Caterpillar ARTICULATED TRUCKS 730C2EJ - catalog of spare parts
Engine
displacement
762.8cu in
boring
5.1in
Stroke
6.2in
Emissions
730C2 EJ complies with Tier 4 Final / Stage IV emission standards.
Choose ARTICULATED TRUCKS 730C2EJ section:
3S1404 | BEARING | Caterpillar | View |
8T2275 | 8T2275 | Caterpillar | View |
1P6872 | 1P6872 | Caterpillar | View |
3P1210 | CONE | Caterpillar | View |
5P9505 | CONE | Caterpillar | View |
6S2905 | RACE & ROLLER | Caterpillar | View |
2V5715 | BUSHING | Caterpillar | View |
6Y2539 | CONE | Caterpillar | View |
6Y2540 | CUP | Caterpillar | View |
8S9151 | CUP | Caterpillar | View |
8S9152 | CONE | Caterpillar | View |
6V3950 | 6V3950 | Caterpillar | View |
2P8986 | CUP | Caterpillar | View |
2P8987 | CONE BEARING | Caterpillar | View |
5P6727 | BEARING A | Caterpillar | View |
Specifications
Net Power - SAE J1349 - 367hp
Full power - SAE J1995 - 375hp
Engineering model - Cat C13 ACERT
Net power - ISO 14396 - 370hp
Note (1)
The Link to Final Level 4 / Stage IV includes the United States EPA Final Level 4, EU Stage IV, Japan 2014 (Final Level 4), and Korea Level 4.
Note (2)
Rated power is applied at a rated speed of 1800 rpm when tested under the conditions for the specified standard.
Note (3)
The declared net power is the power available on the flywheel when the engine is equipped with an alternator, an air cleaner, a silencer and a fan at minimum speed.
Note (4)
The net power when the fan is running at maximum speed is 254 kW (341 hp) under standard SAE conditions.
Note (5)
DEF used in Cat SCR systems must comply with the requirements set forth in International Organization for Standardization (ISO) 22241-1. The requirements of ISO 22241-1 are met by many DEF brands, including those with AdBlue or API certificates.
Maximum engine torque (SAE J1995) - 1579 pounds
Peak engine speed - 1200rpm
Engine Model - USA EPA Tier 4 Final / EU Stage IV - Cat C13 ACERT
Peak engine torque network (SAE J1349) - 1564 pounds
No engine lower down - 12,500 feet in
Transmission
Forward - 1 - 5mph
Forward - 2 - 9mph
Forward - 3 - 14mph
Forward - 4 - 21mph
Forward - 5 - 29mph
Forward - 6 - 34mph
Reverse - 1 - 6mph
Steering
Lock to Lock - 4.75 seconds at 60 rpm
Dump
Nominal payload - 68343.3lb
Service replenishment options
Cooling system - 21.9gal
Fuel tank - 108.8gal
Def tank - 5.2gal
Engine crankcase - 10gal
Transmission - 12.4gal
Hydraulic system - 29.1gal
Final drives / Differential - 33gal
Output Transmission Gearbox - 6.3gal
Standards
Cab - FOPS - ISO 3449 Level II 2005
Cab - ROPS - ISO 3471 2008
Brakes - ISO 3450 2011
Steering - ISO 5010 2007
Operating weight
Front axle - empty - 34535lb
Central axis - empty - 12103lb
Rear axle - empty - 11552lb
Total - Empty - 58190lb
Front axle - rated load - 7231lb
Central axis - rated load - 27249lb
Rear axle - rated load - 27249lb
Total rated load - 61729lb
Front Axle - Loaded - 36013lb
Central Bridge - loaded - 42362lb
Rear axle - loaded - 41811lb
Total loaded - 120186lb
Sound levels
Cabin interior - 76 dB (A)
Note (1)
The Leq operator sound pressure level (equivalent sound pressure level), measured in accordance with the duty cycle procedures specified in ANSI / SAE J1166 OCT 98, is 76 dB (A) for the cab offered by Caterpillar, when properly installed, maintained and tested with doors . and the windows are closed.
Note (2)
Hearing protection may be required when working with an open operator station and cab (if they are not properly serviced or doors / windows open) for long periods of time or in noisy environments.
Turning circle
Note - The dimensions shown are for cars equipped with 750/65 tires.
Dimensions of rotation - angle of rotation - left / right
Rotation dimensions - SAE rotation radius - 294in
Dimensions of rotation - radius of clearance - 318in
Swing Dimensions - Internal Radius - 153in
Rotation dimensions - width of passage - 210in
Body volume
Heaped up (SAE 2: 1) - 22.1yd3
Stricken - 17.7yd3
Body plate
Body type - High strength wear-resistant steel Brinell HB450
Body removal
Release time - 12 s
Time of withdrawal - 15 s