Caterpillar SKID STEER LOADER 236D - catalog of spare parts
Dimensions
Length with Bucket - 11.5 Feet in
Length without bucket - 9.1 feet in
Tire Width - 5.5 Feet in
Height to Cab Top - 6.9 Feet in
Ground clearance at Max Lift and Dump - 7.8 feet in
Wheelbase - 3.7 ft.
Ground clearance - 7.7 inches
Reach at Max Lift and Dump - 16 inches
Turn radius from center - incl. Bucket - 85.3 inches
Wheelbase - 3.7 ft. In
The note
Operating Weight, Performance and Dimensions, All Based on an 75kg (165 lb) Operator, All Fluids, One Speed, OROPS, 1676 mm (66 inches) Trash Can, Cat 10 16.5 Tires, Standard Hydraulic Flow System, Seat with mechanical suspension, optionally no counterweights and manual quick couplings (unless otherwise indicated).
Bucket Finger Height - Maximum Lifting Height - 10.3 Feet
Height - Cab Top - 6.9 Feet in
Length - Without Bucket - 108.9 Inches
Length - with bucket on the ground - 137.3 inches
Maximum total height - 156.6 inches
Bucket Finger Height - Carry Position - 7.5 Inches
Ground clearance at maximum lift and unload - 92.9 inches
Departure angle - 26 degrees
Maximum reset angle - 48 degrees
A-pillar angle - maximum height - 91 degrees
Center Turn Radius - Clutch - 51.8 inches
Turn the radius from the center - bucket - 83in
Achieve - maximum lift / reset - 16 inches
Maximum reach - with arms parallel to the ground - 53.3 inches
Width of the car over tires - 66 inches
Bumper protrusion - behind the rear axle - 40.2 inches
Turning radius from center - rear of car - 64.5 inches
Choose SKID STEER LOADER 236D section:
Specifications
engine
Engine make - 2236
Engine Model - Cat 3.3B DIT (Turbo)
Gross Power - 74.3 HP
Displacement - 203cu per
Hole Diameter - 3.7 inches
4.7 inch travel
Net Power - ISO 9249 - 73.9 HP
Gross Power - SAE J1995 - 74.3 HP
Engine Model - Cat C3.3B DIT (Turbo)
Net Power - SAE 1349 - 73.2 HP
Peak Torque - 1,500 rpm - SAE J1995 - 195 lb-ft
Flywheel net power - 73.2 hp
Operational
Operating Weight - 6,559 pounds
Fuel capacity - 27.7 gal
Cooling system capacity - 3.7 gallons
Hydraulic Capacity 13.2 Gallons
The volume of fluid in the box - each side - 2.3 gal
Working speed - 7 miles per hour
Top Speed - 10.6 Mph
Power train
Speed - forward or reverse - one speed - 7 miles per hour
Driving Speed - Forward or Reverse - Two Speed - 10.6 mph
Weights
Operating Weight - 6,559 pounds
The note
Operating Weight, Performance and Dimensions, All Based on an 75kg (165 lb) Operator, All Fluids, One Speed, OROPS, 1676 mm (66 inches) Trash Can, Cat 10 16.5 Tires, Standard Hydraulic Flow System, Seat with mechanical suspension, optionally no counterweights and manual quick couplings (unless otherwise indicated).
Loader
Strength - 5074
Tipping angle - 3600 degrees
Hydraulic system
Hydraulic Flow - Standard - Loader Hydraulic Pressure - 3335 psi
Hydraulic flow - Standard - Loader hydraulic flow - 20 gal / min
Hydraulic flow - Standard - Hydraulic power (rated) - 39 hp
Hydraulic flow - high flow rate - hydraulic power (calculated) - 58 hp
Hydraulic Flow - High Flow - Loader Hydraulic Pressure - 3335 psi
Hydraulic flow - high flow rate - loader hydraulic flow - 30 gal / min
Hydraulic
Pump productivity - 20 gal / min
Pressure relief valve - 3335 psi Inch
Dimensions
Length with Bucket - 11.45 Feet in
Tire Width - 5.5 Feet in
Height to Cab Top - 6.83 Feet in
Wheelbase - 3.63 feet in
Ground clearance - 7.7 inches
Length Without Bucket - 9.08 Feet In
Ground clearance in Max Lift and Dump - 7.75 feet in
Reach at Max Lift and Dump - 16 inches
Operational characteristics
The note
Operating Weight, Performance and Dimensions, All Based on an 75kg (165 lb) Operator, All Fluids, One Speed, OROPS, 1676 mm (66 inches) Trash Can, Cat 10 16.5 Tires, Standard Hydraulic Flow System, Seat with mechanical suspension, optionally no counterweights and manual quick couplings (unless otherwise indicated).
Nominal working capacity with optional counterweight - 2,000 pounds
Tipping Load - 3,600 pounds
Breakout Force - Tilt Cylinder - 5074 lbs.
Nominal working capacity - 1800 pounds
Service replenishment options
Cooling System - 3.7gal
Fuel tank - 27.7 gal
Hydraulic Tank - 10.3 Gallons
Crankcase - 3gal
Hydraulic system - 13.2 gal
Chain box - each side - 2.3 gal
Taxi
ROPS - ISO 3471: 2008
FOPS - ISO 3449: 2005 Level I
FOPS Level II - ISO 3449: 2005 Level II
Air conditioning system
Air conditioning
The air conditioning system on this unit contains the fluorinated greenhouse refrigerant R134a (global warming potential = 1430). The system contains 0.81 kg of refrigerant with a CO2 equivalent of 1.158 metric tons.
Noise level
Inside the cab * - 83 dB (A)
External cab ** - 101 dB (A)
Note (1)
Cab and Roll Over Protective Structures (ROPS) are standard in North America and Europe.
Note (2)
* Declared dynamic sound pressure levels of the operator according to ISO 6396: 2008. The measurements were carried out with the doors and windows of the cab closed and at 70% of the maximum speed of rotation of the engine cooling fan. Sound levels may vary at different speeds of the engine cooling fan.
Note (3)
** Indicated sound power level for marked CE configurations when measured in accordance with the test procedure and conditions specified in 2000/14 / EC.