Caterpillar WHEEL-TYPE LOADER 903C - catalog of spare parts

Engine

Engine make - 2236

Engine Model - C2.4

Net power - 40 hp

Gross Power - 42 HP

Displacement - 147cu per

Aspiration - Turbocharged

Hole Diameter 3.4

4 inch travel

Engine Model - Cat C2.4 *

Note - * Engine complies with US EPA Tier 4 Interim.

Net power - 2200 rpm - SAE J1349 rating - 40 hp

Net power - 2200 rpm - ISO 9249 rating - 40 hp

Net power - 2200 rpm - EEC rating 80/1269 - 40 hp

Operational

Operating Weight - 9150 pounds

11.4 gallon fuel tank capacity

Hydraulic capacity - 6.3 gal

Engine oil volume - 2.4gal

Cooling Capacity 3 Gallons

3,900 pounds static tipping weight

Operating voltage - 12 V

Generator current strength - 70 amperes

Tire size - 15.5-16.5

Buckets

Bucket volume - 0.6-1.0 m3 (0.8-1.3 cubic m)

Hydraulic system

Safety Valve Installation - 2988

Pump productivity - 14 gal / min

Raise Time - 4.7sec

Unloading time - 0.8 s

Lowering Time - 3.1sec

Hydraulic cycle time - dump - 0.8 s

Hydraulic Cycle Time - Rise - 4.7 s

The main relief is 2988 psi

3rd auxiliary stream - 14 gallons / min

Hydraulic cycle time - lower, float - 3.1 s

Dimensions

Length with bucket on the ground - 15.9 feet in

Height to Cab Top - 8.2 Feet in

Ground clearance - 1.3 feet in

Wheelbase - 5.9 ft. In

Articulated finger - maximum height - 10.6 feet per

Reach at Max Lift and Dump - 2.9 feet in

Operational characteristics

Breakout Force - 5171 lbs.

Nominal bucket capacity - 0.8yd3

Tire size - 33 15,5-16,5, 12PR

Standard - Operating Weight - 9150 lbs.

Standard - Nominal Full Load Turn Load - Bucket - 1950 lbs

Standard - Direct Tipping Load, 4,650 lb Bucket

Standard - Static Tipping Load - Full Turn, Bucket - 3,900 lbs.

Standard - Rackback, Transport Position - 52

Standard - Nominal Working Load per Full Turn - Fork (EN 474-3: 2006, Hard and Flat Surface, 500 mm (20 in) Load Center) (80% of FTSTL) - 2,500 lbs.

Standard - Nominal full-revolution workload - forks (EN 474-3: 2006, rough terrain, 500 mm (20 in.) With load center) (60% of FTSTL) - 1,900 pounds

With additional counterweight - Operating Weight - 9,500 lbs.

With optional counterweight - Nominal full-revolution workload - Bucket - 2,100 pounds

With optional counterweight - direct tipping load - 5,000 lb bucket

With additional counterweight - static tipping load per revolution - bucket - 4,200 pounds

With additional counterweight - Rackback - Transport position - 52

With additional counterweight - nominal full-revolution working load - forks (EN 474-3: 2006, firm and flat surface, 500 mm (20 in) load center) (80% of FTSTL) - 2,700 pounds

With additional counterweight - nominal full-revolution working load - forks (EN 474-3: 2006, rough terrain, load center 500 mm (20 inches)) (60% of FTSTL) - 2,000 pounds

Service replenishment options

Cooling system - 3gal

Fuel Tank - 11.4 Gallons

Hydraulic system - 6.3 gal

Engine oil - 2.4gal

 

Dimensions (approximate)

Ground clearance - 1.3 feet in

Wheelbase - 5.9 feet in

Cab Height - 8.2 Feet in

Total length - with bucket - 15.9 feet in

Departure at a maximum blade height of 2.9 feet

Digging Depth - 8 inches

Maximum blade height - 8 feet in

Height Load - 9.6 ft.

Hinge pin at maximum height - 10.6 feet per

Departure angle - 30

Total length - with forks - 17.4 feet in

Reach - ground level - 3.7 feet in

Maximum Departure - 5.4 Feet

Fork Depth Above Ground - 2 Inches

Fork Height at Maximum Departure - 4.7 Feet

Maximum fork height - 10.3 feet in

Departure forks at maximum height - 2.5 feet in

Turn Radius - Above Bucket - 13.2 ft.

Turn Radius - Internal Tire - 5.4 ft.

Width - Bucket - 5.8 Feet in

Tire measure - 4.3 feet in

Machine Width - 12-16.5 Tires 10PR - 5.4 feet in

Machine Width - Density 33-15.5 16.5 Tires - 5.6 feet per

Machine Width - Flexport 33 6 11 Tires - 5.2 Feet

Joint angle - 40

Steering angle - left / right - 80

Dropping angle at maximum height - 40

Taxi

ROPS - ISO 3471: 2008

FOPS - ISO 3449: 2000 Level I

Maximum material density

NOTE Based on ISO 7546: 1983 and rated working loads per revolution and without additional counterweight.

General Purpose - Bucket Type - General Purpose

General Purpose - Rated Power - 0.8yd3

General Purpose - Blade Height - 96 Inches

General Purpose - Maximum Material Density - 2437 lbs / yard

General Purpose - Bucket Width - 70 Inches

Lightweight Material - Bucket Type - Lightweight Material

Lightweight Material - Nominal Capacity - 1.3yd3

Lightweight - Blade Height - 91 Inch

Lightweight - Maximum Material Density - 1,423 lbs / yard

Lightweight Material - Bucket Width - 74 Inches