |
OPERATING SPECIFICATIONS
Standard Paving Range |
3.0 m - 6.0 m (10` - 19` 6") |
Maximum Paving Width |
33.0 ft |
Crown Range |
-2% to +5% per side |
Extender Slope Range |
-3% to +5% |
Maximum Paving Depth |
12.0 in |
Tamper Speed Range |
700 to 1800 rpm |
Vibrator Speed Range |
0 - 3000 vpm |
Heating Time - Maximum Width |
25 minutes |
Heating Time - Standard Width |
15 minutes |
DIMENSIONS
Screed Plate Width - Front to Back |
16.0 in |
Transport Length - Tractor and Screed |
22.6 ft |
Transport Width - Endgates Folded |
9.85 ft |
Length - Front to Back, Endgates Attached |
98.0 in |
Length - Front to Back, Endgates Removed |
76.0 in |
Specifications
Weights
Standard Weight 9898lb
Dimensions
Transport Width - Endgates Folded9.9ft in
Screed Plate Width - Front to Back16in
Transport Length - Tractor and Screed 22.6ft in
Operating Specifications
Standard Paving Range 3.0 m - 6.0 m (10` - 19` 6")
Maximum Paving Width 33ft in
Crown Range -2% to +5% per side
Maximum Paving Depth 12in
Extender Slope Range -3% to +5%
Heating Time - Standard Width15 minutes
Heating Time - Maximum Width25 minutes
Tamper Speed Range 700 to 1800 rpm