Caterpillar ARTICULATED DUMP TRUCK 730C - catalog of spare parts
Dimensions
Dimensions
Overall length - 32.55 feet per
Overall width - 9.44 feet in
Overall height is 11.29 feet in
Wheelbase - 15.32 feet in
Ground clearance - 1.63 feet
Dump height - 21.33 feet per
Blade ground clearance - 1.83 feet
Choose ARTICULATED DUMP TRUCK 730C section:
Specifications
Engine
The number of cylinders - 6
Engine make - 2236
Engine Model - C11 with ACERT Technology
Full power - 329 hp
Net power - 325 hp
Displacement - 762.8cu in
Aspiration - Turbo-charged
Hole diameter - 5.1 inches
Stroke - 6.2 inches
Emissions - 730 meets Level 4 Final / Stage IV standards.
Net power - ISO 9249 - 321 hp
Net power - SAE J1349 - 367l.s.
Full power - SAE J1995 - 375 hp
Engine Model - Cat C13 ACERT
Net power - ISO 14396 - 370 hp
Note (1)
Links to Level 4 / Stage IV Final include Level 4 US EPA Final, EU Stage IV, Japan 2014 (Level 4 Final) and Korean Tier 4 Emission Standards Final.
Note 2)
Rated power is applied at a rated speed of 1800 rpm when tested under the conditions for the specified standard.
Note 3)
The declared net power is the power available on the flywheel when the engine is equipped with an alternator, an air cleaner, a silencer and a fan at minimum speed.
Note (4)
The net power when the fan is running at maximum speed is 254 kW (341 hp) under standard SAE conditions.
Net power - EEC 80/1269 - 321 hp
Note (5)
DEF used in Cat SCR systems must comply with the requirements set forth in International Organization for Standardization (ISO) 22241-1. The requirements of ISO 22241-1 are met by many DEF brands, including those with AdBlue or API certificates.
Maximum engine torque (SAE J1995) - 1579 lb-ft
Peak engine speed - 1200 rpm
Engine Model - USA EPA Tier 4 Final / EU Stage IV - Cat C13 ACERT
Peak Engine Torque Network (SAE J1349) - 1564 lb-ft
No lowering of the engine below - 12,500 feet in
Operational
Fuel tank capacity - 95.2 gals
Hydraulic system capacity - 27g
Cooling system capacity - 22.5 gal
Engine oil capacity - 9.8 gallons
Transmission Fluid Capacity - 9.6 gals
Tire size - 23.5R25
Transmission
Number of front gears - 6
Number of rear gears - 1
Top Speed - 34.4 mph
Forward - 1 - 5 miles per hour
Forward - 2 - 9 miles per hour
Forward - 3 - 14 miles per hour
Forward - 4 - 21 miles per hour
Forward - 5 - 29 miles per hour
Forward - 6 - 34 miles per hour
Reverse - 1 - 6 miles per hour
Steering
Lock to Lock - 4.75 seconds at 60 rpm
Weights
Front Axle - Empty - 28,968.8 pounds
The central axis is empty - 11023.2%
Rear Axle - Empty - 10383.8 pounds
Front axle - loaded - 34965.4%
Central axis - loaded - 39021.9%
Rear Axle - loaded - 38382.5 pounds
Total empty - 50375.7 pounds
Total loaded - 112369.7 pounds
Dump
Rated payload - 61949.9 pounds
Capacity - Shock - 17.2id3
Capacity - Bulked - 22.2yd3
Lifting time - 12 sec
Down Time - 12sec
Dimensions
Overall length - 32.6 feet
Overall width - 9.5 feet
Overall height is 11.3 feet
Wheelbase - 15.4 feet per
Ground clearance - 1.7 feet
Blade height - 21.4 feet
Blade ground clearance - 1.9 feet
Service replenishment options
Cooling system - 21.9 gal
Fuel tank - 108.8 gal
DEF Tank - 5.3 gal
Engine crankcase - 10gal
Gearbox - 12.4 gallons
Hydraulic system - 29.1 gal
End Discs / Differential - 33g
Transmission with output gear - 6.3 gal
Standards
Cabin - FOPS - ISO 3449 Level II 2005
Cab - ROPS - ISO 3471 2008
Brakes - ISO 3450 2011
Steering - ISO 5010 2007
Operating weight
Front axle - empty - 33069lb
The central axis is empty - 10053 pounds
Rear axle - empty - 9568 pounds
Total - Empty - 52,690 pounds
Front Axle - Rated Load - 7231 lb.
Central axis - rated load - 27,249 pounds
Rear Axle - Rated load - 27,249 pounds
Total - Rated load - 61729 pounds
Front Axle - Loaded - 40,300 pounds
Central Bridge - loaded - 37302 pounds
Rear axle - loaded - 36817 pounds
Total - loaded - 114420 pounds
Sound levels
Internal cabin - 72 dB (A)
Note (1)
The Leq operator sound pressure level (equivalent sound pressure level) measured in accordance with the duty cycle procedures specified in ANSI / SAE J1166 OCT98 is 72 dB (A) for the cab offered by Caterpillar, when properly installed, maintained and tested with doors and the windows are closed.
Note 2)
Hearing protection may be required when working with an open operator station and cab (if they are not properly serviced or doors / windows open) for long periods of time or in noisy environments.
Turning circle
Note Dimensions are for machines equipped with 23.5R25 tires.
Dimensions of rotation - angle of rotation - left / right
Swing Dimensions - SAE Swing Radius - 294 inches
Swing Dimensions - Clearance Radius - 318 inches
Dimensions of rotation - inner radius - 153 inches
Swing Size - Aisle width - 210 inches
Body volume
Heaped up (SAE 2: 1) - 23yd3
Struck - 17.4yd3
Rear Door Kick - 18.2yd3
The back door tricked SAE 2: 1 - 24.6yd3
Body lift
Rise time - 12 s
Decrease time - 8 s
Slab thickness
Front - 0.4 inches
Scow - 0.6 inches
Side - 0.5 inch
Base - 0.6 inches
Front panel - 0.3 inches
Base plate - 0.6 inches
Side plates - 0.5 inches
Body plate
Body plate type - high-strength wear-resistant steel Brinell HB450
Optimum fit of loader / truck pass
Note. Optimum system fit gives you a significant performance advantage. The Model 730 is great for Cat 349F and 336F hydraulic excavators; and wheel loaders Cat 972M, 966M, 962M and 950M. Compliance with the tools of loading and transportation leads to an increase in production and a decrease in system costs per unit of displaced volume.
Hydraulic Excavators: 349F / 349F XE - Skips - 45
Hydraulic Excavators: 336F / 336F XE - Skips - 56
Wheel loaders: 972M / 972M XE - passes - 34
Wheel loaders: 966M / 966M XE - passes - 4
Wheel loader: 962M - passes - 45
Wheel loader: 950M - passes - 5