Caterpillar MOTOR GRADERS 140M - catalog of spare parts

Specifications

Ripper

Ejection force - 26259lb

Digging Depth - Maximum - 16.8in

Shank Holders - five

Penetration power - 20540lb

Increase machine length, increase beam - 36.2in

Distance between ripper shank holders - 21in

Engine

Number of cylinders - 6

Engine make - 2236

Engineering model - C7 ACERT VHP

Measured power @ - 2000rpm

Maximum power - 183hp

Net Power Gears 7-8 - 183hp

Displacement - 439cu in

Boring - 4.3in

Stroke - 5in

Emissions - Emissions are equivalent to US EPA Level 3 and EU Stage IIIA.

Engineering model - Cat C7 ACERT

Note (1) - Maximum torque (VHP Plus) is measured at 1000 rpm.

Note (2) - Net power is tested in accordance with ISO 9249, SAE J1349 and EEC 80/1269 at the time of manufacture.

Note (3) - The declared net power is the power available at a nominal speed of 2000 rpm, measured on the flywheel when the engine is equipped with a fan operating at minimum speed, an air cleaner, a muffler and an alternator.

Note (4) - Power in accordance with ISO 14396; Rated Speed ​​= 2000 rpm; VHP Plus = 175 kW (234 HP)

Note (5) - No engine power reduction of up to 3,048 m (10,000 ft) is required.

Height reduction - 10,000 feet in

Base power (1st gear) - net - 183hp

Speed ​​at rated power - 2000 rpm

High - Ambient - 122degrees

Base power (1st gear) - net - metric - 186hp

High ambient temperature - fan speed - maximum - 1650 rpm

Maximum Torque - VHP Plus - 855 pounds

High ambient temperature - fan speed - minimum - 600 rpm

VHP Plus Range - Net - 136-174 kW (183-233 HP)

VHP Plus Range - Clean - Metric - 136-174 kW (186-237 HP)

Torque Rise - VHP Plus - 39%

Standard - Fan Speed ​​- Maximum - 1450 rpm

Standard - Fan Speed ​​- Minimum - 600 rpm

Standard - Ambient - 109degrees

Frame

Front Frame Structure - Height - 12 feet in

Front Frame Structure - Width - 12 feet in

Front Frame Structure - Thickness - 0.6 ft in

Circle - Diameter - 60.2in

Drawbar - Height - 6in

Front Axle - Center Height - 23in

Circle - beam thickness - 1.6in

Front Axle - General Side Swing - 32 degrees

Drawbar - Width - 3in

Front Axle - Wheel Tilt - Left / Right - 18 degrees

Operational

Standard Operating Weight - Front Axle - 9173lb

Standard Operating Weight - Rear Axle - 24183lb

Standard operation weight - total - 33356lb

Maximum Operating Weight - Front Axle - 17908lb

Maximum Operating Weight - Rear Axle - 32967lb

Maximum working weight - total - 50875lb

Fuel tank capacity - 110gal

The volume of fluid in the cooling system - 12.4gal

Hydraulic system volume - 15.9gal

Rear differential / final drive fluid volume - 17.2gal

Transmission Fluid Volume - 1.8gal

Tandem fluid volume (each) - 16.9gal

Power train

Brakes - Parking - Several oil disc

Brakes - Service - Several oil disc

Transmission - Direct drive, gear shift, countershaft

Forward / Reverse Gear - 8 forward / 6 back

Brakes - Secondary - Dual circuit control system

Brakes - Service - Surface Area - 3565in2

Transmission

Gear type - direct drive, gear shift, countershaft

Number of gears - forward - eight

Number of gears - reverse - 6

Max. Speed ​​forward - 29mph

Max. Speed ​​- Reverse - 22.9mph

Steering

Articulation angle - 20degrees

Turning radius - 25.5 feet in

Front axle

Wheel tilt - 18 degrees

Fluctuations - Total - 32 degrees

Ground clearance - 1.9 feet in

Weights

The note - The base operating weight is calculated for the standard configuration of the machine with a 14.00R24 tire with a composite rim, a full fuel tank, coolant, lubricants and an operator.

Gross Vehicle Weight - Usually Equipped - Rear Axle - 30152lb

Gross Vehicle Weight - Usually Equipped - Front Axle - 11716 lbs

Gross Vehicle Weight - Usually Equipped - Total - 41,868 pounds

Working Weight - Typically Included - 41,868 lbs.

Total Vehicle Weight - Base - Total - 36,554 pounds

Gross Vehicle Weight - Typically Equipped - 41,868 pounds

Gross Vehicle Weight - Maximum - Total - 51,893 lbs.

Gross Vehicle Weight - Base - Rear Axle - 26,993 lbs

Gross Vehicle Weight - Base - Front Axle - 9561 lbs

Gross Vehicle Weight - Maximum - Front Axle - 16,606 lbs

Gross Vehicle Weight - Maximum - Rear Axle - 35,287 lbs

Hydraulic system

Pump Type - Variable Piston

Pump flow rate - 55.7 gal / min

Pressure relief valve - 3500 psi Inch

Type of circuit - Electro-hydraulic load measurement, closed center

Note. Pump performance is measured at 2150 rpm.

Maximum System Pressure - 3,500 psi

Pump productivity - 55.7 gal / min

Standby Pressure - 450 psi

Plow blade

Blade Width - 12 ft.

Blade height 24 inches

Blade Thickness - 0.9 Inches

Maximum cutting depth - 28.1 inches

Left Shift - 20.1 inches

Right Shift - 26 inches

Maximum Blade Weight - 45,787.8 lbs.

Blade Width - 12 Feet

Arc radius - 16.3 inches

Throat Cleansing - 6.5 inches

Cutting edge width - 6 inches

Cutting edge thickness 0.6 inches

End bit - 6 inches wide

Finish - Thickness - 0.6 inches

Moldboard - 24 inches high

Moldboard - thickness - 0.9 inches

Moldboard - Width - 12 Feet in

The note - The thrust of the blade is calculated with a thrust coefficient of 0.9, which is equal to the sliding conditions, and the gross vehicle weight (GVW).

Blade Traction - Maximum Gross Weight - 31,758 lbs

Blade Traction - Base Weight - 24,294 lbs

Outlet Pressure - Maximum Gross Weight - 28,503 lbs

Pressure Down - Base Gross Weight - 16,410 pounds

A circle

Diameter - 60.2 inches

Left Shift - 27.4 inches

Shift to the right - 28.7 inches

The maximum departure of external tires - left - 70.5 inches

Maximum Outside Tire Coverage - Right - 77.9 inches

Max elevator above the ground - 18.9 inches

Blade angle - front - 40 degrees

Blade angle - rear - 5 degrees

Dimensions

Height to Isomount Cab Top - 10.8 ft.

Total length - 28.6 feet in

Tire Width - 8.2 Feet in

Wheelbase - 20.1 feet in

Blade Base - 8.4 feet in

The wheelbase of the tandem bridge is 5 feet in

Rear clearance - 1.2 feet in

Front Ground Clearance - 1.9 Feet

Height - Cab Top - 130 ft.

Width - External Rear Tires - 98 inches

Height - Top of Cylinders - 119 inches

Ground clearance - rear axle - 13.3 inches

Width - External Front Tires - 98 inches

Length - Front Axle to Mid Tandem - 241 Inches

Length - 344 inches from front tire to rear of machine

Length - Front Axle to Blade - 100 Inches

Length - between tandem axles - 60 inches

Width - Tire Center Lines - 84 inches

Height - Exhaust Pipe - 121 Inches

Height - Center Front Axle - 23.5 inches

Height - Cab Top Product Link - 133in

Length - Pusher to the Ripper - 399 inches

Length - Pusher Plate to the Ripper - 386 inches

Operational characteristics

Top Speed ​​- Forward - 29 Mph

Top Speed ​​- Reverse - 22.9 mph

Turn Radius - External Front Tires - 25 ft.

Range of rotation - left / right - 47.5 degrees

Joint angle - left / right - 20 degrees

Forward - 8 - 29 miles per hour

Forward - 7 - 19.9 mph

Forward - 6 - 14.5 mph

Forward - 5 - 10.6 miles per hour

Forward - 4 - 6.8 mph

Forward - 3 - 5 miles per hour

Forward - 2 - 3.4 mph

Forward - 1 - 2.5 miles per hour

Reverse - 6 - 22.9 mph

Reverse - 5 - 15.7 mph

Reverse - 4th - 8.4 mph

Reverse - 3rd - 5.4 mph

Reverse - 2nd - 3.7 mph

Reverse - 1 - 2 mph

Standards

Brakes - ISO 3450: 1996

ROPS / FOPS - ISO 3471: 2008, ISO 3449: 2005 Level II

Sound - ISO 6394: 2008, ISO 6395: 2008

Note (1)

The static sound pressure level of the operator, measured in accordance with ISO 6394: 2008 for the cab offered by Caterpillar, with proper installation, maintenance and testing with closed doors and windows and a hydraulic fan at maximum speed is 74 dB (A).

Steering - ISO 5010: 2007

Top-up Service

Cooling system - 10.6 gal

Engine oil - 6.6 gal

Hydraulic system - Tank - 16.9 gal

Tandem Housing - each - 16.9 gal

Hard Drive - 1.8gal

Front wheel spindle bearing housing - 0.2gal

Fuel tank capacity - 110 gal

Transmission - Differential - Final drives - 16.9 gal

Blade range

Circle Shift - Right - 28.7 inches

27.4-inch left-hand shift

Midsboard Sideshift - Right - 26 inches

Lateral shift, left - 20.1 inches

Range of blade tip - forward - 40 degrees

Blade tip range - back - 5 degrees

The maximum shoulder extension outside the tires - on the right - 77.9 inches

Maximum shoulder reach outside the tires - left - 70.5 inches

The maximum rise above the ground - 18.9 inches

Maximum cutting depth - 28.1 inches

Maximum blade angle - 90 degrees

Baking powder

Back - Scarifier Shank Holders - 9

Mid, V-Type - Scarifier Shank Holders - 11

Front, V-shaped, 5 or 11 tooth - Working width - 47.4 inches

Front, V-shaped, 5 or 11 tooth - scarification depth, maximum - 18.4 inches

Front, V-shaped, 5 or 11 tooth - Scarifier shank holders - 5, 11

Front, V-shaped, 5 or 11 tooth - The distance between the holders of the scarifier shank is 4.6 inches

Medium V-Type - Working Width - 46.6 inches

Medium, V-type - scarification depth, maximum - 11.5 inches

Medium V-Type - Distance between Scarifier Shank Holders - 4.6 inches

Back - Working Width - 91 Inches

Behind - scarification depth, maximum - 10.5 inches

Rear - 10.5-inch spacing between the holders of the scarifier shank

Tandems

Height - 19.9 inches

Width - 7.9 inches

Sidewall Thickness - Inner - 0.6 inches

Sidewall Thickness - Outer - 0.7 Inches

Drive Chain Pitch - 2 Inches

The distance between the axles of the wheels - 60 inches

Tandem Swing - Forward-Up - 15 degrees

Tandem Swing - Forward-Down - 25 Degrees

Net Power - VHP Plus

Equipment - Forward 1 - 183hp

Equipment - Forward 2 - 188hp

Movement - Forward 3rd - 203hp

Transmission - forward 4th - 208hp

Equipment - Forward 5 - 213hp

Equipment - Forward 6 - 218hp

Equipment - Forward 7 - 233 HP

Equipment - forward 8th - 233 hp

Movement - 1st Reverse - 183hp

Movement - 2nd Reverse - 188hp

Transmission - reverse 3-6 - 203 hp