Caterpillar SKID STEER LOADER 299D - catalog of spare parts
Dimensions
Total height - 13.3 feet in
Dump angle - 52 degrees
Total Track Length - 7.5 Feet in
The length of the path on earth is 5.8 feet in
Length with Bucket - 10.3 Feet in
Length without bucket - 12.7 feet in
Cab Height - 7 ft.
Ground clearance - 8.7 inches
Ground clearance at Max Lift and Dump - 8 ft.
Reach in Max Lift and Dump - 2.6 feet in
Turning radius from center - rear of machine - 72.8 inches
Bucket Finger Height - Maximum Lifting Height - 10.6 Feet
Height - Cab Top - 7 ft.
Total Length - Track - 89.4 inches
Reach at maximum lift / drop - 30.6 inches
Vehicle Width - 78 Inches
Length - Track on the ground - 69.6 inches
Length - Without Bucket - 123.5 Inches
Length - with bucket on the ground - 151.8 inches
Maximum total height - 158.4 inches
Bucket Finger Height - Carry Position - 7.9 Inches
Ground clearance at maximum lift and unload - 94.3 inches
Departure angle - 30 degrees
Maximum angle of dumping - 52 degrees
A-pillar angle - maximum height - 83 degrees
Turning radius from center - rear - 73.4 inches
Rotate Radius From Center - Coupling - 58in
Turning radius from center - bucket - 91.2 inches
Maximum reach - with parallel arms - 50.2 inches
Pin Bucket Lug - Maximum Lift Height - 15.6 Inches
Choose SKID STEER LOADER 299D section:
Specifications
engine
Engine Model - Cat® C3.8
Gross Power - 98 HP
Net power - 95 hp
Displacement - 232cu per
Hole - 3.9 inches
4.7 inch travel
Aspiration - Turbocharged
Gross Power - SAE J1995 - 98 HP
Engine Model - Cat C3.8 DIT (Turbo)
Net Power - SAE 1349 - 95 HP
Operational
Operating Weight - 10,897.5 lbs.
Fuel capacity - 31 gal
Cooling system capacity - 3.7 gallons
Hydraulic Capacity - 16.2 Gallons
Operating voltage - 12 V
Generator current strength - 100 amperes
Top Speed - Low Range - 5 mph
Top Speed - High Range - 8.5 Mph
Power train
Forward Speed - 2 speeds - 8.4 mph
Reverse Speed - 2 speeds - 8.4 mph
Forward Speed - 5.2 Mph
Speed reverse - 5.2 mph
Chassis
Ground Contact Area - 2463in2
Ground Pressure - 4.4psi
Weights
Operating Weight - 10,718 pounds
Loader
Tipping Load - 8,498.9 lbs.
Hydraulic system
Hydraulic flow (1) - standard
Hydraulic power - 44 hp
The maximum hydraulic flow of the loader is 32 gallons / min.
Loader Maximum Hydraulic Pressure - 4061 psi
Loader Hydraulic Pressure - 3335 psi
Loader Hydraulic Flow - 23 gallons / min
Hydraulic Flow (2) - High Flow XPS
Hydraulic power - Estimated - 76 hp
Hydraulic
Pump flow rate - 23 gal / min
Dimensions
Height to Cab Top - 6.91 Feet in
Ground clearance - 8.7 inches
Ground clearance at Max Lift and Dump - 7.94 feet in
Reach at Max Lift and Dump - 2.59 feet in
The length of the path on earth is 5.8 feet in
Performance characteristics
Rated Operating Power - 50% Tipping Load - 4,250 lbs
Rated Operational Power - 35% Tipping Load - 2,975 lbs.
Ground Contact Area - 2463in2
Ground Pressure - 4.4 psi
4,500 lbs nominal capacity with optional counterweight
Tipping Load - 8,500 lbs.
Breakout Force - Tilt Cylinder - 7552 lbs
Breakout Force - Lift Cylinder - 6122 lbs.
Service replenishment options
Cooling system - 4.1 gal
Fuel Tank - 32.2 gallons
Hydraulic Tank - 10.3 Gallons
Crankcase - 3.5gal
Hydraulic system - 14.5 gal
Taxi
ROPS - ISO 3471: 2008
FOPS - ISO 3449: 2005 Level I
FOPS Level II - ISO 3449: 2005 Level II