Caterpillar WHEEL-TYPE LOADER 902C2 - catalog of spare parts
Dimensions (approximate) - high rise
Wheelbase - 5.9 feet in
Cab height - 8.2 feet to
Ground clearance - 15.6in
Total length - with bucket * - 15.9 feet in
Reach at maximum blade height * - 2.9 feet in
Digging depth - 8in
Maximum blade height * - 8 feet in
Height load - 9.6 feet in
Articulated finger at maximum height - 10.6 feet in
Departure angle - degrees - 30 degrees
Total length - with forks - 17.5 feet in
Reach - Ground Level - 3.7 feet in
Maximum reach - 5.4 feet to
Fork Depth Above Ground - 2in
Fork height at maximum reach - 4.6 feet to
Maximum fork height - 10.3 feet in
Departure forks at maximum height - 2.5 feet in
Turn radius - above the bucket * - 13.2 feet in
Turn radius - inner tire ** - 5.4 feet to
Width - Bucket * - 5.8 feet in
Tire sensor - 4.3 feet in
Machine Width **5.6 feet to
Articulation angle40 degrees
Dump angle at maximum height40 degrees
Note (1)* Depends on the size of the bucket.
Note (2)** Depends on tire size.
Swing Angle - Left / Right80 degrees
Dimensions (approximate) - standard elevator
Wheelbase - 5.9 feet in
Cab height - 8.2 feet to
Ground clearance - 15.6in
Total length - with bucket * - 15.4 feet in
Reach at maximum blade height * - 2.9 feet in
Digging depth - 8in
Maximum blade height * - 7.5 feet in
Height load - 9.2 feet in
Articulated finger at maximum height - 10.1 feet in
Departure angle - degrees - 30 degrees
Total length - with forks - 17 feet in
Reach - Ground Level - 3.2 feet in
Maximum reach - 5 feet in
Fork Depth Above Ground - 2in
Fork height at maximum reach - 4.6 feet to
Maximum fork height - 9.8 feet in
Departure forks at maximum height - 2.5 feet in
Turn radius - above the bucket * - 12.9 feet in
Turn radius - inner tire ** - 5.4 feet to
Width - Bucket * - 5.8 feet in
Tire sensor - 4.3 feet in
Machine Width ** - 5.6 feet to
Articulation angle - 40 degrees
Dump angle at maximum height - 40 degrees
Note (1) - * Depends on the size of the bucket.
Note (2) - ** Depends on tire size.
Swing Angle - Left / Right - 80 degrees
Choose WHEEL-TYPE LOADER 902C2 section:
Specifications
Engine
Net power - 40hp
Displacement - 147cu in
Boring - 3.4in
Stroke - 4in
Engineering model - Cat C2.4 *
The note - * Engine meets US EPA Tier 4 Final standards.
Maximum Gross Power - 42hp
Net power - 2200 rpm - SAE rating J1349 - 40hp
Net power - 2200 rpm - ISO rating 9249 - 40hp
Net power - 2200 rpm - EEC rating 80/1269 - 40hp
Operational
Operating weight - 9060lb
Transmission
Travel speed10mph
Buckets
Bucket capacity - 0.6-1.0 m3 (0.8-1.3 m3)
Hydraulic system
Hydraulic Cycle Time - Dump - 0.8 s
Hydraulic Cycle Time - Lift - 4.8 s
Major relief - 2988 psi
3rd auxiliary stream - 14 gallons per minute
Hydraulic cycle time - lower, float - 3.2 s
Service replenishment options
Cooling system - 3gal
Fuel tank - 11.4gal
Hydraulic system - 6.3gal
Machine oil - 2.4gal
Taxi
ROPS - ISO 3471: 2008
Fops - ISO 3449: 2000 Level I
Performance Specifications - High Lift
Separation force - 5170lb
Tire size - 33 degrees 15.5-16.5, 12PR
Bucket Nominal Capacity - 0.8yd3
Stand back - transport position - 52 degrees
Nominal Full Load Turnover - Bucket - 1875lb
Direct Tipping Load - Bucket - 4500lb
Full Load Static Tipping Load - Bucket - 3760lb
Nominal working load per full revolution - forks (EN 474-3: 2006, hard and flat surface, load center 500 mm [20 inches]) (80% of FTSTL) - 2410lb
Nominal working load per full revolution - forks (EN 474-3: 2006, hard and flat surface, load center 500 mm [20 inches]) (60% of FTSTL) - 1805lb
With additional counterweight - working weight - 9480lb
With additional counterweight - rated working load per full revolution - bucket - 2030lb
With additional counterweight - direct tipping load - bucket - 4840lb
With additional counterweight - static tipping load per full revolution - bucket - 4060lb
With additional counterweight - Rackback - Transport position - 52 degrees
With additional counterweight - rated working load per full revolution - forks (EN 474-3: 2006, firm and flat surface, load center 500 mm (20 inches)) (80% of FTSTL) - 2590lb
With additional counterbalance - rated working load per full turn - forks (EN 474-3: 2006, rough terrain, load center 500 mm (20 inches)) (60% of FTSTL) - 1940lb
Performance Specifications - Standard Lift
Breakout Force - 5170 lbs
Nominal bucket capacity - 0.8yd3
Tire size - 33 degrees 15.5-16.5, 12PR
Stand back - transport position - 52 degrees
Nominal Full Load Turnover - Bucket - 2,150 lbs
Direct Tipping Load - Bucket - 5,070 lbs.
Full Turn Static Tipping Load - 4,300 lb Bucket
Nominal full-load workload - forks (EN 474-3: 2006, hard and flat surface, 500 mm [20 in] center of load) (80% of FTSTL) - 2,610 pounds
Nominal full-load workload - forks (EN 474-3: 2006, hard and flat surface, 500 mm [20 in] center of load) (60% of FTSTL) - 1960 lbs
With additional counterweight - Operating Weight - 9435 lbs.
With Extra Counterweight - Nominal Working Load per Full Turn - Bucket - 2,305 lbs
With additional counterweight - direct tipping load - 5,445 lb bucket
With extra counterweight - static tipping load per revolution - bucket - 4,610 pounds
With additional counterweight - Rackback - Transport position - 52 degrees
With additional counterweight - nominal full-revolution working load - forks (EN 474-3: 2006, firm and flat surface, 500 mm (20 in) load center) (80% of FTSTL) - 2,800 pounds
With additional counterweight - nominal full-revolution workload - forks (EN 474-3: 2006, rough terrain, load center 500 mm (20 inches)) (60% of FTSTL) - 2,105 pounds
Maximum Material Density - General Purpose
Note - based on ISO 7546: 1983 and rated operating loads at full revolution and standard traction without additional counterweight
General Purpose Bucket Type
Nominal Capacity - 0.8yd3
Blade height 90 inches
Maximum Material Density - 2545 lbs / yard
Bucket Width - 70 Inches
Maximum Material Density - Lightweight Material
The note - Based on ISO 7546: 1983 and rated operating loads at full revolution and standard traction without additional counterweight
Bucket Type - Lightweight Material
Nominal Capacity - 1.3yd3
Blade Height 85 Inches
Maximum material density - 1480 lbs / yard
Bucket Width - 74 inches